The article presents the possibilities of effective management of lignocellulosic waste by including it in the circular economy. The pyrolysis process was chosen as the thermal conversion method. This approach, due to a high flexibility of the obtained products, better quality of the solid residue (char), and the lower emission of pollutants into the atmosphere, e.g., SO₂ and NO_x, is a competitive solution compared to combustion process. Wood waste from alder and pine were analyzed. As part of laboratory tests, the elementary composition was determined, i.e., C, H, N, S, and O. The pyrolysis process was carried out at a temperature of 600 °C on an experimental stand for the conversion of solid fuels in a stationary bed. For the obtained data, using the Ansys Chemkin-Pro calculation tool, the detailed chemical composition of gaseous products of the pyrolysis process was modeled for a varying temperature range and residence time in the reactor. The studies have shown that for certain process conditions it is possible to obtain a high calorific value of pyrolytic gas, up to 25 MJ/m³.

This paper presents an assessment of the impact of the COVID-19 pandemic on the waste management sector, and then, based on laboratory tests and computer calculations, indicates how to effectively manage selected waste generated during the pandemic. Elemental compositions—namely, C, H, N, S, Cl, and O—were determined as part of the laboratory tests, and the pyrolysis processes of the above wastes were analysed using the TGA technique. The calculations were performed for a pilot pyrolysis reactor with a continuous flow of 240 kg/h in the temperature range of 400–900 °C. The implemented calculation model was experimentally verified for the conditions of the refuse-derived fuel (RDF) pyrolysis process. As a result of the laboratory tests and computer simulations, comprehensive knowledge was obtained about the pyrolysis of protective masks, with particular emphasis on the gaseous products of this process. The high calorific value of the pyrolysis gas, amounting to approx. 47.7 MJ/m³, encourages the management of plastic waste towards energy recovery. The proposed approach may be helpful in the initial assessment of the possibility of using energy from waste, depending on its elemental composition, as well as in the assessment of the environmental effects.

This review presented a comprehensive analysis of recent developments in research regarding the use of lignocellulosic biomass products in the iron and steel industry. The role of lignocellulosic biomass used as a source of energy as well as reducing agents in iron and steel sector in the era of energy crisis served as the foundation for this review. Attention has been paid to different biomass characteristics as well as pretreatment methods and conversion products of biomass. The present review also included some issues of energy management system in the steel industry. Furthermore, the possibilities of replacing fossil energy carriers with lignocellulosic biomass in the steel and iron industry was reviewed focusing on advantages, challenges, and future prospects. The present process and product quality criteria, which biomass-derived fuels must also meet, was discussed. This paper compiled the most current developments in biomass metallurgical research to serve as a source for the theoretical foundation as well as for the development of practical applications. The novelty of this study lies in the comprehensive discussion of the lignocellulosic biomass application in the iron and steel industry that are so far unpublished.

The main goal of the study was to assess the possibility of practical use of products of pyrolysis of refuse-derived fuel (RDF), i.e., pyrolysis gas, biochar and pyrolysis oil, as an alternative to standard fossil fuels. The subject matter of the paper reaches out to the challenges faced by the global economy, not only in the context of the energy crisis, but also in the context of the energy transformation currently beginning in Europe. The increase in fuel and energy prices prompts countries to look for alternative solutions to Russian minerals. At the same time, the growing amount of municipal waste forces the implementation of solutions based on energy recovery (the amount of municipal waste per EU inhabitant in 2021 is 530 kg). One such solution is pyrolysis of RDF, i.e., fuels produced from the over-sieve fraction of municipal waste. In Poland, insufficient processing capacity of thermal waste conversion plants has led to significant surpluses of RDF (1.2 million Mg of undeveloped RDF in Poland in 2021). RDF, due to their high calorific value, can be a valuable energy resource (16–18 MJ/k). This issue is analyzed in this study.

Considering the rapid global shift towards electric mobility and the growing importance of life-cycle assessments (LCAs) in policy and investment decisions, a critical examination of the methodological challenges and broader implications of electric vehicle (EV) life-cycle assessments is both timely and necessary. While numerous studies have assessed the environmental impacts of EVs using LCA, there remains a lack of consolidated insight into how methodological inconsistencies, particularly in system boundaries, functional units, and data sources, affect the comparability and policy relevance of results. This article addresses this gap by presenting a narrative review of LCA applied to EVs, with a focus on methodological approaches and environmental impact categories. The review aims to synthesize current knowledge, identify prevailing research trends, and highlight key methodological challenges in the LCA of EVs. A structured search was conducted using the Scopus database, initially yielding 1926 publications through a broad search strategy. To improve relevance and reduce the number of marginally related articles, the search was refined to include only article titles, resulting in 187 studies selected for detailed analysis. The VOSviewer software was employed to perform bibliometric and co-occurrence analysis, revealing key clusters in the literature related to battery production, electricity mix, and recycling.

The aim of the article is to analyse the impact of selected conditions on the use of municipal solid waste in energy production processes. The authors in this publication indicated that the factors determining the effective use of solid municipal waste may be, in particular, formal and legal conditions, methods used in the processes of thermal waste transformation, recovery logistics or emergency situations such as pandemics or armed conflicts. Their knowledge can be very useful in the processes of the effective use of municipal waste for the production of thermal energy, especially in the current period of the energy crisis faced by most EU countries. This paper also emphasizes the importance of RDF (refuse-derived fuel) for the thermal energy sector, which can be used both in large combustion plants and in less powerful facilities, including local heating and combined heat and power plants as an alternative to traditional fossil fuels. The article was prepared by means of the systematic literature review (SLR) method, utilising the Scopus database and secondary sources.