Numerical simulation of fluid flow and heat or mass transfer phenomenon requires numerical solution of Navier–Stokes and energy-conservation equations, together with the continuity equation. The basic problem of solving general transport equations by the Finite Volume Method (FVM) is the exact calculation of the transport quantity. Numerical or false diffusion is a phenomenon of inserting errors in calculations that threaten the accuracy of the computational solution. The paper compares the physical accuracy of the calculation in the Computational Fluid Dynamics (CFD) code in Ansys Fluent using the offered discretization calculation schemes, methods of solving the gradients of the transport quantity on the cell walls, and the influence of the mesh type. The paper offers possibilities on how to reduce numerical errors. In the calculation area, the sharp boundary of two areas with different temperatures is created in the flow direction. The three-dimensional (3D) stationary flow of the fictitious gas is simulated using FVM so that only advective transfer, in terms of momentum and heat, arises. The subject of the study is to determine the level of numerical diffusion (temperature field scattering) and to evaluate the values of the transport quantity (temperature), which are outside the range of specified boundary conditions at variously set calculation parameters.

Modeling the wind flow around cylindrical buildings is one of the problems within urban physics. Despite the simple geometry of the cylinder, it is an interesting physical phenomenon. Partial knowledge of flow field properties can be found in the literature, but in terms of their use for practical tasks, the data are still incomplete. The authors performed a numerical analysis of the flow around the smooth cylinder in the subcritical and critical regime for Reynolds numbers in the range of Re = 2.3 × 10³ to 4 × 10⁵. Turbulent flow was solved using LES model and the numerical solution was compared with available data from experiments or standard. Analysis of the mean stream velocity showed the elongation of the core of the wake with decreasing Re. The pressure coefficient evaluation showed a big difference between its distribution in the subcritical and critical regime. In the subcritical regime, a significant increase in the minimum value and a shift of the extreme close to the axis of the cylinder is proven. The results of the drag coefficient confirm a significant decrease in the transition from subcritical to critical regime, which is indicated in the cited experiments.

The paper focuses on the verification of the suitability of the SST k - ω model on the flow past a circular cylinder in 2D for a high Reynolds number. The study compares the results of drag and lifts coefficients with respect to different types of meshes and time steps. The mean velocity field in the wake region behind the cylinder is evaluated and compared to experimental data available from literature. The numerical simulations are solved using CFD codes in the ANSYS Fluent software and use the finite volume method.

Flow characteristics contraction of rectangular cross-section are investigated numerically and experimentally so as to gain an additional insight into the contraction design. They observed velocity field and turbulent intensity in the area of contraction and downstream of it. Individual numerical models sofware Ansys Fluent are evaluated and compared with measurements in a wind tunnel.