Seismic performance assessment of water distribution systems (WDSs) based on hydraulic simulation is essential for resilience evaluation of WDSs under earthquake disasters. The assessment is mainly to determine how the water supply will be affected due to pipe breaks caused by the earthquake, with the water supply loss estimated based on the loss of supply to nodes. Existing research works usually use the average or overall performance metric of all user nodes as the system performance indicator without considering user nodes’ individual performance and criticality. This paper proposes a framework to evaluate the importance of user nodes considering post-earthquake rescue service and the seismic performance of individual user nodes in the WDS, which supports the pipeline renovation plan to improve the performance of critical user nodes. The importance of user nodes is evaluated by a multi-index model, including the indices for daily service, post-earthquake rescue service, and network topology influence of user nodes. These indices evaluate the importance of user nodes in terms of their roles for daily water service, emergent rescue service, and water transmission to other nodes, respectively. Fragility model of pipelines evaluates the earthquake-induced damages of the WDS, and the seismic performance assessment of the WDS system is performed by the hydraulic model of the WDS with pipeline damages. The proposed framework is implemented in an actual WDS; the results show that the importance classification to user nodes by multi-index approach can identify the critical user nodes for post-earthquake rescue service, which traditional methods may ignore. The importance classification and seismic performance of individual user nodes make it feasible to check the seismic performance of critical user nodes and formulate a targeted pipeline renovation plan to focus limited resources on critical user nodes.

Short-term water demand forecasting plays an important role in smart management and real-time simulation of water distribution systems (WDSs). This paper proposes a hybrid model for the short-term forecasting in the horizon of one day with 15 min time steps, which improves the forecasting accuracy by adding an error correction module to the initial forecasting model. The initial forecasting model is firstly established based on the least square support vector machine (LSSVM), the errors time series obtained by comparing the observed values and the initial forecasted values is next transformed into chaotic time series, and then the error correction model is established by the LSSVM method to forecast errors at the next time step. The hybrid model is tested on three real-world district metering areas (DMAs) in Beijing, China, with different demand patterns. The results show that, with the help of the error correction module, the hybrid model reduced the mean absolute percentage error (MAPE) of forecasted demand from (5.64%, 4.06%, 5.84%) to (4.84%, 3.15%, 3.47%) for the three DMAs, compared with using LSSVM without error correction. Therefore, the proposed hybrid model provides a better solution for short-term water demand forecasting on the tested cases.

With the increasingly degraded water environment, some substances will gradually accumulate in our drinking water source—the surface water, and finally threaten drinking water safety when their contents reach a certain amount. To give early warning on those potential threats to water safety, we can choose corresponding water quality control indexes, i.e. water quality factors, to take proper countermeasures by building a water quality model simulating change trend of the water source quality based on historical data, which is favorable for ensuring the water source quality.

Regular on-site inspection is crucial for promptly detecting faults in water supply networks (WSNs) and auxiliary facilities, significantly reducing leakage risks. However, the fragmentation of information and the separation between virtual and physical networks pose challenges, increasing the cognitive load on inspectors. Furthermore, due to the lack of real-time computation in current research, the effectiveness in detecting anomalies, such as leaks, is limited, hindering its ability to provide immediate and direct-decision support for inspectors. To address these issues, this research proposes a mixed reality (MR) inspection method that integrates multi-source information, combining building information modeling (BIM), Internet of Things (IoT), monitoring data, and numerical simulation technologies. This approach aims to achieve in situ visualization and real-time computational capabilities. The effectiveness of the proposed method is demonstrated through case studies, with user feedback confirming its feasibility. The results indicate improvements in inspection task performance, work efficiency, and standardization compared to traditional mobile terminal-based methods.

The allelopathy of aquatic plants which can inhibit the excessive breeding of algae is a new water quality control technology which is low-carbon and green compared with the traditional treatment methods. In this experiment, choosing the content of algal cell's chlorophyll-a as an basic indicator, the allelopathy degree of different concentrations of O-Dihydroxybenzene and Pyrogallol on algal growth and metabolism is analyzed, and choosing A560 nm as an indicator, the influence of different concentrations of O-Dihydroxybenzene and Pyrogallol on superoxide dismutase activity of Chlorella Pyrenoidosa Chick is analyzed. And to explore the relationship of allelopathy and superoxide dismutase activity, the results could be used to provide an experimental basis for the technology of allelopathy on the growth of algae control.