Yamin Zheng

Dr. Yamin Zheng

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 August 2018 in Optics Letters
Verified
Journal Article
Closed access
PDF file
LSLicheng Sun
Licheng Sun
YGYading Guo
Yading Guo
CSChongfeng Shao
Chongfeng Shao
YLYang Li
Yang Li
YZYamin Zheng
Yamin Zheng
Lei HuangLei Huang
Lei Huang
In this Letter, a 10.8 kW, 2.6 times diffraction limited laser based on a continuous wave (CW) Nd:YAG oscillator using an unstable resonator and an extra-cavity adaptive optics system was presented. Two Nd:YAG slabs and a disk-laser configuration were used to make the laser compact and power scalable. The output was a rectangular annulus, which was further expanded to a square annulus and was adaptively corrected by an extra-cavity deformable mirror (DM). The DM was designed to be capable of correcting the square annular wavefront aberrations. In the experiment, the vertical beam quality was improved from 51.7 to 2.6 times diffraction limited after correction. To the best of our knowledge, this is the highest power and brightness based on a CW Nd:YAG oscillator.

28 August 2018 in Optics Express
Verified
Journal Article
Open access
PDF file
LSLicheng Sun
Licheng Sun
YZYamin Zheng
Yamin Zheng
CSChuang Sun
Chuang Sun
Lei HuangLei Huang
Lei Huang
The high-frequency aberrations (HIFAs) that are corresponding to the actuator array have been reported to exist on the initial surface shape of many deformable mirrors (DMs), such as the bimorph DM, the unimorph DM, the monomorph DM, and the membrane DM. This actuator-corresponding high-frequency aberration (AC-HIFA) could not be corrected effectively by the DM and would limit the correction ability of the DM. In this paper, we presented the AC-HIFA in a stacked array piezoelectric (PZT) DM, which may result in ghost damage that is dangerous in the high power laser system. More importantly, we investigated a solution through simulation and experiment that by using a mirror plate and a long thin post array, which were machined integrally from a piece of BK7 glass, the AC-HIFA could be eliminated completely. In addition, the structural parameters’ influences on the AC-HIFA were investigated in the simulation, which could help other researchers to determine appropriate parameters of the mirror and the posts and to make a fine surface shape in their own DMs.

21 November 2018 in Optics Express
Verified
Journal Article
Open access
PDF file
CSChuang Sun
Chuang Sun
LSLicheng Sun
Licheng Sun
YZYamin Zheng
Yamin Zheng
SLShibing Lin
Shibing Lin
Lei HuangLei Huang
Lei Huang
In a well-manufactured deformable mirror (DM), the temperature-induced distortion (TID) has been reported exist on the surface shape of the DM, when the working environment temperature is not equal to that of the manufacturing environment. The DM could not effectively correct this actuator-corresponding TID and the correction ability of the DM would be limited. In this paper, the the TID’s essential mechanism is analyzed systematically based on the thermal stress characteristics. An efficient method based on an auxiliary temperature compensation module (TCM) and a hybrid closed-loop control algorithm are presented accordingly. A finite element model is built to evaluate the TID characteristics and the compensation capability of the TCM. In the simulation, by using the TCM, the the DM’s improved surface shape does not contain the dynamic high-frequency distortion caused by the actuators tilt. In the experiment, which uses a designed TCM and a hybrid closed-loop control algorithm, a DM’s TID is effectively depressed and a well-compensated DM surface shape is finally achieved.

22 May 2024 in Applied Optics
Verified
Journal Article
Closed access
PDF file
YZYifan Zhang
Yifan Zhang
QBQi Bian
Qi Bian
LGLiquan Guo
Liquan Guo
SSStephen Shectman
Stephen Shectman
ZTZhongtian Tian
Zhongtian Tian
Lei HuangLei Huang
Lei Huang
The development of modern large-scale spectroscopic survey telescopes responds to the urgent demand for spectral information in astronomical research. Tsinghua University has previously proposed a 6.5 m MUltiplexed Survey Telescope consisting of a Ritchey-Chretien configuration and a 1.8 m multi-element wide-field corrector, achieving excellent performance and world-leading survey efficiency. However, an optimized 1.65 m multi-element corrector with five lenses is proposed to overcome the constraints on glass uniformity and verification in fabrication of the previous corrector design. It maintains outstanding image quality, with the 80% enclosed energy diameter not more than 0.559 arcsec within 3° FoV over up to a 55° zenith angle. The optimized optical system does not revise the working mode of the ADC or the curvature of the primary mirror while ensuring the reasonability and accuracy of manufacturing of large corrector elements. It provides a more feasible reference optical design for the MUltiplexed Survey Telescope in subsequent iterations and communications with manufacturers.

26 June 2019 in Optics Express
Verified
Journal Article
Closed access
PDF file
LSLicheng Sun
Licheng Sun
YZYamin Zheng
Yamin Zheng
CSChuang Sun
Chuang Sun
SLShibing Lin
Shibing Lin
DWDeen Wang
Deen Wang
Lei HuangLei Huang
Lei Huang
A shear-joint deformable mirror (DM) is important in the high-power laser systems such as the National Ignition Facility (NIF). In this paper, the print-through high-frequency aberration (PT-HIFA) that arises from adhesive curing and is corresponding to the actuator array is reported to exist in the initial surface shape of a lab-made shear-joint NIF DM. Meanwhile, experimental results show that the PT-HIFA has a great modulation on the laser intensity. This PT-HIFA could not be corrected effectively by the DM and may result in dangerous damage in the high power laser systems. In order to eliminate the PT-HIFA, we investigate the influence of the structural parameters on the PT-HIFA in a shear-joint DM through simulation and experiment. Simulational results show that the structural parameters have different influences on the PT-HIFA. In the experiment, by optimizing the structural parameters, the PT-HIFA could be eliminated in the shear-joint NIF DM and the modulation effect on the laser intensity could be removed. This investigation could help other researchers to determine appropriate structural parameters and to achieve a fine surface shape in their own shear-joint DMs.

22 June 2021 in Optics Letters
Verified
Journal Article
Closed access
DWDeen Wang
Deen Wang
MLMing Lei
Ming Lei
SLShibing Lin
Shibing Lin
YZYamin Zheng
Yamin Zheng
SKShaonan Kang
Shaonan Kang
Lei HuangLei Huang
Lei Huang
We report a novel, to the best of our knowledge, mode-tunable optical vortex generation method based on a mirror curvature dynamically controlled Z-shaped resonant cavity, a mode conversion beamline, and a reference laser beamline. By changing the mirror curvature of an intra-cavity deformable mirror (DM) at a certain pumping voltage and current, various Hermite–Gaussian (HG) mode beams were obtained in the Z-shaped resonant cavity of a laser diode pumped Yb:CALGO laser. The vortex beams were realized finally by using an external cavity astigmatism converter. In the experiment, the dynamic tuning of the 1st to 9th order HG mode beams and Laguerre–Gaussian mode vortex beams carrying different orbital angular momenta, ranging from 1 ℏ to 9 ℏ were achieved by dynamically adjusting the driving voltage of the DM.