The sine waveguide (SWG) is presented as a potential slow-wave structure (SWS) for the millimeter wave (mm-wave) and terahertz traveling-wave tube (TWT) because of the advantages of wide bandwidth, natural electron beam tunnel and easy fabrication. In particular, this theoretical study indicates that the transmission loss of the SWG is far less than that of the folded waveguide SWS, which is widely employed in the mm-wave and terahertz TWT. Here, the flat-roofed SWG slow-wave circuit working in the W-band has been machined using nano-computer numerical control technology, which guarantees micron tolerances and surface roughness of tens of nanometers using carbide tooling with 100 μ m diameter. The cold test results show that the transmission coefficient S21 of the entire high frequency slow-wave circuit is more than -4.1 dB with a total length of 123.84 mm in the frequency range from 90 GHz to 100 GHz, and the transmission loss is less than 0.36 dB/cm.
5 April 2021 in IEEE Transactions on Electron Devices
In this article, a 1-THz traveling-wave tube (TWT) based on flat-roofed sine waveguide (SWG) slow wave structure (SWS) has been studied theoretically and experimentally, and parts of the component have been fabricated. First, the flat-roofed SWG SWS has been optimized for working at 1 THz, the normalized phase velocity is around 0.287, and the interaction impedance is over 3.5 Ω in the frequency range of 1.02-1.04 THz. Meanwhile, the performance of the designed TWT has been simulated, whose saturated output power is 720 mW and the corresponding gain is 28.57 dB. What is more, to decrease the transmission loss of the high-frequency structure, the input and output structures have been designed and a transition structure that transforms the waveguide to standard rectangular waveguide has been proposed. The simulation results show that the reflection coefficient of the novel proposed transmission system is less than -20 dB, and the insertion losses of the transition structure with the input and output waveguides are 2.45 and 1.68 dB, respectively. Finally, the designed SWS has been fabricated by deep reactive-ion etching (DRIE) and tested; S 11 is generally less than -10 dB in the frequency range of 1020-1040 GHz.
21 November 2008 in IEEE Transactions on Electron Devices
A special type of helical slow-wave structure encompassing a rectangular geometry is investigated in this paper, and the slow-wave characteristics are studied taking into account the anisotropically conducting helix. By using the electromagnetic integral equations at the boundaries, the dispersion equation and the interaction impedance of transverse antisymmetric modes in this structure are derived. Moreover, the obtained complex dispersion equation is numerically calculated. The calculation results by our theory agree well with the results obtained by the 3-D EM simulation software HFSS. The numerical results reveal that the phase velocity decreases and interaction impedance increases at higher frequencies by flattening (increasing the aspect ratio of) the rectangular helix structure. In addition, a comparison of slow-wave characteristics of this structure with a conventional round helix is made.
1 April 2022 in IEEE Transactions on Electron Devices
This article reports a slow-wave structure (SWS) working at 1 THz which can be fabricated through nano-computer numerical control (nano-CNC) technology for the first time. First, a 1 THz deformed quasi sine waveguide (D-QSWG) SWS has been designed and simulated in this article. To reduce the metal loss of input and output waveguide, a coupler which transit the waveguide to over mode rectangular waveguide has been designed. The simulation result shows that input and output waveguides with this coupler have lower metal loss than that of WR1 rectangular waveguide. To fabricate the designed D-QSWG SWS, tungsten steel endmills have been used. The fabricated SWS has the surface roughness around 58–74 nm, the corresponding effective conductivity is around $2\times 10^{{7}}$ –1.85 $\times 10^{{7}}$ S/m. And the cold test results show that the insertion loss of the fabricated model is less than 30 dB while the reflection loss is less than −15 dB in the frequency range of 0.998–1.016 THz, which has a good consistency with the simulated results. The beam-wave interaction simulation results based on the cold test results show that the designed D-QSWG traveling wave tube (TWT) has the output power of 300 mW, and the 3 dB bandwidth is around 3 GHz.
17 May 2019 in IEEE Transactions on Plasma Science
This paper puts forward a novel dual-beam overmoded folded waveguide (FW) slow-wave structure (SWS), which is loaded with photonic crystals. In this novel structure, the two electron beams pass through the small gaps between the photonic crystal structures and the FW; the dimension of the FW is twice larger than that of the fundamental mode structure. The novel dual-beam photonic crystal overmoded FW traveling-wave tube (TWT) is proposed on the basis of the SWS. And, a mode converter is introduced to achieve the connection between the SWS and the input/output structure, and the mode transformation. At the operating voltage of 21.2 kV and the operating current of 320 mA, the proposed TWT can generate 128 W of output power at 220 GHz, and its 3-dB bandwidth is 7 GHz, ranging from 216 to 223 GHz.
24 October 2016 in IEEE Transactions on Plasma Science
A novel slow-wave structure (SWS), named ridge-loaded sine waveguide (RLSWG), has been proposed to develop the wideband high-power terahertz traveling-wave tube (TWT). The slow-wave characteristics of the RLSWG SWS, including dispersion properties and interaction impedance, are analyzed by using the 3-D electromagnetic simulation software Ansoft high frequency structure simulator (HFSS). From our calculation, the average interaction impedance of the RLSWG SWS at 0.22 THz is 42.2% higher than the conventional SWG SWS. Meanwhile, the simulation results demonstrate that the RLSWG SWS possesses low ohmic losses and reflection. Moreover, the particle-in-cell (PIC) simulation results reveal that, with the cylindrical electron beam of 20.9 kV and 45 mA, the output power and electron efficiency of the RLSWG TWT at the typical frequency of 0.22 THz can reach 52.1 W and 5.54%, respectively. In addition, the 3-dB bandwidth of the RLSWG TWT exceeds 25 GHz. Compared with the SWG TWT, the RLSWG TWT has the shorter tube length and can generate the larger output power.