An X-ray diffraction (XRD) analysis was conducted after separating clay particles from three shards, to analyze the production technique of black pottery excavated from a historical site of ancient Baekje in Seoul, South Korea. Through the analysis, clay minerals and iron oxides that were not recognized in the XRD patterns of the bulk powder samples were identified. A pottery type with a blackened portion from the surface to the margin and the core was estimated to have been produced in a reduction firing environment of less than 900 °C, by detecting illite and magnetite. As for the other blackened pottery, a brown soil color remained in the core, and the presence of illite and kaolin was confirmed. In addition, while magnetite was detected on the black surface and margin, hematite was detected in the core. These results confirm that this type of blackened pottery was produced through reduction firing at a temperature below 550 °C. In particular, the results indicate that there is a new category of pottery, produced by firing at lower temperatures in a reduction atmosphere, previously not reported by research on ancient Baekje black pottery, which could be discovered due to its specific clay particles.
The Afrasiab murals discovered in the northeast of Samarkand, Uzbekistan—the center of the ancient Silk Road—are presumed to date to the mid-seventh century during the Sogdian era. Although previous studies have examined the primary materials of the pigments used in these murals using chemical and microscopic analyses, in-depth investigations of the pigment raw material composition have not been conducted to verify the results of these studies. We applied X-ray diffractometry, Raman spectroscopy, and scanning electron microscopy in conjunction with energy-dispersive X-ray spectroscopy for the first time to identify the raw materials of ancient pigments in fragments obtained from the Afrasiab murals. The results show that lazurite, cinnabar, and amorphous carbon were used as blue, red, and black pigments, respectively. Moreover, we identified that pigments were not directly painted on the wall surface; instead, they were painted on a white undercoat of gypsum plaster, similar to other ancient Silk Road wall paintings. The results of this study can benefit the provision of more accurate information with regard to the composition of raw materials and further support the selection of appropriate substances for the purposes of conservation and restoration of Afrasiab murals.
The magnetic properties and mineral composition of black burnished pottery and reddish-brown pottery with soot unearthed from Pungnaptoseong, and restored black burnished pottery were investigated to determine the black coloring mechanism and firing condition. Results indicate that an increase in the amount of magnetic iron oxide (especially Fe₃O₄) by the thermal reduction reaction of hematite influences the development of black color on the surface. Furthermore, for each sample, the black surface was determined to contain the highest amount of magnetic iron oxide, followed by the black to dark gray matrix, and then the brownish matrix. These results suggested that the ancient black burnished pottery was produced by a stronger reduction reaction on the surface, as compared to the matrix during the firing process. Further, the pottery with a black to dark gray matrix was produced through intense and prolonged reduction firing, compared to the pottery with a brownish matrix.