Pneumatic soft grippers have been widely studied. However, the structures and material properties of existing pneumatic soft grippers limit their load capacity and manipulation range. In this article, inspired by sea lampreys, we present a pneumatic novel combined soft gripper to achieve a high load capacity and a large grasping range. This soft gripper consists of a cylindrical soft actuator and a detachable sucker. Three internal air chambers of the cylindrical soft actuator are inflated, which enables them to hold objects. Under vacuum pressure, the cylindrical soft actuator and the detachable sucker can both adsorb objects. A finite element model was constructed to simulate three inflation chambers for predicting the grasping range of the cylindrical soft actuator. The validity of the finite element model was established by an experiment. The mechanism of holding force and adsorption force were analyzed. Several groups of experiments were conducted to determine adsorption range, holding force, and adsorption force. In addition, practical applications further indicated that the novel combined soft gripper has a high load capacity (10.85 kg) at a low pressure (16 kPa) and a large grasping range (minimum diameter of the object: d = 6 mm), being able to lift a variety of objects with different weights, material properties, and shapes.

Biologically inspired pneumatic ring-shaped soft grippers have been extensively studied in the field of soft robotics. However, the effect of the number of air chambers on the grasping performance (grasping range and load capacity) of ring-shaped soft grippers has not been studied. In this article, we propose three ring-shaped soft grippers with the same area of inner walls of air chambers and different numbers of air chambers (two-chamber, three-chamber, and four-chamber) for analyzing and comparing their grasping performance. Finite element method (FEM) models and experimental measurements are conducted to compare the deformation of the inner walls of the three ring-shaped soft grippers, the results indicate that the grasping range of the three-chamber ring-shaped soft gripper is larger than that of the two-chamber ring-shaped soft gripper and the four-chamber ring-shaped soft gripper. Then we choose the three-chamber ring-shaped soft gripper to study the relationship between contact force and air pressure by FEM models and experimental measurements. Several groups of experiments are constructed to compare the load capacity of the three ring-shaped soft grippers, the results indicate that the load capacity of the three-chamber ring-shaped soft gripper is higher than that of the two-chamber ring-shaped soft gripper and the four-chamber ring-shaped soft gripper. The above results reveal that the grasping performance of the three-chamber ring-shaped soft gripper is better than that of other two ring-shaped soft grippers. Furthermore, the application experiments indicate that the three ring-shaped soft grippers can grasp various objects with different weights, material properties, and shapes. This study provides a new idea for investigating ring-shaped soft grippers.

Inspired by the fact that flying insects improve their power conversion efficiency through resonance, many soft robots driven by dielectric elastomer actuators (DEAs) have achieved optimal performance via first-order modal resonance. Besides first-order resonance, DEAs contribute to multiple innovative functions such as pumps that can make sounds when using multimodal resonances. This study presents the multimodal resonance of a rectangular planar DEA (RPDEA) with a central mass bias. Using a combination of experiments and finite element modeling (FEM), it was discerned that under a prestretch of 1.0 × 1.1, the first-, second-, and third-order resonances corresponded to vertical vibration, rotation along the long axis, and rotation along the short axis, respectively. In first-order resonance, superharmonic, harmonic, and subharmonic responses were activated, while only harmonic and subharmonic responses were observed in the second- and third-order resonances. Further investigations revealed that prestretching tended to inhibit third-order resonance but could elevate the resonance frequencies of the first and second orders. Conveniently, both the experimental and FEM results showed that the frequencies and amplitudes of the multimodal resonances could be tuned by adjusting the amplitudes of the excitation signals, referring to the direct current (DC) amplitude and alternating current (AC) amplitude, respectively. Moreover, instead of linear vibration, we found another novel approach that used rotation vibration to drive a robot with soft bristles via hopping locomotion, showcasing a higher speed compared to the first-order resonance in our robot.