Yubin Wang

Dr. Yubin Wang


Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 August 2022 in Fractal and Fractional
Verified
Journal Article
Open access
PDF file
XWXufu Wang
Xufu Wang
CCChang Chen
Chang Chen
YWYubin Wang
Yubin Wang
Porous alumina was prepared by the sacrificial template approach using 30 vol.%, 50 vol.%, and 70 vol.% of carbon fibers and graphite as pore formers. In order to determine the pore size distribution, porosity, most probable pore size, and median pore size, a mercury intrusion porosimeter (MIP) was used. The surface fractal dimensions (Ds) of porous alumina with various pore formers were assessed based on MIP data. The findings revealed that the pore size distribution of the prepared porous alumina was either bimodal or trimodal at 50 vol.% of the pore formers, and unimodal at 30 vol.% and 70 vol.% of the pore formers in the raw materials. The porous alumina’s pore structure and morphology varied depending on the volume content of the pore formers and their shapes. The porosity and pore size of the porous alumina increased with the increase in carbon fiber content because the carbon fiber was unfavorable to the densification of the initial billet before sintering. After sintering, there were no residual pore formers other than alumina in the samples. The pore structure of the porous alumina samples showed prominent fractal characteristics, and its DS decreased with the increase in the pore former content. The samples’ Ds was highly negatively correlated with the pore structure parameters, and was positively correlated with the flexural strength.

9 October 2022 in Fractal and Fractional
Verified
Journal Article
Open access
PDF file
CCChang Chen
Chang Chen
XDXuecheng Ding
Xuecheng Ding
YWYubin Wang
Yubin Wang
ZLZhixing Luo
Zhixing Luo
PZPeiyu Zhai
Peiyu Zhai
Porous alumina was prepared via a sacrificial template method using alumina as the matrix and starch and carbon fibers as the pore-forming agents. After sintering, no residual pore-forming agents were present. The density, porosity, and pore structure of the samples were measured using the Archimedes’ method and mercury intrusion porosimetry (MIP). The results showed that the pore size distribution of porous alumina was double-peak when the content of the pore-forming agent was 20, 30, or 50 vol.%, but was single-peak when the content was 40 vol.%. A fractal model based on the measured MIP data was used to calculate and evaluate the fractal dimension (Ds) of porous alumina. The Ds values decreased with an increase in the pore-forming agent content. Furthermore, Ds was negatively correlated with porosity, most probable pore size, and median pore diameter and positively correlated with the bending strength of porous alumina. Since porous alumina has obvious fractal characteristics, the fractal theory can be used to quantitatively describe its complex distribution.

13 March 2025 in Environmental Science & Technology
Verified
Journal Article
Closed access
DLDashi Lei
Dashi Lei
YZYiyao Zhang
Yiyao Zhang
XSXiaofei Sun
Xiaofei Sun
LLLiqin Li
Liqin Li
QZQingchao Zhao
Qingchao Zhao
JZJay Zhang
Jay Zhang

6 September 2022 in Fractal and Fractional
Verified
Journal Article
Open access
PDF file
LFLitong Fang
Litong Fang
CCChang Chen
Chang Chen
YWYubin Wang
Yubin Wang
Porous alumina ceramics with different porosities were prepared via atmospheric pressure sintering using a sacrificial template method with alumina powder as the raw material and carbon fiber (CF) and graphite as pore-forming agents. The effects of the contents and ratios of the pore-forming agents and the aspect ratios of CF on the microstructure, mechanical properties, pore size, and pore-size distribution of the porous alumina samples were investigated. In addition, the surface fractal dimension (Ds) of porous alumina samples with different pore-forming agents was evaluated based on the mercury intrusion porosimetry data. The pore-size distribution of the prepared porous alumina samples showed single, double, or multiple peaks. The pore structure of the samples maintained the fibrous shape of the original CF and the flake morphology of graphite with a uniform pore-size distribution, but the pore structure and morphology were different. With the increase in the content of the pore-forming agent, the porosity of the samples gradually increased to a maximum of 63.2%, and the flexural strength decreased to a minimum of 12.36 MPa. The pore structure of the porous alumina samples showed obvious fractal characteristics. Ds was closely related to the pore structure parameters of the samples when the content of the pore-forming agent was 70 vol.%. It decreased with an increase in the sample porosity, most probable pore size and median pore size, but increased with an increase in the sample flexural strength.

1 January 2022 in Buildings
Verified
Journal Article
Open access
PDF file
CCChang Chen
Chang Chen
RZRuyi Zhang
Ruyi Zhang
LZLi Zhou
Li Zhou
YWYubin Wang
Yubin Wang
Waste tires/sand-based autoclaved aerated concrete (SAAC) composites were prepared by mixing waste tires, which have different particle sizes and content. The physical performance, mechanical properties, freeze–thaw resistance, impermeability performance, phase composition, and microstructure of waste tires/sand-based autoclaved aerated concrete composite materials were examined. The results demonstrated that the 750-μm-sized waste tire particles on the surface of the SAAC composite did not agglomerate. Moreover, these particles did not damage the pore structure of the composites. The SAAC composites, with a relatively high compressive strength and low mass-loss rate, were obtained when the contents of waste tire particles ranged from 1.0 to 2.5 wt.%. For composites prepared with 2.0 wt.% of 750-μm-sized waste tire particles, the optimal compressive and flexural strength values were 3.20 and 0.95 MPa, respectively. The increase in the rate of water absorption on SAAC composites was lowest (i.e., 16.3%) when the soaking time was from 24 to 120 h.

10 November 2020 in Minerals
Verified
Journal Article
Open access
PDF file
YWYubin Wang
Yubin Wang
XMXinyu Mao
Xinyu Mao
Wei XiaoWei Xiao
Wei Xiao
WWWangbo Wang
Wangbo Wang
Magnetization technology has been widely used in various transportation pipeline anti-scaling and descaling processes due to its simple equipment, low operating cost and low secondary pollution. To resolve structural pipeline issues in concentrations, the effects of magnesium salt concentration on conductivity, pH value and calcium ion concentration of a magnetized calcium chloride sodium bicarbonate mixed solution were studied. The results indicated that 4.0% MgSO4 had the greatest anti-scaling effect under dynamic water conditions, which increased the calcium concentration of the mixed solution by 5.93%. Furthermore, the synergistic effects of 5.0% magnesium carbonate on the scaling of calcium carbonate were the largest, which reduced the calcium concentration of the mixed solution by 22.19%. Scanning electron microscope (SEM) and Raman spectra showed that magnesium carbonate reduced the effects of magnetization because it inhibited the formation of vaterite-type calcium carbonate and promoted the formation of calcite-type calcium carbonate. Magnesium sulfate can improve the anti-scaling effects of magnetization because it promotes the formation of vaterite calcium carbonate with high solubility. The results of this study can provide a theoretical basis for the scaling process and dissolution behavior regulation of calcium carbonate and have an important reference significance for scale prevention and scale removal in concentrator pipelines.