Solar photovoltaic (PV) systems are widely used to mitigate greenhouse gases (GHG), due to their green renewable nature. However, environmental factors such as bird drops, shade, pollution, etc., accommodation on PV panels surface reduce photons transmission to PV cells, which results in lower energy yield and GHG mitigation potential of PV system. In this study, the PV system’s energy and GHG mitigation potential loss is investigated under environmental stresses. Defects/hotspots caused by the environment on PV panel surface have unknown occurrence frequency, time duration, and intensity and are highly variable from location to location. Therefore, different concentrations of defects are induced in a healthy 12 kWp PV system. Healthy PV system has the potential to avoid the burning of 3427.65 L of gasoline by 16,157.9 kWh green energy production per annum. However, in 1% and 20% defective systems, green energy potential reduces to 15,974.3 and 12,485.6 kWh per annum, respectively. It is equivalent to lesser evasion burning of 3388.70, and 2648.64 L of gasoline, respectively. A timely solution to defective panels can prevent losses in the PV system to ensure optimal performance.
End energy user is dependent on fossil fuel-based main-grid and contributes toward greenhouse gasses (GHG) emissions. Changing its energy source will change the dynamics of the power plant, contribution towards GHG production. This case study aims to highlight the minute but positive role of a single end energy user, invisible to the main grid in GHG mitigations through photovoltaic energy source, selected among Pakistan’s top 10 most populous cities as per census 2017. Quetta is a selected city in Pakistan as the best fit location based on annual average daily solar radiations (AADSR) data retrieved from National Aeronautics and Space Administration (NASA) meteorological data. Helioscope software is used to select −15° tilt and 180° azimuthal angles, which further increased Quetta’s AADSR value from 5.54 kWh/m2/d to 5.93 kWh/m2/d. For research significance, a realistic approach is undertaken by proper selection of solar panel type based on Quetta’s annual average temperature, load categorization, user selection and inputs from a solar energy expert. Finally, initial cost, investment and GHG mitigation analysis are carried out in RETScreen Expert software, which validates the minute but the prominent role of a single, end energy user by mitigating 122 tons of CO2 in 25-year project life span. Further, the proposed project favors end-user financially by recovering its $4501 initial cost in less than four years by effectively meeting its energy demand and saving $1195 per annum.
Green energy by PV systems reduces the dependence on fossil fuel-based power plants. Maximizing green energy to meet the demand reduces the burden on conventional power plants, hence lesser burning and greenhouse gases (GHG) emissions. For this purpose, this study draws a relationship between tracking schemes of the PV systems to GHG mitigation potential. The best fit location for detailed analyses is selected among the 15 most populous cities of Australia. The solar radiation potential is increased to 7.78 kWh/m2/d through dual axes tracking compared to 7.54, 6.82, 5.94, 5.73 kWh/m2/d through the one axis, azimuth based, fixed-tilted, and fixed-horizontal surface schemes, respectively. Through the dual axes tracking scheme, a 1 MW PV system per annum energy output avoids the burning of 796,065.3 L of gasoline, 4308.7 barrels of crude oil which is equal to the mitigation of 1852.7 tCO2 equivalent GHGs. Concisely, the PV system, through its green energy output, can avoid the release of greenhouse gases from fossil-fuel plants to tackle climate change more effectively.