This paper presents results of experimental investigations and numerical simulations of a vertical-axis H-type wind turbine, considering the influence of propeller blade pitch angle on turbine characteristics. An innovative airfoil profile based on a modified symmetric NACA0015 airfoil profile was used as the designed blade profile, which was tested in a wind tunnel over a range of Reynolds numbers from 50,000 to 300,000. The phenomenon of angle-of-attack variation and the resulting forces acting on the blades, particularly in the horizontal configuration and vertical axis of rotation, were discussed. Series of experiments were conducted on a 1:1 scale four-bladed turbine model in the wind tunnel to determine the characteristics, specifically the power coefficient distribution over the tip speed ratio for various Reynolds numbers and blade pitch angles. Subsequently, the turbine was modeled using Qblade software, and a series of calculations were performed under the same conditions. The numerical results were validated with the experimental data.

The article presents the negative aspects of the influence of static and dynamic acceleration on the accuracy of pressure measurement for a selected type of transmitter. The influence of static accelerations from catalog notes was shown and compared with the tests results for a few selected sensors. The results of research on the influence of dynamic acceleration for various types of its variability for selected converters are presented. Moreover, a method of measurement patented by the authors that uses a complex transducer is shown. The method allows for more accurate measurements on moving objects. The tests were performed based on the proposed method. The obtained results of the influence of acceleration on the classical sensor as well as the construction using the proposed method are shown. The paper presents approximate pressure measurement errors resulting from the influence of acceleration. For example, errors in measuring the speed of an airplane may occur without the proposed method. The last part of the article presents a unique design dedicated to a multi-point pressure measurement system, which uses the presented method of eliminating the influence of accelerations on the pressure measurement.

MEMS (micro-electro-mechanical system) gyroscopes and accelerometers are used in several applications. They are very popular due to their small size, low price, and accessibility. The design of MEMS accelerometers enables the measurement of vibrations, with frequencies from tenths of hertz to even 1 kHz. MEMS gyroscopes can be applied to measure angular rates, and indirectly also angular oscillations with frequencies similar to accelerometers. Despite significant stochastic errors, MEMS sensors are used not only in popular domestic appliances (e.g., smartphones) but also in safety-critical units, such as aeronautical attitude and heading reference systems (AHRSs). In engineering, methods of stochastic properties analysis are important tools for sensor selection, verification, and the design of measurement algorithms. In this article, three methods used for the analysis of stochastic properties of sensors are presented and comparative analyses are shown. The applied measurement frequencies (1 kHz) were much higher than those typically found in MEMS sensor applications. Additionally, an exemplary analysis of temperature drift frequency, as well as the possibility for the synthesis of complementary filter parameters with the use of the described methods, is shown. Assessment of the stochastic properties of MEMS accelerometers and gyroscopes was performed under both constant and variable temperature conditions (during warm-up after switching on) with the use of classic methods, such as power spectral density (PSD) and Allan variance (AV), as well as the less known but very promising generalized method of wavelet moments (GMWM).

In the near future, the integration of manned and unmanned aerial vehicles into the common airspace will proceed. The changes taking place mean that the safety of light aircraft, ultralight aircraft and unmanned air vehicles (UAV) will become an increasing problem. The IDAAS project (Intruder Detection And collision Avoidance System) meets the new challenges as it aims to produce technically advanced detection and collision avoidance systems for light and unmanned aerial vehicles. The work discusses selected elements of research and practical tests of the intruder detection vision system, which is part the of IDAAS project. At the outset, the current formal requirements related to the necessity of installing anticollision systems on aircraft are presented. The concept of the IDAAS system and the structure of algorithms related to image processing are also discussed. The main part of the work presents the methodology developed for the needs of dedicated flight tests, its implementation and the results obtained. The initial tests of the IDAAS system carried out on an ultralight aircraft generally indicate the possibility of the effective detection of intruders in the airspace with the use of vision methods, although they also indicated the existence of conditions in which this detection may prove difficult or even impossible.

Purpose: The purpose of this paper is to describe simulation research carried out for the needs of multi-sensor anti-collision system for light aircraft and unmanned aerial vehicles.Design/methodology/approach: This paper presents an analysis related to the practical possibilities of detecting intruders in the air space with the use of optoelectronic sensors. The theoretical part determines the influence of the angle of view, distance from the intruder and the resolution of the camera on the ability to detect objects with different linear dimensions. It has been assumed that the detection will be effective for objects represented by at least four pixels (arranged in a line) on the sensor matrix. In the main part devoted to simulation studies, the theoretical data was compared to the obtained intruders’ images. The verified simulation environment was then applied to the image processing algorithms developed for the anti-collision system.Findings: A simulation environment was obtained enabling reliable tests of the anti-collision system using optoelectronic sensors.Practical implications: The integration of unmanned aircraft operations in civil airspace is a serious problem on a global scale. Equipping aircraft with autonomous anti-collision systems can help solve key problems. The use of simulation techniques in the process of testing anti-collision systems allows the implementation of test scenarios that may be burdened with too much risk in real flights.Social implications: This paper aims for possible improvement of safety in light-sport aviation.Originality/value: This paper conducts verification of classic flight simulator software suitability for carrying out anti-collision systems tests and development of a flight simulator platform dedicated to such tests.

The aim of this study is to demonstrate the applicability of contemporary optoelectronic systems supported by image processing algorithms in aviation. Optoelectronic systems can support the pilot’s work or the work of an Unmanned Aerial Vehicle (UAV) operator after being installed in the cockpit of the pilot or in a ground station. The origin of the problem is related to the aspects of safe operation of the aircraft in the conditions of dynamically changing ambient light observed by the aircraft pilot or operator monitoring the monitor at the ground station and observing the image from the camera installed on the UAV. The proposed solution is to help avoid situations in which the pilot’s/operator’s situational awareness deteriorates due to strong optical phenomena.