Inmaculada Casaucao

Dr. Inmaculada Casaucao

Department of Electrical Engineering, Universidad de Málaga, Málaga, Andalusia, Spain
orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 August 2023 in IEEE Transactions on Transportation Electrification
Verified
Journal Article
Open access
ICInmaculada Casaucao
Inmaculada Casaucao
Alicia Triviño-CabreraAlicia Triviño-Cabrera
Alicia Triviño-Cabrera
Zhengyu LinZhengyu Lin
Zhengyu Lin
Wireless charging of Electric Vehicles (EVs) has become an important research topic in recent years. During the wireless charging process, wireless data exchange must take place between the EV and the charging station. Battery status, current and voltage of the charger or the EV identification may be required on the primary side in order for the system to operate properly. This data exchange can be carried out through commercial wireless communication solutions such as Bluetooth, 802.11 or ZigBee. However, these technologies introduce cybersecurity problems, high and variable transmission delays and possible connection losses during communication. To address these issues, numerous solutions have been proposed based on wireless data transmission through the wireless power transfer circuit. This paper gives a comprehensive review of the different issues that need to be considered for simultaneous wireless power and data transmission (SWPDT) for wireless EV charging applications. This context represents a challenge for SWPDT due to the power levels and the high probability of operating with notable misalignments or even with the EV on move. Specifically, a classification of SWPDT systems is described, and six different criteria to consider when designing a SWPDT system are analysed for EVs. The suitability of different system configurations is evaluated according to three representative use cases: (i) providing maximum efficiency, (ii) synchronisation for bidirectional wireless chargers and (iii) dynamic charging. We have also analysed the feasibility of using the Open Charge Point Protocol (OCPP) together with ISO 15118, which is the most popular communication protocol used in EV charging infrastructures,.

12 March 2024 in IEEE Transactions on Industrial Informatics
Verified
Journal Article
Open access
ICInmaculada Casaucao
Inmaculada Casaucao
Alicia Triviño-CabreraAlicia Triviño-Cabrera
Alicia Triviño-Cabrera
Fabio CortiFabio Corti
Fabio Corti
Alberto ReattiAlberto Reatti
Alberto Reatti
Simultaneous wireless power and data transfer (SWPDT) is a technology that enables the transfer of electrical power and data signals at the same time. Since the transfer is performed through the same physical link, particular attention must be placed on the frequency response and mutual influence between data and power channels. Although several studies have been proposed for SWPDT modeling applied to electric vehicles (EV), an extensive analysis of the influence of misalignment on the frequency response of the data channels is lacking in the literature. This article investigates the robustness to misalignment of the data channel using two main resonant topologies, such as those based on series–series (SS) and LCC – LCC compensation circuits. The analytical model of the data channel is derived for both topologies and the performances are evaluated in two lab prototypes using the misalignment scenarios described in the SAE J2954 standard. Variables, such as efficiency, signal-to-noise ratio (SNR), and capacity of the data channel have been analyzed. Similarly, attention has been paid to backward data transmission, which is of interest for vehicle-to-grid chargers. The obtained results in each analysis show that the data channel in LCC–LCC topology has a more stable and symmetrical performance.

10 April 2023 in IEEE Transactions on Transportation Electrification
Verified
Journal Article
Closed access
Alicia Triviño-CabreraAlicia Triviño-Cabrera
Alicia Triviño-Cabrera
ICInmaculada Casaucao
Inmaculada Casaucao
MPMiguel Castilla Prados
Miguel Castilla Prados
Electric Vehicles (EVs) will be an important asset in future power grids, with a dual role as flexible loads and mobile generators. In order to implement a complete set of Vehicle-to-Grid (V2G) services, the EV chargers should be adapted for bidirectional power flow considering both active and reactive power. This paper proposes a simple but effective four-quadrant controller to adjust the two types of power (active and reactive) consumed or generated by the EV. Based on a theoretical analysis, it is developed the formulation to configure the power converts given a command of active and reactive power generated/consumed. As a novelty compared with previous works, any combination of the powers is possible to enable a flexible operation of the V2G wireless charger so that the vehicle can also participate in a wide range of V2G services through a wireless charger. The system is based on the Series-Series (SS) compensation topology, which is one of the most typical structures in wireless chargers. Experimental results at charging power up to 1 kW with a SAE J2954 EV charger prototype demonstrate the validity of the analytical study, in each of the eight operation modes.

3 April 2023 in RSC Advances
Verified
Journal Article
Open access
PDF file
Alicia Triviño-CabreraAlicia Triviño-Cabrera
Alicia Triviño-Cabrera
ICInmaculada Casaucao
Inmaculada Casaucao
JGJuan Carlos Quirós Gil
Juan Carlos Quirós Gil
PPPaula Pérez
Paula Pérez
ARAntonio Rojas
Antonio Rojas
Unmanned aerial vehicles are clear candidates to benefit from wireless power transfer, as it can facilitate their charging process and even allow them to charge autonomously.

8 February 2025 in Electronics
Verified
Journal Article
Open access
PDF file
ICInmaculada Casaucao
Inmaculada Casaucao
ARAlejandro Linares del Rio
Alejandro Linares del Rio
Alicia Triviño-CabreraAlicia Triviño-Cabrera
Alicia Triviño-Cabrera
The integration of inductive charging technology in electric vehicles has aroused the interest of researchers in recent years. Specifically, one of the growing areas is wireless charging in Autonomous Underwater Vehicles (AUVs). In this environment, the effects of seawater in wireless power transmission should be carefully studied. Specifically, one of the effects that should be analysed is the appearance of parasitic capacitances (Ce) between the power coils due to the high conductivity of seawater. The parasitic capacitance, together with the power converters switching losses and the resistive and inductive losses, can lead to a drop in efficiency during the charging process. The main objective of this contribution is to find the optimal solution to avoid the effects of Ce during the coils design, thus simplifying the process and making it equivalent to an air-based solution. To do so, different design criteria have been defined with a comparative analysis among different topologies proposed. Specifically, we have studied the variations of voltage, current, and efficiency caused by the Ce. Additionally, a comparison between Series-Series (SS) and LCC–Series (LCC–S) compensation systems has been considered, studying the system efficiency and maximum current values found on the circuit. The results of these studies have been verified through experimental validations, where the design and implementation of the elements that constitute the inductive charger have been performed. This validation has demonstrated the possibility of neglecting the effects of Ce by optimising the coil’s design.

6 November 2024 in IEEE Access
Verified
Journal Article
Open access
ICInmaculada Casaucao
Inmaculada Casaucao
Alicia Triviño-CabreraAlicia Triviño-Cabrera
Alicia Triviño-Cabrera
ADAlberto Delgado
Alberto Delgado
In electric vehicle (EV) wireless charging, the misalignment between coils is an unavoidable issue that has been widely addressed in literature. One of the consequences of misalignment between coils is the variation of the self-inductance value. Additionally, it should be mentioned that ferromagnetic material is used to improve the system overall performance. Thus, this article studies the possibility of using the self-inductance variations as a criterion to determine the optimal ferromagnetic material layout, so that the effects of misalignment can be alleviated. For this reason, five different ferromagnetic topologies have been proposed, to perform a comparative analysis between them. The amount, size and layout of ferromagnetic material have been theoretically analyzed under realistic conditions and then, simulated through advanced simulation tools. Once the relations between misalignment and self-inductances, as well as ferrite layouts and self-inductances values have been achieved, it is determined that there is an optimal topology that leads to lower variations of self-inductances and, thus, presents a better performance under misalignment situations. This study has been performed and experimentally validated for a prototype of a SAE J2954-compliant EV 3.7-kW wireless charger, with a good agreement between simulated and experimental values.