The increasing importance of urban underground space (UUS) for sustainable development has necessitated the construction of new tunnels (NTs) near existing ones, posing significant geotechnical challenges. This study investigates the effects of constructing a new two‐lane tunnel (8 m diameter) adjacent to an existing smaller tunnel (5 m diameter) under a vertical overburden of 18 m in soft soil conditions. Initially, a scaled physical model was developed in the laboratory to observe surface settlement and tunnel deformations. These observations were validated using two‐dimensional (2D) finite element analysis. Following validation, a full‐scale numerical model was created to study the effects of varying tunnel spacing (defined as multiples of D , the diameter of the NT) under different conditions, including dry soil, saturated soil, and seismic loading. The full‐scale model results reveal that reducing the spacing between the tunnels from 2.5 D (20 m) to 1.0 D (8 m) significantly increases surface settlement from 34 to 60 mm. The horizontal displacement of the existing tunnel (ET) due to ovaling deformation reached 38.8 mm. Saturation of the surrounding soil caused a 19.8% reduction in effective stress, further amplifying tunnel deformation. Seismic loading simulated using the Koyna earthquake accelerogram led to a 140% increase in surface settlement, reaching a maximum of 56 mm. This study highlights the critical challenges in designing and constructing NTs near existing ones. Reducing tunnel spacing below 1.5 D (from this study) poses significant risks, including excessive deformation and settlement, requiring advanced stabilization measures. Additionally, the presence of a high groundwater table or seismic activity further exacerbates these effects, emphasizing the need for careful geotechnical planning and robust design methodologies to ensure the safety and longevity of underground infrastructure.
16 December 2022 in JOURNAL OF CIVIL ENGINEERING AND MANAGEMENT
The current research focuses on nanoparticles’ ground-improvement potential using clayey soil mixed with varying amounts of the nanoparticles “Silicon Carbide”. With an increase in the amount of nanomaterial, a tendency of improvement has been recorded in liquid and plastic limits, as well as the plasticity index. The maximum reduction in liquid limit (15.8%), plastic limit (13.6%), and plastic index (18.7%) was recorded at 0.25 gm of Silicon Carbide as compared to control (0 gm of SiC). There was a 26.7% and 33.3% increase in the cohesion of soil at 0.25 gm and 0.3 gm of Silicon Carbide, respectively. Furthermore, when the Silicon Carbide content increased from 0.25 gm, the rate of increment of friction angle also increased. It was 87.5% and 137.5% at 0.25 gm and 0.3 gm of Silicon Carbide, respectively. Furthermore, 0.3 gm of Silicon Carbide, is found to be optimal within the scope of the experiment as at this amount of Silicon Carbide both cohesion and angle of friction attained maximum. XRD, SEM, and FTIR were used to confirm the findings. It concludes that by using even a small amount of nanomaterial, an appreciable change in the properties of clayey soil can be obtained in the field. First published online 16 December 2022 Keyword : nano-material, clayey soil, Silicon Carbide, index properties, cohesion, angle of friction
Engineering rock mass classifications are vital for empirical approach to evaluate and predict engineering behavior of a rock mass. Now well established empirical relations between behavior of the rock mass and the rock mass properties with regard to specific engineering applications have become an important tool for resolving many geo-engineering issues related to mega engineering projects. Engineering classifications of Rock Masses have been applied in tunneling and underground mining with great success for many years. Some rock mass classification systems developed originally for underground, excavations were also modified and adopted for many different applications including slope stability applications. The rocky slopes in general as well as along road and rail tracks are important locales for slope analysis and stabilization. In this study five classification systems are thoroughly studied for rock stability assessment and compared on the basis of reports of various research paper published so far. The methods are Slope Mass Rating and it’s off shoots, such as Continuous Slope Mass Rating, Chinese Slope Mass Rating, Graphical Slope Mass Rating and Landslide Hazard Evaluation Factor. We have tried to work which of these method can best predict slope failure as a normal process of mass wasting and mass movement as well as triggering mechanism such as pore water pressure increase, sudden down pour, earthquakes etc. So as to work out structurally controlled failure mechanism to find suitable ways for safe rock slope cuts for road networks in hilly and mountains terrain.
This study investigates the dynamic response of cut‐and‐cover tunnels embedded in soil subjected to missile‐induced blasts at varying detonation points. Finite element simulations were performed using the concrete damage plasticity (CDP) model for concrete (M30 and M50) and steel–fiber‐reinforced concrete (SFRC), the Drucker–Prager model for soil, and the Johnson–Cook (J–C) model for reinforcement steel, aluminum 2024‐T3, and mild steel. Numerical results reveal that direct detonation at the tunnel surface leads to a 22.6% increase in stress and a 68.0% increase in displacement compared to detonation at the soil surface. To investigate potential mitigation measures, two strategies were evaluated: (1) replacing normal‐strength concrete tunnel liners with high‐strength concrete (M50) and SFRC and (2) incorporating a 3 mm thin sheet of energy‐absorbing materials such as aluminum 2024‐T3 and mild steel above the tunnel liner. The results indicate that replacing M30 concrete with M50 concrete reduces stress by 7.1%, while SFRC further decreases stress by 23.4% when detonation occurs directly at the tunnel liner. The inclusion of an aluminum 2024‐T3 and mild steel sheet leads to 34.1% and 48.3% reductions in displacement, respectively. Additionally, tensile damage was significantly reduced, with SFRC exhibiting the lowest level of tensile damage, while mild steel achieved the greatest stress reduction, decreasing stress by 55.1% compared with the unprotected tunnel liner. The findings provide engineering insights into the vulnerability of cut‐and‐cover tunnels subjected to missile‐induced blast loading and demonstrate the relative effectiveness of different mitigation strategies. These results may support future development of protective measures and more resilient underground infrastructure subjected to extreme loading conditions.