Fang Chen

Ms. Fang Chen

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 May 2024 in Scientific Reports
Verified
Journal Article
Open access
PDF file
FCFang Chen
Fang Chen
JZJie Zhang
Jie Zhang
ZLZhenggui Li
Zhenggui Li
SYShengnan Yan
Shengnan Yan
WLWangxu Li
Wangxu Li
XLXiaobing Liu
Xiaobing Liu
The dispersion stability of carbonyl iron particle (CIP)-based magnetorheological fluid (MRF) is improved by CIP, which particle is etched with hydrochloric acid (HCl) to form porous structure with many hydroxyl groups and subsequently coated with silane coupling agents that have varying chain lengths. The microstructures, coating effect and magnetism of the CIPs were examined using the Scanning Electron Microscopy, Automatic Surface and Porosity Analyzer (BET), Fourier-Transform Infrared Spectroscopy, Thermogravimetric Analysis and Vibrating Sample Magnetometer. Furthermore, the rheological properties and dispersion stability of the MRFs were assessed using a Rotating Rheometer and Turbiscan-lab. The results revealed that the nanoporous structure appeared on the CIPs and the specific surface area increased remarkably after being etched by hydrochloric acid. Additionally, as the chain length of the silane coupling agent increases, the coated mass on the particles increases, the the density and the saturation magnetization of particles decreased, and the coated particles with different shell thicknesses were obtained; without a magnetic field, the viscosity of MRF prepared by coated particles increase slightly, due to the enhancement of special three-dimensional network structure; under a magnetic field, the viscosity of the MRF decreased distinctly; the sedimentation rate of MRF decreased from 58 to 3.5% after 100 days of sedimentation, and the migration distances of the MRFs were 22.4, 3.7, 2.4, and 0 mm, with particle sedimentation rates of 0.149, 0.019, 0.017, and 0 mm/h, respectively. The MRF with high dispersion stability was obtained, and the etching of CIP by HCl and the proper chain length of the coating of silane coupling agent were proved effective manners to improve the dispersion stability of MRF.

9 October 2021 in Nanomaterials
Verified
Journal Article
Open access
PDF file
FCFang Chen
Fang Chen
XLXiaobing Liu
Xiaobing Liu
ZLzhenggui Li
zhenggui Li
SYShengnan Yan
Shengnan Yan
HFHao Fu
Hao Fu
ZYZhaoqiang Yan
Zhaoqiang Yan
The rheological properties of ferrofluids are related to various applications, such as sealing and loudspeakers, and have therefore attracted widespread attention. However, the rheological properties and their influence on the mechanisms of perfluoropolyether oil (PFPE oil)-based ferrofluids are complicated and not clear. Here, a series of PFPE oil-based ferrofluids were synthesized via a chemical co-precipitation method, and their rheological properties were revealed, systematically. The results indicate that the prepared Zn-ferrite particles have an average size of 12.1 nm, within a range of 4–18 nm, and that the ferrofluids have excellent dispersion stability. The activity of the ferrofluids changes from Newtonian to non-Newtonian, then to solid-like with increasing w from 10 wt% to 45.5 wt%, owing to their variation in microstructures. The viscosity of the ferrofluids increases with increasing Mw (the molecular weight of base liquid PFPE oil polymer), attributed to the increase in entanglements between PFPE oil molecules. The magnetization temperature variation of Zn-ferrite nanoparticles and viscosity temperature variation of PFPE oil together contribute to the viscosity temperature change in ferrofluids. The viscosity of the ferrofluids basically remains unchanged when shear rate is above 50 s−1, with increasing magnetic field strength; however, it first increases and then levels off when the rate is under 10 s−1, revealing that the shear rate and magnetic field strength together affect viscosity. The viscosity and its alteration in Zn-ferrite/PFPE oil-based ferrofluids could be deduced through our work, which will be greatly significant in basic theoretical research and in various applications.

10 September 2024 in Materials
Verified
Journal Article
Open access
PDF file
FCFang Chen
Fang Chen
JZJie Zhang
Jie Zhang
QGQinkui Guo
Qinkui Guo
YLYuchen Liu
Yuchen Liu
XLXiaobing Liu
Xiaobing Liu
ZLzhenggui Li
zhenggui Li
The coating effect of 1,2-bis(triethoxysilyl)ethane (BTES) on carbonyl iron particles (CIPs) was enhanced by etching with hydrochloric acid (HCl) of various concentrations, and magnetorheological fluids (MRFs) with significantly improved dispersion stability were obtained. The microstructures, coating effect, and magnetism of CIPs were examined using scanning electron microscopy (SEM), automatic surface and porosity analysis (BTE), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and a vibrating sample magnetometer (VSM), respectively. Furthermore, the rheological properties and dispersion stability of the MRFs were assessed by a rotating rheometer and a Turbiscan Tower. The results show that as the HCl concentration increased, nanopores appeared on CIPs and then disappeared, and the specific surface area of the particles increased and then decreased. When the concentration of HCl was 0.50 mol/L, the number of nanopores and the specific surface area of particles changed sharply. Not only that, the coated mass of BTES increased greatly and the saturation magnetization of particles decreased sharply. As the coated mass increased, without a magnetic field, the viscosity and shear stress of the MRFs increased, especially when the coated mass was more than 2.45 wt.%; while under a magnetic field, the viscosity and shear stress decreased, and the sedimentation rate of the MRFs decreased from 0.13 to 0.01 mm/h. By controlling the concentration of HCl for etching, the coating effect of CIPs was greatly enhanced, and thus an MRF with superior shear stress and excellent dispersion stability was obtained, which is significant in basic research and MRF-related applications.

1 March 2025 in Physics of Fluids
Verified
Journal Article
Closed access
YZYi Zhao
Yi Zhao
SYShengnan Yan
Shengnan Yan
ZLzhenggui Li
zhenggui Li
FCFang Chen
Fang Chen
ZQZhao Qin
Zhao Qin
XYXiaolin Yang
Xiaolin Yang
The pressure fluctuation data in the pump-turbine runner region exhibit significant nonlinearity. The method of utilizing neural networks is employed to analyze pressure fluctuations in order to determine the occurrence of cavitation phenomena. This paper presents a model that utilizes a VMD (variational mode decomposition)-optimized algorithm combined with GRU (gated recurrent unit)–attention for the prediction of pressure fluctuations, aiming to facilitate the forecasting of cavitation-induced failures. Using data collected from a real machine over the course of one day, predictions were made using three different models: a standalone GRU, a combination of GRU and Attention mechanisms, and a combination of VMD and three different optimization algorithms. The evaluation of prediction performance indicates that the VMD–dung beetle optimization–GRU–attention model not only captures the nonlinear characteristics of the actual values but also aligns more closely with the trend of the real data. The error assessment results demonstrate that this model exhibits superior predictive performance. Analyze the prediction of pressure pulsation at three different locations between the runner and the guide vane, top and bottom cover. This method enables effective predictions of cavitation conditions up to 50 minutes in advance, showcasing its potential for practical engineering applications.

22 September 2023 in Frontiers in Materials
Verified
Journal Article
Open access
FCFang Chen
Fang Chen
JZJie Zhang
Jie Zhang
XLXiaobing Liu
Xiaobing Liu
SYShengnan Yan
Shengnan Yan
WLWangxu Li
Wangxu Li
ZLzhenggui Li
zhenggui Li
A series of ferrite nanoparticles were synthesized via ion doping and then were coated by surfactant and dispersed in perfluorinated polyether oil (PFPE-oil), and the various ferrite ferrofluids were obtained. The scanning electron microscope was used to characterize the morphology of particles and the dispersed state of ferrofluid, energy-dispersive spectroscopy was used to study the chemical composition of particles, fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis were used to study the coated effect of PFPE-acids on particles, vibrating sample magnetometer was used to research the magnetization curves of ferrite particles, and the rheological property of the ferrite ferrofluids was studied by a rheometer. The results show that Zn2+, Mn2+/Zn2+, and Dy3+ ions were doped in the ferrite nanoparticles with a size less than 50 nm. The four kinds of ferrite nanoparticles have the characteristics of super-paramagnetic materials, and the M-T curves decrease with increasing temperature, while their decline rates are notably different. The ferrite particles are coated with PFPE acids chemically, and the ferrofluids have well dispersion stability. The rheological properties of the ferrite ferrofluids change with the variation of ion doping, magnetic field strength, temperature, etc. The magnetism and viscosity of ferrite ferrofluids are regularly affected by ion doping, and the results will have a great significance on basic research and related applications.

8 December 2025 in Magnetochemistry
Verified
Journal Article
Open access
PDF file
FCFang Chen
Fang Chen
YLYuchen Liu
Yuchen Liu
QGQinkui Guo
Qinkui Guo
YXYangjie Xiao
Yangjie Xiao
YDYuan Dong
Yuan Dong
ZLzhenggui Li
zhenggui Li
A series of high-viscosity ferrofluids with variations in particle concentration and carrier liquid molecular weight were synthesized in a fluoroether oil base by the chemical coprecipitation method. The microstructure, surface coating, and magnetic properties of the nanoparticles were characterized, and the rheological properties of the corresponding ferrofluids were systematically investigated to elucidate their governing mechanisms and underlying mechanisms. The results indicate that the synthesized zinc-doped ferrite particles are spherical with a size of less than 50 nm and are chemically coated with a fluoroether acid. Moreover, the saturation magnetization of the ferrofluids increases with rising particle concentration. With the increase in particle concentration, the zero-field viscosity and shear stress of the ferrofluids increase significantly. The zero-field viscosity and shear yield stress of the ferrofluid increase significantly with the molecular weight of the carrier liquid, due to the strengthened entanglement of its molecular chains. At a carrier liquid molecular weight of 4600 g/mol, the 50 wt.% ferrofluid displayed a liquid character, in contrast to the gel-like character displayed by the 60 and 70 wt.% samples. The 60 wt.%-7480 g/mol sample demonstrated superior elasticity to its 60 wt.%-4600 g/mol counterpart. Furthermore, the application of a 100 mT magnetic field induced a transition from a liquid to a gel state in the 50 wt.%-4600 g/mol sample. This transition, driven by the formation of magnetic field-induced chain-like structures, significantly enhanced the magnetoviscous effect. This study provides the theoretical basis and experimental support for the development of high-viscosity ferrofluid sealing materials suitable for high-pressure, liquid environments and corrosive working conditions.