The nanoparticle based on natural bentonite from Pahae village had been prepared using co-precipitation method. Bentonite was dried in the oven at 100°C during a week. Bentonite is crushed using a mortal and milled by planetary ball mill to obtain the powder form. Further, the bentonite powder is activated with chemical reaction by dissolves the 50 g bentonite to 100 ml of HCl at 10 M. The magnetic stirrer was employed to mix the solution at 300 rpm and temperature 70°C. After that, the bentonite solution is washed using distilled water until the pH is neutral. The bentonite powder is calcined at temperature of 600°C for 1 hour with fix increment 150°C. Finally, the powder is given High Energy Milling (HEM) treatment for 30 minutes to obtain the particle size. The X-ray Difractometer (XRD) and Scanning Electron Microscope (SEM) were used to characterize. From the characterization results it is reported that the average of bentonite nanoparticle size is 35.26 nm and the chemical constituents of natural bentonite Pahae are Al, Si, Ca, Fe and Ti
This study aims to (1) determine an increase in collaboration and communication skills through project-based learning, (2) determine the relationship of collaboration skills and communication skills through project-based learning. The population of this research is six classes XI MIA and a sample of this research are two classes, an experiment class with project-based learning and a control class with conventional. The instrument of collaboration and communication skills are the observation sheet and questionnaire. Improved collaboration and communication skills were analyzed using normalized gain (N-gain). A collaborative relationship with communication using the correlation test. N-gain results show that project-based learning can improve student’s collaboration and communication skills, each in the medium category. The relationship between collaboration and communication skills shows a positive direction, which means that the more the collaboration skills increase, the better the student’s communication skills.
1 February 2020 in Case Studies in Thermal Engineering
Purpose of this study was to determine the mechanical properties and morphology of composite natural rubber and natural bentonite with addition of Na-bentonite filler and carbon black to natural rubber. The method is carried material mixed with filler composition variations (0,10,20,30) phr using open mill for 6 min. Results of the open mill is vulcanized at a temperature of 170 o C. Further testing mechanical properties and morphology. Results showed that the addition of Na-bentonite filler and carbon black influence on the mechanical properties of tensile strength, elongation at break, modulus of elasticity, hardness, and strong tear. Morphological results showed cavities in the rubber compound and the occurrence agglomeration.
1 January 2019 in REVIEWS ON ADVANCED MATERIALS SCIENCE
This study aims to determine the characteristics of oil palm boiler ash (OPBA) after processing with ball mill and coprecipitation methods. The method used is OPBA from a palm oil mill, processed using a ball mill for 1 hour at a speed of 250 rpm. Then prepared with the coprecipitation method by dissolving it in 2M HCl solution and NaOH solution with variations (2; 2.5; 3) M. Particles were characterized by XRD, SEM, XRF, and FTIR. XRD characterization shows the size of each crystal (83,79; 72,30 and 56,31) nm, with trigonal crystal structure with the SiO2 phase. SEM shows a homogeneous mixture. EDX shows the biggest elements are Si, O and C content. XRF shows the amount of silica is 31.45%. FTIR shows absorption peaks which are the characters of molecular vibrations of the sample.