This work presents a high-common-mode-rejection-ratio (CMRR) and high-gain FinFET-based bio-potential amplifier with a novel CMRR reduction technique. In this paper, a feedback buffer is used alongside a capacitively coupled chopper-stabilized circuit to reduce the common-mode signal gain, thus boosting the overall CMRR of the circuit. The conventional pseudoresistor in the feedback circuit is replaced with a tunable parallel-cell configuration of pseudoresistors to achieve high linearity. A chopper spike filter is used to mitigate spikes generated by switching activity. The mid-band gain of the chopper-stabilized amplifier is 42.6 dB, with a bandwidth in the range of 6.96 Hz to 621 Hz. The noise efficiency factor (NEF) of the chopper-stabilized amplifier is 6.1, and its power dissipation is 0.92 µW. The linearity of the parallel pseudoresistor cell is tested for different tuning voltages (Vtune) and various numbers of parallel pseudoresistor cells. The simulation results also demonstrate the pseudoresistor cell performance for different process corners and temperature changes. The low cut-off frequency is adjusted by varying the parameters of the parallel pseudoresistor cell. The CMRR of the chopper-stabilized amplifier, with and without the feedback buffer, is 106.9 dB and 100.3 dB, respectively. The feedback buffer also reduces the low cut-off frequency, demonstrating its multi-utility. The proposed circuit is compatible with bio-signal acquisition and processing. Additionally, a machine learning-based arrhythmia diagnosis model is presented using a convolutional neural network (CNN) + Long Short-Term Memory (LSTM) algorithm. For arrhythmia diagnosis using the CNN+LSTM algorithm, an accuracy of 99.12% and a mean square error (MSE) of 0.0273 were achieved.
In this work, inverter based operational trans-conductance amplifier (OTA) is designed using different configurations of FinFET and CNTFET. Performance parameters (gain, power, bandwidth, and output resistance) of the OTA have been analyzed with variation of CNT parameters. In addition, inverter based OTA is used as a core amplifier in chopper stabilized amplifier. Three different novel configurations of tunable pseudoresistor are used as feedback resistor in chopper stabilized amplifier and their impact on OTA design has been observed. Also, a machine learning based model is designed for arrhythmia diagnosis. The performance of the designed model is evaluated using training accuracy and training loss for various algorithms. Confusion matrix is also used to show the performance of various algorithms.
In this study, an inverter‐based operational transconductance amplifier (OTA) is designed using various configurations of FinFET and CNTFET technologies. The performance parameters of the OTA, including gain, power consumption, bandwidth, and output resistance, are analysed with variations in CNT parameters. Furthermore, the inverter‐based OTA is utilised as the core amplifier in a chopper‐stabilised amplifier. Three novel configurations of tunable pseudoresistors are employed as feedback resistors in the chopper‐stabilized amplifier, and their impact on OTA performance is evaluated. Additionally, a machine learning‐based model for arrhythmia diagnosis is developed. Algorithms such as ANN+LSTM, CNN+LSTM, and RNN+LSTM are implemented, and their performance is assessed based on training accuracy, training loss, and a confusion matrix to highlight their effectiveness. Training accuracy for ANN+LSTM, CNN+LSTM and RNN+LSTM is found to be 96.56%, 99.12%, and 94.56%, respectively.