Michał Abramowski

Dr. Michał Abramowski

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 April 2018
Verified
Conference Paper
Closed access
MAMichał Abramowski
Michał Abramowski
The article presents the theoretical assumptions of the analysis of images recorded by the video recorder in an accident. Several methods described in this article demonstrate the use of video recordings by the DVR (data video recorder - as well as surveillance traffic cameras) which are further analyzed and determine a lot of valuable information to facilitate the reconstruction of road accidents. Calculation of speed, velocity and energy presented in this paper are based on the data obtained from the optical system video recorder and factors such as recording speed film sequences, geometrical size of characteristic point and geometrical size and position of characteristic point of the area. It has been proposed as a way of calculation that takes into account these values. There were also presented the examples of three cases from research confirming the correctness of assumptions. The idea is to build a tool to support an expert in accident reconstruction, to be used in the reconstruction of recordings from recording devices.

22 November 2024 in Sensors
Verified
Journal Article
Open access
PDF file
ARAndrzej Reński
Andrzej Reński
MBMateusz Brukalski
Mateusz Brukalski
HSHubert Sar
Hubert Sar
MAMichał Abramowski
Michał Abramowski
Piotr FundowiczPiotr Fundowicz
Piotr Fundowicz
KRKrzysztof Rokicki
Krzysztof Rokicki
The motion of automobiles significantly depends on the conditions of interaction between a tyre and a road surface. One of the most frequently used ways of presenting the conditions of cooperation between a tyre and a road surface is a characteristic showing a longitudinal adhesion coefficient as a function of a longitudinal slip of a tyre. One of the methods for determining tyre-to-road adhesion characteristics is to use a special trailer combined with a towing vehicle. This type of method is commonly used to determine adhesion characteristics for a braked wheel. This article presents a method for determining adhesion characteristics for a driven wheel based on the road tests of automobiles. For this purpose, vehicle wheel velocity signals from a vehicle CAN network and a vehicle velocity signal from a GPS receiver were used. The signals from the CAN network were recorded using a special measurement card and an application developed in LabVIEW environment. The application developed in LabVIEW also allowed for simultaneous recording of automobile velocity from the GPS receiver. In this paper, the courses of a wheel velocity, longitudinal acceleration of automobile, longitudinal slip of the front wheels in time domain, as well as the coefficient of tyre-to-road longitudinal adhesion as a function of the longitudinal slip of the wheel are presented.

22 January 2025 in Sensors
Verified
Journal Article
Open access
PDF file
MAMichał Abramowski
Michał Abramowski
Piotr FundowiczPiotr Fundowicz
Piotr Fundowicz
HSHubert Sar
Hubert Sar
ARAndrzej Reński
Andrzej Reński
MBMateusz Brukalski
Mateusz Brukalski
As part of improving road safety around trucks, a solution was proposed to reduce the swept path width of a moving tractor–semi-trailer. This article presents a mathematical analysis of the movement of a tractor unit with a traditional semi-trailer with fixed axles and steered wheels. A simulation analysis of both presented vehicles was carried out. The core of the algorithm controlling the steering angle of the semi-trailer wheels is presented. The influence of controlling the semi-trailer’s swivel wheels on the swept path width of a tractor–trailer with a semi-trailer equipped with swivel wheels is discussed. The assumptions for building the control algorithm are presented. The article presents the advantages of the solution used along with the control algorithm. Measurable benefits resulting from the use of the presented solution are presented, such as increasing cargo space, reducing cargo transport costs, and reducing aerodynamic resistance and fuel consumption. It is worth emphasizing that reducing fuel consumption is very important because it reduces the emission of harmful exhaust gases into the atmosphere. The swept path width is important especially in the case of vehicles moving in a limited area, for example in the parking lots of transhipment and logistics centers, between urban buildings. Vehicles admitted to traffic meet the minimum conditions imposed by homologation regulations, but reducing the swept path width allows for improving the operational properties of the tractor–semi-trailer. The use of the proposed control algorithm to control the turn of the semi-trailer’s steered wheels brings tangible benefits both in improving road safety and in reducing the emission of harmful substances into the environment.

13 March 2024 in Archives of Transport
Verified
Journal Article
Open access
PDF file
MAMichał Abramowski
Michał Abramowski
ARAndrzej Reński
Andrzej Reński
Selected methods of quantitative analysis of video recordings are presented, which can be used to analyse images from both fixed cameras (highways, intersections, etc.) and vehicle-mounted cameras. The article deals with the use of video recordings in the reconstruction of road traffic accidents. Many drivers use digital video recorders (DVRs), the so-called dashboard cameras, which record the situation in front of or behind the car while driving. There are also many places where cameras are installed, such as highways, intersections, etc. In some situations, such recordings can be important evidence in establishing liability for a road traffic accident. However, in most of these cases, the video recording is only analysed qualitatively, while the article shows that a lot of quantitative information can also be obtained from the video recording, such as speeds, accelerations and directions of movement of the vehicles. Analysing the image of the camera moving with the vehicle is more difficult, but possible thanks to the analysis methods presented in the article. The reconstruction of a road traffic accident event using the presented methods can be carried out on the basis of recordings made with the help of recording devices that capture images of different quality. It is not necessary to know the parameters of the camera recording the image. However, knowing these parameters makes the analysis much easier. In addition, reference was made to the problems of image analysis that experts have to deal with when reconstructing accidents. It was pointed out that video recordings should be analysed using different methods depending on the situation they represent. The influence of the quality of the recording (resolution, distortion, image sharpness, recording speed, etc.) on the usefulness of the recording for obtaining quantitative information is also discussed. Finally, a method for estimating the uncertainty of the results is presented. The article confirms that it is possible to determine selected parameters of vehicle movement based on the analysis of the DVR recorder.

21 December 2021 in Preprints.org
Verified
Preprint
Open access
GDGrzegorz Dobrzynski
Grzegorz Dobrzynski
MAMichał Abramowski
Michał Abramowski
The article presents the stages of modeling and simulation of a new design of a wheelchair with the option of moving up and down stairs. These analyzes were aimed at the synthesis of the de-sign parameters and parameters of the sensor and control systems. The simulation results were verified by experimentally testing the prototype.