Dwi Rahmalina

Dr. Dwi Rahmalina


Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications

1 October 2020 in International Journal of Hydrogen Energy
Verified
Journal Article
Closed access
DRDwi Rahmalina
Dwi Rahmalina
RRReza Abdu Rahman
Reza Abdu Rahman
ASAgri Suwandi
Agri Suwandi
ISIsmail
Ismail

23 September 2021 in EUREKA: Physics and Engineering
Verified
Journal Article
Open access
PDF file
DRDwi Rahmalina
Dwi Rahmalina
DADwi Chandra Adhitya
Dwi Chandra Adhitya
RRReza Abdu Rahman
Reza Abdu Rahman
IIIsmail Ismail
Ismail Ismail
Paraffin is well known thermal energy storage with the high latent heat of fusion. Unfortunately, low thermal conductivity and low melting temperature inhibit large-scale applications for lower temperature applications like solar water heaters and desalination. The addition of high thermal conductivity material can increase the thermal conductivity of paraffin and increase the melting temperature of paraffin. In this study, a new approach is taken by using volcanic sand as thermal conductivity enhancement material. The properties of the sand are examined. The chemical composition of the sand is dominated by Fe (51.23 %), Fe2O3 (23.24 %) and SiO2 (11 %), which are known as good thermal conductivity materials. Six different compositions of paraffin/sand (weight ration) are tested to observe the melting and vapor temperature of the composite. Adding sand (with granule size of 44 µm) by 30 wt % can accelerate the charging rate by 25 % compared to pure paraffin, where the discharging rate is increased significantly by 17.8 %. The supercooling degree of the composite is only 1 °C, where pure paraffin has a supercooling degree by 8 °C. The charging and discharging characteristics for each sample are discussed in detail within the article. Overall, the addition of volcanic sand improves paraffin's charging and discharging rate, reducing the supercooling degree and can be considered a convenient method to improve the paraffin performance as latent heat storage

1 January 2023 in AIMS Materials Science
Verified
Journal Article
Open access
PDF file
BSBudhi Muliawan Suyitno
Budhi Muliawan Suyitno
DRDwi Rahmalina
Dwi Rahmalina
RRReza Abdu Rahman
Reza Abdu Rahman
Low-temperature latent heat storage (LHS) systems are suitable for incorporating paraffin as the storage material. However, they face difficulty in actual implementation due to low thermal conductivity (TC). The present study used volcanic ash as an environmentally friendly and cost-effective material to increase the TC of paraffin. Three composites of paraffin/ash were prepared with ash proportions of 10 wt%, 30 wt% and 50 wt%. Characterizations were done to evaluate the average TC and properties. Thermal performance evaluation was conducted by analyzing the static charge/discharge cycle. The average TC for paraffin was 0.214 W/m·K. Adding volcanic ash improved the TC to 19.598 W/m·K. It made the charge/discharge performance of the composite better than that of pure paraffin. The charge rate for the composite ranged from 3.83 ℃/min to 5.12 ℃/min. The highest discharge rate was obtained at 4.21 ℃/min for the composite paraffin50/ash50. The freezing temperature for the composite is influenced by the ash proportion, which can be taken as a suitable approach to adjust the freezing point of paraffin-based thermal energy storage (TES). The detailed results for the characterization and thermal performance evaluation are described thoroughly within the article. The overall result indicates that volcanic ash is applicable for improving the TC and charge/discharge rate of paraffin-based TES.

30 December 2022 in Eastern-European Journal of Enterprise Technologies
Verified
Journal Article
Open access
PDF file
BSBudhi Muliawan Suyitno
Budhi Muliawan Suyitno
RRReza Abdu Rahman
Reza Abdu Rahman
HSHendri Sukma
Hendri Sukma
DRDwi Rahmalina
Dwi Rahmalina
The reflector durability is essential to maintain suitable photo-to-thermal conversion in concentrated solar power plants. The present study evaluates the impact of environmental exposure and accelerated aging of the reflector material. The study is conducted to assess the reflector material's durability to withstand environmental exposure and accelerated aging test. The evaluation is conducted using four different reflector materials commonly used in concentrated solar power: stainless steel and silvered-glass mirror (solid-state reflector), aluminum and silvered-polymer film (sheet-based reflector). The environmental exposure and accelerated aging test are conducted for 1,080 hours according to the standard reference of ISO 8565:2011 and ASTM B117–11. The mass loss after exposure is used as a reference to determine the corrosion rate for each reflector. Further observation is conducted by using microscope light to observe the effect of exposure on the surface of the reflector. Each reflector indicates a different corrosion rate which implies different weather resistance for each reflector type. The highest corrosion rate is found on aluminum film, with a value of 295.8 g/m2.year. The accelerated aging test through neutral salt spray demonstrates that a metallic reflector has a higher corrosion rate compared to a silvered-glass mirror which uses silicon dioxide as the top coating. Microscope observation demonstrates that suitable protection from soiling elements for the silvered-glass mirror is mainly caused by the presence of silicon dioxide on the top surface of this reflector. The assessment suggests that a suitable coating can be developed to be used for reflector protection. Furthermore, the corrosion mechanism is observed clearly, which can be referred to the synthesis of new reflective material that withstands environment and salt exposure.

28 February 2023 in International Journal of Heat and Technology
Verified
Journal Article
Open access
BSBudhi Muliawan Suyitno
Budhi Muliawan Suyitno
DRDwi Rahmalina
Dwi Rahmalina
IIIsmail Ismail
Ismail Ismail
RRReza Abdu Rahman
Reza Abdu Rahman