We performed an experimental study of the elastic properties of the aorta by several independent methods, including the elastometry of the porcine aorta in different stretching modes,...
This paper proposes a new approach to the quantitative analysis of the hydrodynamic structure of a blood flow in the flow channel running from the left atrium to the end of the aorta. This approach is based on the concept of the structural organization of tornado-like swirling jets in channels with a given geometric configuration. Considering the large amount of experimental data in our possession, it was shown that along the entire length of the flow channel, conditions exist for the generation and maintenance of a swirling structure of the jet throughout the entire cardiac cycle. This study has given rise to a new direction in research in fundamental physiology and medicine, which is of great practical importance for diagnosing and treating circulatory disorders accompanied by changes in the geometric configuration and biomechanical characteristics of the heart and great vessels.
5 March 2018 in Bulletin of Experimental Biology and Medicine
Study of swirling flows in channels corresponding to the static approximation of flow channels of the heart and major vessels with a longitudinal–radial profile zR2 = const and a concave streamlined surface at the beginning of the longitudinal coordinate has been carried out. A comparative analysis of the flow structure in channel configurations zRN = const, where N = –1, 1, 2, 3, in the absence and presence of a concave surface was carried out. The numerical modeling was compared with the results of hydrodynamic experiments on the flow characteristics and the shape of the flow lines. The numerical model was used to determine the velocity structure, viscous friction losses, and shear stresses. Numerical modeling of steady-state flows for channels without a concave surface showed that in the channel zR2 = const there is a stable vortex flow structure with the lowest viscous friction losses. The presence of a concave surface of sufficient size significantly reduces viscous friction losses and shear stresses in both the steady state and pulsed modes.
—To substantiate a common mechanism for the flow around the flow channel of the heart left ventricle regardless of the species, the orientation of trabeculae in the left ventricular cavity was anatomically studied in humans and model animals of different sizes, including rats, rabbits, and dogs. Left ventricular cavity casts were used to measure the parameters of the intracardiac trabecular meshwork in humans and animals. Casts of approximately the same size were used in each species to improve the reliability of measurements. Exact solutions of nonstationary hydrodynamics equations for the class of tornado-like swirling flows of viscous fluids were used as a hydrodynamic model to estimate the parameters of the intracardiac blood flow. The degree of twisting was plotted as dependent on the volumetric index of the intracardiac tornado-like jet; the resulting plots showed the continuity of the hyperbolic function for all casts with a high data fitting accuracy (R2 varied from 0.7963 to 0.9081). All points of the dependences therefore corresponded to the convergence condition \({{Z}_{i}}R_{i}^{2}\) = const and might belong to a singular swirling jet and form its boundary layer. Plots of the volumetric change of the jet vs. the longitudinal coordinate were obtained at different angles of cast fixation and were linear in all cases. Given the high fitting accuracy of the data (R2 varied from 0.7882 to 0.8853), the pattern of swirling and the accumulation of the energy of a moving dominant flow were assumed to be similar in humans and animals. The results thus demonstrated that the orientation and coordinated contractions of the trabecular meshwork play a crucial role in the formation of a swirling intracardiac blood flow and agree with general mechanisms of adequate blood flow in humans and animals regardless of the size of the flow channel of the heart.