16 April 2020 in IEEE Transactions on Industrial Electronics
The paper studies the trajectory tracking control problem of underactuated marine vehicles via the nonlinear model predictive control (NMPC) strategy, where practical control and state constraints present. It is a well-known challenging issue that the conventional NMPC is not applicable for underactuated marine vehicles, due to the fact that there does not exist a local static continuous state-feedback controller to stabilize the underactuated dynamics. To resolve this issue, this paper proposes to construct an auxiliary time-varying tracking controller to aid terminal constraint design in the NMPC framework, where the time-varying tracking controller borrows the ideas from Lyapunov's direct method and backstepping approach. Based on this, a novel NMPC algorithm is designed to ensure trajectory tracking control of underactuated marine vehicles. Furthermore, a systematic parameter design approach is developed. Under the designed parameters, we show that the tracking error system is input-to-state stable (ISS). Finally, the effectiveness of the designed algorithm is verified by thorough simulation and hardware experiments.
15 May 2019 in IEEE Transactions on Automatic Control
The event-triggered scheduling of network transmissions has found many applications in engineering tasks operated in cyber-physical systems for its competitive advantage of system resource exploitation. This work investigates the distributed gradient method for large-scale convex constrained problems with event-triggered consensus protocols. We show that the convergence can be ensured provided that the event-triggering threshold bound is square summable, and the stepsize satisfies specific conditions that are characterized by the Lipschitz constant of the gradient and the spectrum of the mixing matrix associated with the network topology. Stronger convergence results are derived for the strongly convex case, i.e., the local estimate of the minimizer linearly converges to the minimizer until reaching an error floor whose magnitude is shown to be proportional to the stepsize if the triggering threshold bound linearly converges. Comprehensive numerical experiments are conducted to verify the correctness of the theoretical results and advantages of the proposed algorithm over existing ones.
15 May 2023 in IEEE Transactions on Industrial Electronics
The unaffordable computation load of nonlinear model predictive control (NMPC) has prevented it from being used in robots with high sampling rates for decades. This article is concerned with the policy learning problem for nonlinear MPC with system constraints, where the nonlinear MPC policy is learned offline and deployed online to resolve the computational complexity issue. A deep neural networks (DNN)-based policy learning MPC (PL-MPC) method is proposed to avoid solving nonlinear optimal control problems online. The detailed policy learning method is developed and the PL-MPC algorithm is designed. The strategy to ensure the practical feasibility of policy implementation is proposed, and it is theoretically proved that the closed-loop system under the proposed method is asymptotically stable in probability. In addition, we apply the PL-MPC algorithm successfully to the motion control of unmanned surface vehicles (USVs). It is shown that the proposed algorithm can be implemented at a sampling rate up to 5 Hz with high-precision motion control.
1 May 2019 in IEEE Transactions on Automatic Control
This paper is concerned with the robust event-triggered model predictive control (MPC) of discrete-time constrained linear systems subject to bounded additive disturbances. We make use of the interpolation technique to construct a feedback policy and tighten the original system constraint accordingly to fulfill robust constraint satisfaction. A dynamic event trigger that allows the controller to solve the optimization problem only at triggering time instants is developed, where the triggering threshold is related to the interpolating coefficient of the feedback policy and determined via optimization. We show that the proposed algorithm is recursively feasible and the closed-loop system is input-to-state stable in the attraction region. Finally, a numerical example is provided to verify the theoretical results.
14 November 2022 in IEEE Transactions on Industrial Electronics
Energy efficiency and safety are two critical objectives for marine vehicles operating in environments with obstacles, and they generally conflict with each other. This paper proposes a novel online motion planning method for marine vehicles, which can take practical limitations into account and make trade-offs between the two objectives by exploiting the economic model predictive control (EMPC) technique. To achieve this, a trajectory generation method is first proposed, which provides the smooth reference evolved from the safest path and facilitates the measurement of safety degree. Then the EMPC-based motion planning framework, which accounts for system and environmental constraints, energy consumption, and safety margin, is proposed after the tailored energy cost function is designed. Furthermore, the receding horizon planning strategy for the developed planning framework is proposed, which explicitly addresses the non-negligible calculation time and the limited detection range. Finally, the effectiveness and feasibility of the proposed method are also validated through experiments.
18 July 2023 in IEEE Transactions on Control Systems Technology
This brief studies the online simultaneous motion planning and control of unmanned surface vessels (USVs) with multiple practical constraints. An online economic model predictive control (EMPC)-based integrated planning and control framework is developed to greatly reduce energy consumption. In particular, a novel heuristic terminal cost guarantees both the planning control performance and facilitates the online optimization, and an improved cross-entropy (CE)-based optimization algorithm speeds up the solving of the nonconvex economic optimization problem. Experimental results show that the proposed integrated planning and control approach can be implemented in real-time with the online optimization frequency of 100 Hz, and comparative studies indicate that it can save energy up to almost 18%.