This paper proposes a hierarchical image-based visual servoing (IBVS) strategy for dynamic positioning of a fully actuated underwater vehicle. In the kinematic loop, the desired velocity is generated by a nonlinear model predictive controller, which optimizes a cost function of the predicted image trajectories under the constraints of visibility and velocity. A velocity reference model, representing the desired closed-loop vehicle dynamics, is integrated with an IBVS kinematic model to predict the future trajectories. In the dynamic velocity tracking loop, a neural-network-based model reference adaptive controller is designed to ensure the convergence of the velocity tracking error in the presence of uncertainties associated with vehicle dynamic parameters, water velocity, and thrust forces. Comparative simulations with different control and system configurations are performed to verify the effectiveness of the proposed scheme and to illustrate the influences of the prediction horizon, cost function, closed-loop vehicle dynamics, and predictive velocity reference model on the IBVS system performance.

Energy efficiency and safety are two critical objectives for marine vehicles operating in environments with obstacles, and they generally conflict with each other. This paper proposes a novel online motion planning method for marine vehicles, which can take practical limitations into account and make trade-offs between the two objectives by exploiting the economic model predictive control (EMPC) technique. To achieve this, a trajectory generation method is first proposed, which provides the smooth reference evolved from the safest path and facilitates the measurement of safety degree. Then the EMPC-based motion planning framework, which accounts for system and environmental constraints, energy consumption, and safety margin, is proposed after the tailored energy cost function is designed. Furthermore, the receding horizon planning strategy for the developed planning framework is proposed, which explicitly addresses the non-negligible calculation time and the limited detection range. Finally, the effectiveness and feasibility of the proposed method are also validated through experiments.

Autonomous underwater vehicles (AUVs) are an important equipment for ocean investigation. Actuator fault diagnosis is essential to ensure the sailing safety of AUVs. However, the lack of failure data for training due to unknown ocean environments and unpredictable failure occurrences is challenging for fault diagnosis. In this paper, a meta-self-attention multi-scale convolution neural network (MSAMS–CNN) is proposed for the actuator fault diagnosis of AUVs. Specifically, a two-dimensional spectrogram of the vibration signals obtained by a vibration sensor is used as the neural network’s inputs. The diagnostic model is fitted by executing a subtask-based gradient optimization procedure to generate more general degradation knowledge. A self-attentive multi-scale feature extraction approach is used to utilize both global and local features for learning important parameters autonomously. In addition, a meta-learning method is utilized to train the diagnostic model without a large amount of labeled data, which enhances the generalization ability and allows for cross-task training. Experimental studies with real AUV data collected by vibration sensors are conducted to validate the effectiveness of the MSAMS–CNN. The results show that the proposed method can diagnose the rudder and thruster faults of AUVs in the cases of few-shot diagnosis.