This article details the construction of an experimental visualization platform for observing cavitation. The platform uses high-speed photography and particle image velocimetry (PIV) techniques to conduct experimental research into the flow pattern and vortex field of cavitation in Venturi tubes. Dynamic mode decomposition is employed to extract the energy distribution characteristics of the cavitation flow field. Cavitation occurs at an exit-to-inlet pressure ratio of 0.595, and the length of the cavitation zone increases as this ratio decreases. When the pressure ratio reaches 0.280, the flow rate remains almost constant and the flow becomes chocked. The cavitation shape evolves periodically in the chocking flow, and the cavitation zone can be divided into three parts: an initiation and development area, a fusion area, and a collapse area. The fusion area exhibits periodic changes in the form of contraction, expansion, and re-contraction. Near the wall, the collapse area exhibits complex boundary conditions, with re-entrant jet causing bubble aggregation, rolling, and shedding. PIV and energy extraction reveal that vortices primarily appear near the wall, where they undergo a periodic process of fragmentation and fusion. The strength of the vortices exhibits a small–large–small pattern that is related to the cloud aggregation, rolling, and shedding caused by the re-entrant jet.
The pressure fluctuation data in the pump-turbine runner region exhibit significant nonlinearity. The method of utilizing neural networks is employed to analyze pressure fluctuations in order to determine the occurrence of cavitation phenomena. This paper presents a model that utilizes a VMD (variational mode decomposition)-optimized algorithm combined with GRU (gated recurrent unit)–attention for the prediction of pressure fluctuations, aiming to facilitate the forecasting of cavitation-induced failures. Using data collected from a real machine over the course of one day, predictions were made using three different models: a standalone GRU, a combination of GRU and Attention mechanisms, and a combination of VMD and three different optimization algorithms. The evaluation of prediction performance indicates that the VMD–dung beetle optimization–GRU–attention model not only captures the nonlinear characteristics of the actual values but also aligns more closely with the trend of the real data. The error assessment results demonstrate that this model exhibits superior predictive performance. Analyze the prediction of pressure pulsation at three different locations between the runner and the guide vane, top and bottom cover. This method enables effective predictions of cavitation conditions up to 50 minutes in advance, showcasing its potential for practical engineering applications.
Gas–liquid separation at natural gas wellheads has always been a key technical problem in the fields of natural gas transportation and storage. Developing a gas–liquid separation device that is both universal and highly efficient is the current challenge. A new type of combined gas–liquid separation device was designed in this study, and the efficiency of the separator was studied using a laser Doppler anemometer and phase Doppler particle analyzer at a flow rate of 10–60 Nm3/h. The results showed that the separation efficiency of the combined separator was above 95% at each experimental flow rate, verifying the strong applicability of the combined separator. Moreover, the separation efficiency was as high as 99% at the flow rates of 10 and 60 Nm3/h, thereby realizing efficient separation. This study is significant to the development of gas–liquid separation devices.
Sediment-laden water significantly exacerbates the cavitation damage in hydraulic machinery compared to clear water, underscoring the importance of investigating the effects of sediment on cavitation. This study examines cavitation in sediment-laden water using a Venturi flow channel and a high-speed camera system. Natural river sand samples with a median diameter of 0.05, 0.07, and 0.09 mm are selected, and sediment-laden water with a concentration of 10, 30, and 50 g/L is prepared. The results indicate that increasing the sediment concentration or reducing the sediment size intensifies cavitation, and the influence of the sediment concentration is significantly greater than that of the sediment size. Meanwhile, the numerical simulation is conducted based on a gas–liquid–solid phase mixing model. The findings indicate that a higher sediment concentration corresponds to a greater shearing effect near the wall, which raises the drag on the attached sheet-like cavitation clouds and enhances the re-entrant jet which can intensify the shedding of cavitation clouds. Furthermore, sediment particles contribute to more vortices. Therefore, for hydraulic machinery operating in sediment-laden water of high concentration, the relative velocity should be reduced to mitigate the shearing effect, thereby weakening the synergy of cavitation and sediment erosion at the turbine runner.
Sediment-laden water significantly exacerbates cavitation damage in hydraulic machinery compared to clear water, underscoring the importance of investigating the effects of sediment on cavitation. This study examines cavitation in sediment-laden water using a Venturi flow channel and a high-speed camera system is utilized to capture the morphology and evolution of cavitation clouds. Natural river sand samples with a median diameter of 0.05, 0.07, and 0.09 mm are selected, and sediment-laden water with a concentration of 10, 30, and 50 g/L is prepared for the study. The results indicate that increasing sediment concentration or reducing sediment size intensifies cavitation, shortens the evolution cycle of cavitation clouds, and elevates the frequency of cavitation cloud shedding. Meanwhile, numerical simulation is conducted based on a gas-liquid-solid phase mixing model. The findings indicate that a higher sediment concentration corresponds to a greater shear effect near the wall, which raises the drag on the attached sheet-like cavitation clouds and enhances the re-entrant jet which can intensify the shedding of cavitation clouds. Furthermore, sediment particles contribute to more vortex: they enhance the impact on smooth, wall-adjacent sheet-like vortex, while simultaneously consuming more energy during the vortex return process, resulting in the creation of additional small-scale vortices.
In order to solve the challenge posed by the strong nonlinearity of pressure pulsation data in the runner region of pump-turbines for the prediction of cavitation faults, this study utilizes neural networks to explore the potential connection between cavitation coefficients and pressure pulsations. The Variational Mode Decomposition-Dung Beetle Optimizer-Gated Recurrent Unit-Attention (VMD-DBO-GRU-Attention) composite model is applied for pressure pulsation prediction to identify cavitation faults. Based on the measured data of a unit, a single gated recurrent unit-attention (GRU) model, a GRU combined with Attention mechanism model, and the newly constructed VMD-DBO-GRU-Attention model are compared for prediction. After evaluation of the prediction results, the VMD-DBO-GRU-Attention model accurately portrays the nonlinear signals of pressure pulsation, and the prediction curves are highly consistent with the trend of the actual values, with a number of error indicators better than those of the comparison model. Meanwhile, by analyzing the pressure pulsations at the three positions, including between the runner and the top cover, and comparing them with the actual engineering data, the method can predict the operating status of the unit more than 15 min in advance, which shows good engineering practical value.