Since about one and half centuries ago, at the dawn of modern communications, the radio and the optics have been two separate electromagnetic spectrum regions to carry data. Differentiated by their generation/detection methods and propagation properties, the two paths have evolved almost independently until today. The optical technologies dominate the long-distance and high-speed terrestrial wireline communications through fiber-optic telecom systems, whereas the radio technologies have mainly dominated the short- to medium-range wireless scenarios. Now, these two separate counterparts are both facing a sign of saturation in their respective roadmap horizons, particularly in the segment of free-space communications. The optical technologies are extending into the mid-wave and long-wave infrared (MWIR and LWIR) regimes to achieve better propagation performance through the dynamic atmospheric channels. Radio technologies strive for higher frequencies like the millimeter-wave (MMW) and sub-terahertz (sub-THz) to gain broader bandwidth. The boundary between the two is becoming blurred and intercrossed. During the past few years, we witnessed technological breakthroughs in free-space transmission supporting very high data rates, many achieved with the assistance of photonics. This paper focuses on such photonics-assisted free-space communication technologies in both the lower and upper sides of the THz gap and provides a detailed review of recent research and development activities on some of the key enabling technologies. Our recent experimental demonstrations of high-speed free-space transmissions in both frequency regions are also presented as examples to show the system requirements for device characteristics and digital signal processing (DSP) performance.
23 December 2021 in Journal of Lightwave Technology
A roadmap for future wireless communications is expected to exploit all transmission-suitable spectrum bands, from the microwave to the optical frequencies, to support orders of magnitude faster data transfer with much lower latency than the deployed solutions nowadays. The currently under-exploited mid-infrared (mid-IR) spectrum is an essential building block for such an envisioned all-spectra wireless communication paradigm. Free-space optical (FSO) communications in the mid-IR region have recently attracted great interest due to their intrinsic merits of low propagation loss and high tolerance of atmospheric perturbations. Future development of viable mid-IR FSO transceivers requires a semiconductor source to fulfill the high bandwidth, low energy consumption, and small footprint requirements. In this context, quantum cascade laser (QCL) appears as a promisingtechnological choice. In this work, we present an experimental demonstration of a mid-IR FSO link enabled by a 4.65-μm directly modulated (DM) QCL operating at room temperature. We achieve a transmission data rate of up to 6 Gbps over a 0.5-m link distance. This achievement is enabled by system-level characterization and optimization of transmitter and receiver power level and frequency response and assisted with advanced modulation and digital signal processing (DSP) techniques. This work pushes the QCL-based FSO technology one step closer to practical terrestrial applications, such as the fixed wireless access and the wireless mobile backhaul. Such a QCL-based solution offers a promising way towards the futuristic all-spectra wireless communication paradigm by potentially supporting the whole spectrum from the MIR to the terahertz (THz).
15 September 2022 in Journal of Lightwave Technology
Free-space optics (FSO) in the mid-infrared (mid-IR) contains rich spectral resources for future ultrahigh-speed wireless communications yet is currently under-exploited. Two atmospheric transmission windows at the mid-IR, namely, the mid-wave IR (MWIR, 3–5 μm) and the long-wave IR (LWIR, 8–12 μm), show great potential in supporting free-space communications for both terrestrial and space application scenarios. Particularly, the LWIR signal with a longer wavelength has high intrinsic robustness against aerosols’ scattering and turbulence-induced scintillation and beam broadening effects, which are the main concerns hindering the wide deployment of practical FSO systems. In this context, high-bandwidth semiconductor-based mid-IR FSO transceivers will be desirable to meet the requirements of low energy consumption and small footprints for large-volume development and deployment. Quantum cascade devices, including quantum cascade lasers (QCLs) and quantum cascade detectors (QCDs), appear promising candidates to fulfill this role. In this work, we report a high-speed LWIR FSO transmission demonstration with a 9.6-μm directly-modulated (DM)-QCL and a fully passive QCD without any active cooling or bias voltage. Up to 8 Gb/s, 10 Gb/s, and 11 Gb/s signal transmissions are achieved when operating the DM-QCL at 10 °C, 5 °C, and 0 °C, respectively. These results indicate a significant step towards an envisioned fully-connected mid-IR FSO solution empowered by the quantum cascade semiconductor devices.
Room temperature surface emission is realized on a large area (1.5 mm × 1.5 mm) photonic crystal quantum cascade laser (PhC-QCL) driven under pulsed mode, at the wavelength around 8.75 μm. By introducing in-plane asymmetry to the pillar shape and optimizing the current injection with a grid-like window contact, the maximum peak power of the PhC-QCL is up to 5 W. The surface emitting beam has a crossing shape with 10° divergence.
The large mid-infrared (MIR) spectral region, ranging from 2.5 µm to 25 µm, has remained under-exploited in the electromagnetic spectrum, primarily due to the absence of viable transceiver technologies. Notably, the 8–14 µm long-wave infrared (LWIR) atmospheric transmission window is particularly suitable for free-space optical (FSO) communication, owing to its combination of low atmospheric propagation loss and relatively high resilience to turbulence and other atmospheric disturbances. Here, we demonstrate a direct modulation and direct detection LWIR FSO communication system at 9.1 µm wavelength based on unipolar quantum optoelectronic devices with a unprecedented net bitrate exceeding 55 Gbit s−1. A directly modulated distributed feedback quantum cascade laser (DFB-QCL) with high modulation efficiency and improved RF-design was used as a transmitter while two high speed detectors utilizing meta-materials to enhance their responsivity are employed as receivers; a quantum cascade detector (QCD) and a quantum-well infrared photodetector (QWIP). We investigate system tradeoffs and constraints, and indicate pathways forward for this technology beyond 100 Gbit s−1 communication.
Free space optical (FSO) communication is considered a critical part of future ICT infrastructure, particularly in non-terrestrial communication segments. In this context, the ability to achieve fast and reliable FSO propagation through long-distance atmospheric channels is the most important factor in choosing technological solutions. One property of optics directly related to this factor is the choice of wavelength. It has been identified that the mid-infrared (mid-IR) regime, which includes two atmospheric transmission windows—the mid-wave IR (MWIR, 3-5 μm) and the long-wave IR (LWIR, 8-12 μm)—can potentially offer a promising solution for achieving such performance. Additionally, viable semiconductor sources and detectors that support high-speed and efficient signal transmission are also considered critical to generating sufficient critical mass to advance the application of mid-IR FSO. Unipolar quantum optoelectronics, including quantum cascade lasers (QCL), Stark modulators, quantum cascade detectors (QCD), and quantum-well IR photodetectors (QWIP), among other components, emerge as potential candidates to build such FSO subsystems and systems. We present our recent efforts in conducting subsystem and system-level studies with different variants of these unipolar quantum optoelectronics and demonstrate the potential for feasible transmitter and receiver performance in a laboratory environment. We also discuss the key challenges and considerations of such technologies towards practical development. Finally, we summarize recent research and development efforts worldwide in advancing this highly promising direction.