Two ferrite ceramic materials, MgFe2O4 and MnFe2O4, were successfully fabricated by a conventional sintering of nanosized powders (at 1373 K for 2 h) synthesized by soft mechanochemical route. The particle size and morphology of powders were studied using X-ray diffraction (XRD) and transmission electron microscopy (TEM). XRD analysis was carried out for the determination of phase purity, crystal structure and average crystallite size of sintered ferrites. Both mechanosynthesized ferrite samples show mean crystallite sizes in the nm-range. Over the frequency range of 100 Hz to 1 MHz, impedance spectra of prepared ferrite ceramics are investigated at and above room temperature. Changes in the impedance plane plots with temperature have been discussed and correlated to the microstructure of materials. An equivalent circuit model is applied to explore the electrical parameters (resistance and capacitance) associated with grains and grain boundaries. Complex impedance analysis indicates the dominance of grain boundary effects which control the overall electrical behaviour of studied ferrites. The decrease in grain boundary resistance with temperature suggests a thermally activated conduction mechanism.
23 January 2015 in Journal of Materials Science: Materials in Electronics
In recent years, the use of biological molecules has offered exciting alternatives to conventional synthetic methods. Specific methods use various biological templates to direct the deposition and patterning of inorganic materials. Here we have established a new electrical model of microtubules as a biological nanoscale circuit based on polyelectrolyte features of cylindrical biopolymers. Our working hypothesis is that microtubules play an active role in sub-cellular computation and signaling via electronic and protonic conductivity and can thus be made useful in hybrid materials that offer novel electronic characteristics. We verify these hypotheses both computationally and analytically through a quantitative model based on the atomic resolution structures of the key functional proteins.
In this paper, circuit implementation of a leaky integrate-and-fire neuron model with a volatile memristor was proposed and simulated in the SPICE simulation environment. We demonstrate that simple leaky integrate-and-fire (LIF) neuron models composed of: volatile memristor, membrane capacitance and neuron resistance can mimic spatial and temporal integration, firing function and signal decay. The existing leaky term originates from the recovery of the initial resistive state in the memristor in the spontaneous reset cycle, which is essential for emulating the forgetting process in all-memristive neural networks (MNNs). Furthermore, a diffusive perovskite memristor was used to validate the model where intrinsic memristors’ capacitance acts as neuron membrane capacitance. Good agreement with experimental and simulation results was observed. Volatility, as an inherent property of specific memristors, eliminates the need for usage of an additional peripheral circuit which will reinitialize device state, thus allowing the development of energy-efficient, large scale complex memristive neural networks. The presented circuit level model of LIF neurons can facilitate the design of MNNs.
In this study, we report on the room-temperature characteristics of an impedance-type humidity sensor based on porous tin oxide/titanium oxide (SnO2/TiO2) composite ceramics modified with Mo and Zn. The SnO2/TiO2-based composites synthesized in the solid-state processing technique have been structurally characterized using X-ray diffraction, scanning electron microscopy, energy dispersive, and Raman spectroscopy. Structural analysis indicated the desired porous nature of the synthesized ceramics for sensing applications, with an average crystallite size in the nano range and a density of about 80%. The humidity-sensing properties were evaluated within a wide relative humidity range from 15% to 85% at room temperature, and the results showed that a better humidity response had a sample with Mo. This humidity-sensing material exhibits a linear impedance change of about two orders of magnitude at the optimal operating frequency of 10 kHz. Furthermore, fast response (18 s) and recovery (27 s), relatively small hysteresis (2.8%), repeatability, and good long-term stability were also obtained. Finally, the possible humidity-sensing mechanism was discussed in detail using the results of complex impedance analysis.
In this paper, we performed analytical, numerical and experimental studies on the generation of soliton waves in discrete nonlinear transmission lines (NLTL) with varactors, as well as the analysis of the losses impact on the propagation of these waves. Using the reductive perturbation method, we derived a nonlinear Schrödinger (NLS) equation with a loss term and determined an analytical expression that completely describes the bright soliton profile. Our theoretical analysis predicts the carrier wave frequency threshold above which a formation of bright solitons can be observed. We also performed numerical simulations to confirm our analytical results and we analyzed the space–time evolution of the soliton waves. A good agreement between analytical and numerical findings was obtained. An experimental prototype of the lossy NLTL, built at the discrete level, was used to validate our proposed model. The experimental shape of the envelope solitons is well fitted by the theoretical waveforms, which take into account the amplitude damping due to the losses in commercially available varactors and inductors used in a prototype. Experimentally observed changes in soliton amplitude and half–maximum width during the propagation along lossy NLTL are in good accordance with the proposed model defined by NLS equation with loss term.