Small enterprises play a major role in small and medium sized enterprises (SMEs) sector, which play a decisive role in economic development and economic condition of countries. For example, in the European Union, SMEs contribute to over 99% of all enterprises and more than 100 million jobs, representing 67% of private sector employment. The paper uses the results of two direct studies of small and medium sized enterprises conducted in 2006-7 and 2013. The aim of this paper is to point out and discuss the competitiveness determinants in polish small companies

The article presents the possibilities of effective management of lignocellulosic waste by including it in the circular economy. The pyrolysis process was chosen as the thermal conversion method. This approach, due to a high flexibility of the obtained products, better quality of the solid residue (char), and the lower emission of pollutants into the atmosphere, e.g., SO₂ and NO_x, is a competitive solution compared to combustion process. Wood waste from alder and pine were analyzed. As part of laboratory tests, the elementary composition was determined, i.e., C, H, N, S, and O. The pyrolysis process was carried out at a temperature of 600 °C on an experimental stand for the conversion of solid fuels in a stationary bed. For the obtained data, using the Ansys Chemkin-Pro calculation tool, the detailed chemical composition of gaseous products of the pyrolysis process was modeled for a varying temperature range and residence time in the reactor. The studies have shown that for certain process conditions it is possible to obtain a high calorific value of pyrolytic gas, up to 25 MJ/m³.

This paper presents an assessment of the impact of the COVID-19 pandemic on the waste management sector, and then, based on laboratory tests and computer calculations, indicates how to effectively manage selected waste generated during the pandemic. Elemental compositions—namely, C, H, N, S, Cl, and O—were determined as part of the laboratory tests, and the pyrolysis processes of the above wastes were analysed using the TGA technique. The calculations were performed for a pilot pyrolysis reactor with a continuous flow of 240 kg/h in the temperature range of 400–900 °C. The implemented calculation model was experimentally verified for the conditions of the refuse-derived fuel (RDF) pyrolysis process. As a result of the laboratory tests and computer simulations, comprehensive knowledge was obtained about the pyrolysis of protective masks, with particular emphasis on the gaseous products of this process. The high calorific value of the pyrolysis gas, amounting to approx. 47.7 MJ/m³, encourages the management of plastic waste towards energy recovery. The proposed approach may be helpful in the initial assessment of the possibility of using energy from waste, depending on its elemental composition, as well as in the assessment of the environmental effects.

The contemporary economies focus on increasing the potential of innovation of the companies functioning in the above economies, especially small and medium enterprises (SMEs) which constitute 99% of companies operating in the European Union. Particular attention should be paid to small companies being the dominant ones in this sector. Recognition of sources of the undertaken innovative activities by small companies will enable to provide a more direction-oriented support and offer for this scale of companies. The key objective of the article is identification of the sources of innovation of small enterprises and indicating the directions of changes in this area in the researched period. The conclusions were drawn based on the results of two own researches relating to innovativeness and competitiveness of small enterprises conducted in 2006/2007 and in 2013

This review presented a comprehensive analysis of recent developments in research regarding the use of lignocellulosic biomass products in the iron and steel industry. The role of lignocellulosic biomass used as a source of energy as well as reducing agents in iron and steel sector in the era of energy crisis served as the foundation for this review. Attention has been paid to different biomass characteristics as well as pretreatment methods and conversion products of biomass. The present review also included some issues of energy management system in the steel industry. Furthermore, the possibilities of replacing fossil energy carriers with lignocellulosic biomass in the steel and iron industry was reviewed focusing on advantages, challenges, and future prospects. The present process and product quality criteria, which biomass-derived fuels must also meet, was discussed. This paper compiled the most current developments in biomass metallurgical research to serve as a source for the theoretical foundation as well as for the development of practical applications. The novelty of this study lies in the comprehensive discussion of the lignocellulosic biomass application in the iron and steel industry that are so far unpublished.