Takahiro Kunimine

Takahiro Kunimine


Research Focus & Metrics

Academic Career Length

18Years (2009-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 November 2021 in Communications Materials
Verified
Journal Article
Open access
PDF file
YMYasuhiro Miyazawa
Yasuhiro Miyazawa
HYHiromi Yasuda
Hiromi Yasuda
HKHyungkyu Kim
Hyungkyu Kim
JLJames H. Lynch
James H. Lynch
KTKosei Tsujikawa
Kosei Tsujikawa
JYJinkyu Yang
Jinkyu Yang
Origami, the ancient art of paper folding, has shown its potential as a versatile platform to design various reconfigurable structures. The designs of most origami-inspired architected materials rely on a periodic arrangement of identical unit cells repeated throughout the whole system. It is challenging to alter the arrangement once the design is fixed, which may limit the reconfigurable nature of origami-based structures. Inspired by phase transformations in natural materials, here we study origami tessellations that can transform between homogeneous configurations and highly heterogeneous configurations composed of different phases of origami unit cells. We find that extremely localized and reprogrammable heterogeneity can be achieved in our origami tessellation, which enables the control of mechanical stiffness and in-situ tunable locking behavior. To analyze this high reconfigurability and variable stiffness systematically, we employ Shannon information entropy. Our design and analysis strategy can pave the way for designing new types of transformable mechanical devices.

1 January 2009 in MATERIALS TRANSACTIONS
Verified
Journal Article
Closed access
TKTakahiro Kunimine
Takahiro Kunimine
Naoki TakataNaoki Takata
Naoki Takata
Nobuhiro TsujiNobuhiro Tsuji
Nobuhiro Tsuji
TFToshiyuki Fujii
Toshiyuki Fujii
MKMasaharu Kato
Masaharu Kato
SOSusumu Onaka
Susumu Onaka
Tensile tests and strain rate jump tests have been carried out at low temperatures (77K room temperature (RT)) using pure Cu specimens that were severely deformed by accumulative roll bonding (ARB). The dependence of the flow stress on the temperature and the strain rate has been investigated and the strain rate sensitivity m and its variation caused by the change in the ARB cycle N are discussed. At RT, the strain rate sensitivity for N 4 stays at about 0.005. However, for N 5, m increases with increasing N to become 0:018 when N 8. The deformation mechanisms of the ARB processed Cu are discussed with the activation volume V. The temperature dependence of V and its variation with increasing N are also discussed. [doi:10.2320/matertrans.MD200809

2 June 2020 in Scientific Reports
Verified
Journal Article
Open access
PDF file
TKTakahiro Kunimine
Takahiro Kunimine
RMRyusei Miyazaki
Ryusei Miyazaki
YYYorihiro Yamashita
Yorihiro Yamashita
YFYoshinori Funada
Yoshinori Funada
Establishing processing routes for obtaining metal-matrix composites (MMCs) with uniformly-dispersed reinforcements is one of the main subjects in additively manufactured composite materials to achieve designed microstructures and mechanical properties. Here we report on the microstructural features of compositionally graded WC/Co-alloy composites additively manufactured by multi-beam laser directed energy deposition (multi-beam LDED). For tailoring microstructures of compositionally graded WC/Co-alloy composites with uniformly-dispersed reinforcements, the combinational method: the laser-beam defocus function in the multi-beam LDED system and granulated powder was attempted. By laser defocusing in the multi-beam LDED system, composites with uniformly-dispersed WC particles in Co alloy matrix was successfully obtained due to melting of Co bond in WC-12 wt.%Co granulated particles. It was found that the laser defocusing of multi-beam lasers affects temperature increase of flying powder during the laser focusing area, resulting in change of processing mode from melt-pool mode to thermal spray mode. The preferable property gradients in the WC/Co-alloy composites could be obtained by controlling the feeding rate of the powders and laser-beam defocus. These experimental results demonstrated the effectiveness of the laser-beam-defocus function in the multi-beam LDED system as a key factor for tailoring microstructures of additively-manufactured functionally graded MMCs with uniformly-dispersed reinforcements.

1 March 2015 in Journal of Materials Processing Technology
Verified
Journal Article
Closed access
TKTakahiro Kunimine
Takahiro Kunimine
MSMasafumi Shibuya
Masafumi Shibuya
HSHisashi Sato
Hisashi Sato
YWYoshimi Watanabe
Yoshimi Watanabe

1 July 2018 in Materials Science and Engineering: A
Verified
Journal Article
Closed access
HWHikaru Watanabe
Hikaru Watanabe
TKTakahiro Kunimine
Takahiro Kunimine
CWChihiro Watanabe
Chihiro Watanabe
RMRyoichi Monzen
Ryoichi Monzen
Yoshikazu TodakaYoshikazu Todaka
Yoshikazu Todaka

1 August 2019 in MATERIALS TRANSACTIONS
Verified
Journal Article
Open access
PDF file
TKTakahiro Kunimine
Takahiro Kunimine
MWMinami Watanabe
Minami Watanabe
Although the maximal strength of Cu with a mean grain size of 10 nm has been reported as ∼1000 MPa, the maximal strength of nanostructured Cu processed by severe plastic deformation (SPD) is ∼450 MPa, owing to the saturation of accumulated strain caused by recovery or recrystallization during the SPD process. The strength of SPD-processed Cu can be increased by adding solid-solution atoms. A significant increase in the strength of nanostructured Cu after adding a small amount of Si solute atoms was reported in our previous study. In this study, various-composition Cu–Zn, Cu–Si, and Cu–Ni solid-solution alloys were subjected to high-pressure torsion (HPT) processing, which is one of the SPD processes. To reveal the role of solid-solution atoms on the deformation of Cu during the SPD process, the effects of Zn, Si, and Ni additions on hardness and microstructure of Cu after various HPT rotations were systematically investigated, up to the solubility limits of these atoms. It is well known that Zn and Si atoms decrease the stacking fault energy (SFE) of Cu. On the other hand, Ni atoms have the opposite effect to that of Zn and Si on the SFE of Cu. Experimental results were considered in terms of the atomic concentration of solute atoms ca, electron-atom ratio e/a, and the SFE. The hardness of 140 HV of the nanostructured Cu significantly increased with increasing addition of Zn, Si, and Ni. The maximal hardness values of the nanostructured Cu–Zn, Cu–Si, and Cu–Ni alloys were 250 HV (29.4 at%Zn), 275 HV (4.5 at%Si), and 360 HV (81.4 at%Ni), respectively. In the case of the nanostructured Cu–Zn and Cu–Si alloys, the hardness increase correlated with the reduction in the SFE as a function of e/a. The decreased SFE by Zn and Si additions increased strain hardening during the SPD process. This strengthened the nanostructured Cu–Zn and Cu–Si alloys. On the other hand, hardening of the nanostructured Cu–Ni alloys is related not to the SFE changes, but to dislocation pinning or dragging by Ni solute atoms followed by suppression of recovery or recrystallization during the SPD process. This Paper was Originally Published in Japanese in J. Japan Inst. Copper 57 (2018) 286–290.