A courtyard is an essential space for natural lighting and natural convective ventilation of residential buildings in hot-humid climates. This study focuses on the internal courtyard configuration on the thermal performance of long strip houses (LSH) in the hot-climate area of Hainan Island, China. The aim is to identify the best design parameters for the courtyard to improve thermal comfort in modern LSH design. Appropriate strategies, including Mahoney table, field investigation, and CFD simulation, are used to determine thermal performance. As a result, the design guidelines of the courtyard are proposed to optimize the thermal comfort towards energy saving. The study reveals the spatial characteristics and climate regulation of internal courtyards in traditional LSH. In addition, the simulation results show that the enclosure with a shaded cover and a high ratio of H/D is conducive to thermal environment and ventilation, and the section of contracted shape from bottom to top is a preferred option in the internal courtyard configuration. This study should, therefore, be of value in designing practical projects with an interior courtyard for architects.
Porous alumina was prepared via a sacrificial template method using alumina as the matrix and starch and carbon fibers as the pore-forming agents. After sintering, no residual pore-forming agents were present. The density, porosity, and pore structure of the samples were measured using the Archimedes’ method and mercury intrusion porosimetry (MIP). The results showed that the pore size distribution of porous alumina was double-peak when the content of the pore-forming agent was 20, 30, or 50 vol.%, but was single-peak when the content was 40 vol.%. A fractal model based on the measured MIP data was used to calculate and evaluate the fractal dimension (Ds) of porous alumina. The Ds values decreased with an increase in the pore-forming agent content. Furthermore, Ds was negatively correlated with porosity, most probable pore size, and median pore diameter and positively correlated with the bending strength of porous alumina. Since porous alumina has obvious fractal characteristics, the fractal theory can be used to quantitatively describe its complex distribution.
Rugged terrain dominates the Qinghai–Tibet Plateau, where complex landforms profoundly modulate solar energy availability. The reasonable distribution and development of solar energy resources in this region should be based on the accurate assessment of the effects of complex topography. This study proposes a high-resolution methodological framework to quantify the topographic–climatic interactions within Lhasa. Based on GIS technology (ArcGIS 10.8), this study employs a topographic decomposition method to extract micro-topographic variables, which are integrated into a distributed solar radiation model with 30 m resolution to simulate spatial–temporal radiation dynamics. Furthermore, we utilize the geographical detector (GD) model to attribute the spatial variance of radiation to specific topographic and surface drivers. The results show that: (1) The seasonal distribution of solar radiation is highly heterogeneous, with the monthly average extraterrestrial solar radiation (ESR) peaking in July (1190 MJ/m2) and reaching its lowest in December (469 MJ/m2). (2) Factor detection using the GD model indicates that slope aspect (q = 0.49) and Sky View Factor (SVF, q = 0.38) are the primary individual drivers of direct solar radiation, followed by surface albedo (q = 0.26) and DEM (q = 0.12). (3) Interaction detection reveals strong non-linear synergies, where the combined interaction of aspect and SVF yields the highest explanatory power (q = 0.889), followed by slope and albedo (q = 0.732). The outcomes of this research provide both a theoretical foundation and high-resolution spatial datasets to support photovoltaic site selection, enhance passive solar building design, and advance refined sustainable energy planning in complex alpine terrains globally.