The electrocardiogram (ECG) is basic equipment used in the diagnosis of cardiac illness. However, in non-developed countries, most of the population does not have access to medical tests, and many hospitals do not even have these ECGs. On the other hand, the electrical signals generated by the heart and acquired by the ECG have low power and are affected by electromagnetic interference (EMI), mainly produced by the electrical system. Filtering EMI when frequency varies is a challenging task. Within this context, this work aims to produce an easy-to-use low-cost ECG with good electromagnetic disturbances rejection. The proposed noise rejection system is composed of two moving average filters and a phase-locked-loop, namely 2MAV-PLL. The system operates with a low sampling frequency and attenuates the EMI noise present in the ECG signal regardless of the amplitude, obtaining a filtered signal with a 44-dB signal–noise ratio (SNR) between the frequencies of± 10 Hz of the fundamental frequency. Simulation and experimental results prove that the ECG system can attenuate the EMI using relatively low sampling frequency, giving adequate information for health professionals to properly evaluate an electrocardiogram.

Modern embedded systems have achieved relatively high processing power. They can be used for edge computing and computer vision, where data are collected and processed locally, without the need for network communication for decision-making and data analysis purposes. Face detection, face recognition, and pose detection algorithms can be executed with acceptable performance on embedded systems and are used for home security and monitoring. However, popular machine learning frameworks, such as MediaPipe, require relatively high usage of CPU while running, even when idle with no subject in the scene. Combined with the still present false detections, this wastes CPU time, elevates the power consumption and overall system temperature, and generates unnecessary data. In this study, a low-cost low-resolution infrared thermal sensor array was used to control the execution of MediaPipe’s pose detection algorithm using single-board computers, which only runs when the thermal camera detects a possible subject in its field of view. A lightweight algorithm with several filtering layers was developed, which allowed the effective detection and isolation of a person in the thermal image. The resulting hybrid computer vision proved effective in reducing the average CPU workload, especially in environments with low activity, almost eliminating MediaPipe’s false detections, and reaching up to 30% power saving in the best-case scenario.