Energy education of the younger generation, who are the future decision makers, investors, consumers, scientists, or skilled labor force in new energy technologies, is crucial for the future of Europe and the world. However, beyond the long-term goals of energy education policies, the short-term effects on energy conservation and the promotion of renewable energy sources are equally as important. The main purpose of the paper is to identify and analyze the behavior of students (who study the issues related to energy saving and RES), in terms of energy conservation. The conducted analysis focused on examining and comparing the scope of responses of the surveyed students in individual countries, especially in the Czech Republic, Poland, and Ukraine. The survey was carried out using the computer-assisted web interview (CAWI). Descriptive and graphical methods were used to present the results. Statistical analysis of the collected data included basic measures of descriptive statistics and the chi-square test. The main results of the study are as follows: Almost 60% of the surveyed students follow the principles of energy conservation; however increased educational activities on eco-energy behaviors is recommended. The share of RES in the heating systems of the studied residential buildings is 9%, on average, with the highest percentage of houses in Poland (14%) and the lowest in Ukraine (only 2.6%). When compared with literature reports, the collect data show that educational activities can be as effective as a tool in implementing RES and pro-environmental behaviors as the government’s environmental policy and household subsidies.

Effective recovery of materials from construction and demolition waste (CDW) remains a major problem and a real challenge in terms of implementing the circular economy. In many countries, this waste is landfilled due to the lack of modern technological lines for its recovery and recycling, including the sorting of materials suitable for reuse. Understanding the environmental impact of the CDW treatment process is important as it constitutes the final stage of building life cycle assessment and the basis for eco-design of construction processes. In addition, the recovered materials can be used as raw materials for construction, thereby closing the waste loop and aligning with the circular economy concept. The purpose of this study is to compare the environmental impact of three different CDW recovery technologies in order to identify the optimal option. The analysis was performed using the life cycle assessment (LCA) methodology, SimaPro 8.1 software, and the Ecoinvent v3.8 database. 1 Mg of processed CDW was adopted as the functional unit. It was found that the process of recovering materials from CDW allows for sorting over 13% of materials for recycling and approx. 40% of raw materials for reuse (stone aggregates). The conducted analyses showed that all three installations exert a negative impact on the environment. Solution No. 2 had the lowest total environmental impact (15.96 Pt) under the assumptions and datasets used in this study, presenting average electricity and fuel consumption and average weight of sorted materials for recycling. Installation No. 3, which sorts the largest volume of materials for recycling, also used the most electricity; therefore, it could not be considered as the solution with the minimal overall environmental impact. The research revealed that the treatment of CDW in a crusher, applied at all installations, is the process stage resulting in the greatest environmental pressure (16.92 Pt). The high level of sorted recyclable waste enabled a relatively low carbon footprint for processes No. 2 and No. 3, 18.7 and 17.6 kg CO₂ eq, respectively (more than four times lower than for installation No. 1). Future analyses should focus on optimizing the CDW recovery process by avoiding the use of impact crushers, as adding more waste sorting equipment does not significantly enhance environmental benefits.

The use of fossil fuel-based energy systems that provide heat and electricity to a building has adverse environmental impacts. These impacts can be mitigated, to a certain extent, through the incorporation of renewable energy sources (RES). The primary objective of this study was to conduct an environmental assessment of the performance of energy systems in existing public facilities located in Poland. Based on the findings, we proposed and implemented changes to these systems and validated the environmental impact of the RES systems used. SimaPro 8.1 software and the Ecoinvent 3.0 database were employed for the analysis, which entailed an environmental assessment of six public facilities located in Poland. The installation of RES resulted in an average 27% reduction in electricity consumption from the national electricity grid. This reduction was observed to be the least in the hospital and the most in the religious building. This was reflected in the environmental assessment of heating systems. The implementation of RES reduced the environmental impact of the religious building by an average of 20%. Concurrently, the CO₂ emissions decreased by 35%, SO₂ by 44%, and PM₁₀ by 42%. Significant investments and the installation of advanced RES will not prevent the occurrence of unintentional environmental consequences unless the demand for electricity and thermal energy is reduced. The use of RES in the analyzed buildings and the associated avoided emissions do not entirely offset the negative emissions resulting from the utilization of other (conventional) energy sources in the analyzed energy systems of public buildings. Consequently, the analyzed facilities collectively exert a detrimental impact on the environment.

Given the growing interest among residents of large agglomerations in inhalation treatments in urban graduation towers, as well as the lack of research on the microbiological safety of brine, an attempt was made to provide new and unique information on the potential epidemiological risks that may occur in such places. The study covered one of Krakow’s brine graduation towers, opened in 2020, attracting crowds of city residents and tourists every spring/summer season. Based on a two-year microbiological study of brine, which included analysis of the presence of mesophilic and psychrophilic bacteria in it, as well as indicators of microbiological water quality, i.e., Escherichia coli, Enterococcus faecalis, Clostridium perfringens, Staphylococcus spp., and Salmonella spp., it was concluded that contamination increased periodically. According to standards for inhalation waters, acceptable counts of selected microorganisms were exceeded, especially during the holiday season. It was, undoubtedly, related to weather conditions conducive to outdoor inhalation treatments, and thus the large number of heath resort visitors present near the graduation tower. Despite the fact that our study provides epidemiologically disturbing results, it is extremely valuable because it constitutes a starting point for discussion of the health safety of urban graduation towers. The study is also an opportunity to take measures to improve the microbiological quality of the brine in the closed cycle of graduation towers.

The use of a rock-bed accumulator for a short-term heat storage and air exchange in a building facility is an economical and energy-efficient technological solution to balance and optimize the energy supplied to the facility. Existing scientific studies have not addressed, as yet, the environmental impacts of using a rock bed for heat storage. The purpose of the research is the environmental life cycle assessment (LCA) of a heat storage system in a rock-bed accumulator supported by a photovoltaic installation. The boundaries of the analyzed system include manufacturing the components of the storage device, land preparation for the construction of the accumulator, the entire construction process, including transportation of materials, and its operation in cooperation with a horticultural facility (foil tunnel) during one growing season, as well as the photovoltaic installation. The functional unit in the analysis is 1 square meter of rock-bed accumulator surface area. SimaPro 8.1 software and Ecoinvent database were used to perform the LCA, applying the ReCiPe model to analyze environmental impact. The analysis showed the largest negative environmental impact occurs during raw materials extraction and component manufacturing (32.38 Pt). The heat stored during one season (April to October) at a greenhouse facility reduces this negative impact by approx. 7%, mainly due to the reduction in the use of fossil fuels to heat the facility. A 3 °C increase in average air temperature results in an average reduction of 0.7% per year in the negative environmental impact of the rock-bed thermal energy storage system.

The objective of this study was to determine the drug resistance profile and the presence of genes that cause the ESBL mechanism in Escherichia coli isolated from brine that circulates in a closed-cycle graduation tower. A disk diffusion method was employed to evaluate antibiotic resistance and a...