Silver niobate (AgNbO3)-based dielectric materials show great application potential in pulse power energy storage systems due to their high energy storage density.
By means of X-ray computed microtomography (XCMT), the existence of a developed porous structure with an average pore diameter of ~3.5 μm and pore content of ~1.1 vol.% has been revealed in unirradiated polytetrafluoroethylene (PTFE). It has been found that the combined action of gamma radiation (absorbed dose per PTFE of ~170 kGy) and high temperatures (327–350 °C) leads to the disappearance of the porous structure and the formation of several large pores with sizes from 30 to 50 μm in the bulk of thermal-radiation modified PTFE (TRM-PTFE). It has been established by X-ray diffraction (XRD) analysis that the thermal-radiation modification of PTFE leads to an increase in the interplanar spacings, the degree of crystallinity and the volume of the unit cell, as well as to a decrease in the size of crystals and the X-ray density of the crystalline phase in comparison with the initial polymer. It is assumed that the previously-established effect of improving the deformation-strength and tribological properties of the TRM-PTFE can be due not only to the radiation cross-linking of polymer chains but also to the disappearance of the pore system and to the ordering of the crystalline phase of PTFE.
Influence of donor (Ba) and acceptor (Ni) dopants on structure, microstructure, dielectric, ferroelectric and piezoelectric properties of (K0.5Na0.5)NbO3 ceramics have been studied. Dielectric parameters and effective d33 piezoelectric coefficients changes were observed depending on solid solutions compositions.
We have examined the effect of preparation conditions on the structure and piezoelectric characteristics of ceramic samples in the form of thin piezoelectric disks cut from large sintered (1 − x)BiScO3 - xPbTiO3 (x = 0.635–0.645) bodies. The use of chemical coprecipitation from nitrate solutions allowed us to prepare nanopowders of controlled composition and ensured better piezoelectric activity of the materials in comparison with ceramics produced by solid-state reactions. We discuss possible ways of optimizing functional parameters of piezoelectric elements from BSPT ceramics.
12 February 2004 in Journal of Solid State Electrochemistry