Due to their flexibility, Electric Vehicles (EVs) constitute an important asset for the integration of renewable energy sources in the Smart Grid. In particular, they should have a dual role: as a controllable load and as a mobile generator with a low inertia. To perform these tasks, chargers must provide the electronics with a power flow from the grid to the vehicle and vice versa. This bidirectionality can also be implemented in wireless chargers. The power converters, the compensation networks and the coil misalignment must be considered when designing the control of these systems. This paper presents a review about the proposed algorithms to control the active and the reactive power flow in a bidirectional wireless charger.
10 April 2023 in IEEE Transactions on Transportation Electrification
Electric Vehicles (EVs) will be an important asset in future power grids, with a dual role as flexible loads and mobile generators. In order to implement a complete set of Vehicle-to-Grid (V2G) services, the EV chargers should be adapted for bidirectional power flow considering both active and reactive power. This paper proposes a simple but effective four-quadrant controller to adjust the two types of power (active and reactive) consumed or generated by the EV. Based on a theoretical analysis, it is developed the formulation to configure the power converts given a command of active and reactive power generated/consumed. As a novelty compared with previous works, any combination of the powers is possible to enable a flexible operation of the V2G wireless charger so that the vehicle can also participate in a wide range of V2G services through a wireless charger. The system is based on the Series-Series (SS) compensation topology, which is one of the most typical structures in wireless chargers. Experimental results at charging power up to 1 kW with a SAE J2954 EV charger prototype demonstrate the validity of the analytical study, in each of the eight operation modes.