The primary focus of this paper is to discuss the modeling of jitter caused by power supply noise, named as power supply induced jitter (PSIJ). A holistic discussion is presented from the basics of power delivery networks to power supply noise and eventually to the modeling of power supply induced jitter. The in-depth details and a review of several methodologies available in the literature for estimation of PSIJ are presented.
19 November 2018 in IEEE Transactions on Electromagnetic Compatibility
This paper presents an efficient method to estimate jitter in a chain of CMOS inverters in the presence of multiple noise sources, including the power supply noise, input data noise, and the ground bounce noise. For this purpose, necessary noise transfer functions are derived and the recently developed EMPSIJ method [J. N. Tripathi, R. Achar, and R. Malik, “Efficient modeling of power supply induced jitter in voltage-mode drivers (EMPSIJ),” IEEE Trans. Compon., Packag.Manuf. Technol., vol. 7, no. 10, pp. 1691–1701, Oct. 2017.] is advanced to handle cascaded CMOS inverter stages. Results from the proposed method are compared with the results from a conventional EDA simulator, which demonstrate a significant speed-up using the proposed method for a comparable accuracy.
31 May 2021 in IEEE Transactions on Electron Devices
This article presents an analytical approach to determine jitter for a CMOS inverter in the presence of power supply noise (PSN). The deviation in the transition edge of the output signal from its ideal timing is modeled accurately for each transition. A power series method is used to solve differential equations for different regions of transistors during output transition. The PSN has been expressed in Taylor series expression, aids to derive closed-form equation for time interval error (TIE). The obtained results from the proposed methodology closely match with electronic design automation (EDA) simulator results and verified on 40 nm Taiwan Semiconductor Manufacturing Company (TSMC) and 28 nm United Microelectronics Corporation (UMC) foundries, demonstrating accurate modeling of jitter.
7 December 2021 in IEEE Open Journal of Nanotechnology
In the era of advanced nanotechnology where billions of transistors are fabricated in a single chip, high-speed operations are challenging due to packaging related issues. In High-Speed Very Large Scale Integration (VLSI) systems, decoupling capacitors are essentially used in power delivery networks to reduce power supply noise and to maintain a low impedance of the power delivery networks. In this paper, the cumulative impedance of a power delivery network is reduced below the target impedance by using state-of-the-art metaheuristic algorithms to choose and place decoupling capacitors optimally. A Matrix-based Evolutionary Computing (MEC) approach is used for efficient usage of metaheuristic algorithms. Two case studies are presented on a practical system to demonstrate the proposed approach. A comparative analysis of the performance of state-of-the-art metaheuristics is presented with the insights of practical implementation. The consistency of results in both the case studies confirms the validity of the proposed appraoch.
27 October 2017 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
An efficient approach for modeling of time interval error (TIE) due to noise in power delivery networks (PDNs), for current-mode (CM) driver circuits, is presented. Semianalytical expressions relating the PDN noise and TIE are developed based on midpoint delays of the rising and falling edges of the differential signal. The validating examples with CM driver circuits designed in various technologies comparing both the proposed and conventional approaches demonstrate a significant speedup using the proposed approach.
26 October 2017 in IEEE Microwave and Wireless Components Letters
This letter presents an efficient and generic methodology for the estimation of power supply-induced jitter by the numerical method using a root-finding approach. The methodology is described in detail through an example of a voltage-mode driver circuit. There is a significant speed-up reported compared with the simulations by a commercial simulator.