This research contains data on the adsorption test and characterization of banana peel activated carbon as an adsorbent for water contaminated with various heavy metals. Banana peel is a common post-harvest waste, making it easy to obtain. Atomic Absorption Spectroscopy (AAS) is used to investigate the various heavy metal content in polluted water that are harmful to health, such as Mn, Fe, Zn, and Pb in concentrations of 1.351; 1.210; 17.403; and 0.210 mg/L, respectively. These metals exceed the standard limits for clean water quality that are suitable for sanitation hygiene purposes. Banana peel activated carbon samples were tested in polluted water and re-examined using AAS. The parameters used to calculate the percent adsorption of the four heavy metals were variations in adsorbent mass (0.5; 1.0; 1.5; 2.0 g), stirring speed (50; 100; 150; 200; 250 rpm), pH (4; 5; 6; 7; 8; and contact time (30; 60; 90; 120; 150 min). Scanning Electron Microscopy/X-Ray Spectroscopy Energy Dispersion (SEM/EDS) and X-Ray Diffraction (XRD) were used to characterize and determine the morphology, material content, and crystal structure formed by the samples. Brunaurer, Emmet, and Teller/Barret, Joyner, and Halenda (BET/BJH) were used to investigate the surface area, pore size, and isotherm type. This dataset is publicly available for researchers to optimize the potential of banana peel activated carbon as an adsorbent of heavy metals (Mn, Pb, Zn, Fe) in the industrial sector.
1 February 2020 in Case Studies in Thermal Engineering
Purpose of this study was to determine the mechanical properties and morphology of composite natural rubber and natural bentonite with addition of Na-bentonite filler and carbon black to natural rubber. The method is carried material mixed with filler composition variations (0,10,20,30) phr using open mill for 6 min. Results of the open mill is vulcanized at a temperature of 170 o C. Further testing mechanical properties and morphology. Results showed that the addition of Na-bentonite filler and carbon black influence on the mechanical properties of tensile strength, elongation at break, modulus of elasticity, hardness, and strong tear. Morphological results showed cavities in the rubber compound and the occurrence agglomeration.
1 January 2019 in REVIEWS ON ADVANCED MATERIALS SCIENCE
This study aims to determine the characteristics of oil palm boiler ash (OPBA) after processing with ball mill and coprecipitation methods. The method used is OPBA from a palm oil mill, processed using a ball mill for 1 hour at a speed of 250 rpm. Then prepared with the coprecipitation method by dissolving it in 2M HCl solution and NaOH solution with variations (2; 2.5; 3) M. Particles were characterized by XRD, SEM, XRF, and FTIR. XRD characterization shows the size of each crystal (83,79; 72,30 and 56,31) nm, with trigonal crystal structure with the SiO2 phase. SEM shows a homogeneous mixture. EDX shows the biggest elements are Si, O and C content. XRF shows the amount of silica is 31.45%. FTIR shows absorption peaks which are the characters of molecular vibrations of the sample.
1 January 2021 in REVIEWS ON ADVANCED MATERIALS SCIENCE
The research analyzed the physical properties of TiO2 and bentonite nanocomposite as adsorbent materials. The TiO2 synthesis method was carried out through a sol–gel process. Meanwhile the synthesis of bentonite was carried out by the ball mill, coprecipitation and addition of cetyltrimethylammonium bromide (CTAB) surfactant. X-ray diffraction nanocomposite characterization showed that the particle size was 17.13 nm. Fourier transform infrared analysis showed the required absorption peak in photocatalysis because the OH group can react with holes and prevent electron–hole pair recombination. The morphology of the nanocomposite showed the occurrence of TiO2 pillarization in bentonite. The results of the X-ray fluorescence nanocomposite showed that the content of TiO2 and SiO2 was 65.22 and 17.4%, respectively.
An edible coating based on pectin-chitosan and Cosmos caudatus leaf extract has been created. Cosmos caudatus leaf extract, which contains several bioactive compounds, aims to produce an edible coating with antibacterial properties. C. caudatus extract was incorporated at concentrations of 1, 2, and 3 g into a mixture of 1.5 g of pectin and 1 g of chitosan. The edible coating was applied to the tomatoes using the dipping method. The coated tomatoes were analyzed for 21 days at room temperature to determine the weight loss value. The edible coating was characterized, including FTIR analysis, X-ray diffraction, surface morphology, thermal stability, viscosity, and antibacterial activity. The research results reveal that C. caudatus extract contains anthocyanins with antibacterial properties, has an amorphous crystalline structure, and has a textured surface with partial aggregation. Thermal stability analysis using differential scanning calorimetry (DSC) shows a decrease in thermogravimetric (TG) values with increasing extract concentration. The optimal weight loss (6.18%) was found in the pectin-chitosan composition containing 3 g of C. caudatus extract. At this concentration, the inhibition zones against Escherichia coli and Staphylococcus aureus were 16.4 and 15.6 mm, respectively. These findings indicate that the C. caudatus leaf extract, particularly at 3 g, enhances the antibacterial properties of the edible pectin-chitosan coating, demonstrating its potential to extend the shelf life of tomatoes safely.