Ruoyu Su

Dr. Ruoyu Su


Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 January 2021 in IEEE Transactions on Vehicular Technology
Verified
Journal Article
Closed access
RSRuoyu Su
Ruoyu Su
ZGZijun Gong
Zijun Gong
DZDengyin Zhang
Dengyin Zhang
CLCheng Li
Cheng Li
YCYuanzhu Chen
Yuanzhu Chen
RVRamachandran Venkatesan
Ramachandran Venkatesan
Underwater acoustic sensor networks (UWSNs), acting as a reliable and efficient infrastructure of the Internet of underwater things (IoUT), have attracted much research interest in recent years due to the wide range of their potential marine applications. The limited energy supply of underwater sensor nodes is a significant challenge that can be mitigated by the cyclic difference set (CDS)-based coordination asynchronous wake-up scheme. However, the CDS-based asynchronous wake-up scheme also introduces long delays in the neighbor discovery that deteriorates packet delay as well as the network lifetime. In this paper, we formulate the problem of policy selection for idle listening as a Markov decision process and exploit the framework of deep reinforcement learning to obtain the optimal policies of underwater sensor nodes. Furthermore, the long short-term memory (LSTM) networks are utilized to estimate the network traffic feature, which can improve the performance of the proposed adaptive asynchronous wake-up scheme. To verify the performance of the proposed scheme, simulations in different network scenarios are conducted with the comparison of random, fixed metric policies, and original CDS-based asynchronous wake-up schemes.

19 March 2024 in IEEE Transactions on Signal Processing
Verified
Journal Article
Closed access
RSRuoyu Su
Ruoyu Su
ZGZijun Gong
Zijun Gong
CLCheng Li
Cheng Li
Shuai HanShuai Han
Shuai Han
An autonomous underwater vehicle (AUV) can be employed to estimate an underwater target’s position using the Doppler shift measurement extracted from received signals. Conventionally, the received signals have to be divided into several short frames so that the Doppler shift is constant in each one. When the AUV is far away from the target, the signal to noise ratio (SNR) is quite low. An intuitive solution is to increase the frame length to suppress noise and boost SNR. However, it is worth noting that the Doppler shift is actually changing over time, and the prolonged frame length will inevitably induce modeling error. This is a fundamental dilemma in the Doppler-shift-based underwater localization. In this paper, we reveal that the assumption of constant Doppler shift comes from the zero-th order Taylor expansion of the real-time model. To increase the frame length without jeopardizing the model accuracy, we modify the model by taking the first-order Taylor expansion. By doing so, the frame length can be prolonged by one order of magnitude without introducing non-negligible modeling error. What this new model says is that when the target broadcasts a single-tone signal, the AUV will receive a linear frequency modulated (LFM) signal parameterized by a Doppler shift and a corresponding changing rate, i.e., Doppler rate. Although the Doppler rate is very small, it helps us improve the estimation accuracy of Doppler shift. Besides, the Doppler rate also contains target’s position information. Thus, a two-phase localization algorithm is proposed by jointly using the Doppler shift and the Doppler rate measurements. Intuitively, the Doppler rate is only loosely related to the target’s position and should not significantly contribute to the localization accuracy, but the Cramér-Rao lower bound (CRLB) analysis says differently. This can be explained by showing that the Doppler rate complements the vanishing degree of freedom (DoF) in the position information for far-field localization, i.e., the information fusion. The theoretical results are verified through extensive simulations.

20 October 2023 in IEEE Transactions on Signal Processing
Verified
Journal Article
Closed access
ZGZijun Gong
Zijun Gong
XSXuemin Sherman Shen
Xuemin Sherman Shen
CLCheng Li
Cheng Li
YSYuhui Song
Yuhui Song
RSRuoyu Su
Ruoyu Su
It is expected that the sixth-generation (6G) cellular networks will provide high-accuracy positioning services. For the millimeter wave (mmWave) frequency band in 6G, both the Doppler and the spatial wideband effects can lead to channel variation in time and space domains, respectively. However, the impact of these effects on the positioning performance is not well studied. In this paper, we will investigate this issue and show that these two effects are not only challenges, but also provide great opportunities in terms of positioning in vehicular networks. Particularly, we will conduct system modeling, algorithm design, and fundamental performance analysis of simultaneous localization and communications (SLAC) in mmWave-based vehicular networks, exclusively dependent on channel state information. The major challenge in algorithm design is the high computational complexity that comes with the huge antenna arrays and bandwidth. For high-speed vehicle positioning, timeliness is as important as accuracy. For performance evaluation, the Cramér-Rao lower bounds (CRLB) will be derived as benchmarks. We will show that it is possible to achieve CRLB-level positioning accuracy, with almost linear complexity. With the closed-form theoretical results, we will evaluate how different system parameters contribute to positioning accuracy, such as bandwidth, carrier frequency, size and orientation of antenna arrays, etc. These results will shed light on system-level design and optimization of SLAC with ultra-wide frequency band in highly dynamic environments, i.e., very strong spatial wideband and Doppler effects. Comprehensive numerical results will also be presented to verify the theoretical analyses and the effectiveness of the proposed algorithms.

6 June 2019 in Electronics
Verified
Journal Article
Open access
PDF file
FDFei Ding
Fei Ding
ZMZitong Ma
Zitong Ma
ZLZhiliang Li
Zhiliang Li
RSRuoyu Su
Ruoyu Su
DZDengyin Zhang
Dengyin Zhang
HZHongbo Zhu
Hongbo Zhu
With the development and the characteristics of terminal services of the 5G (5th-Generation network) Internet of Vehicles (IoVs), this paper proposes a distributed splitting strategy for multi-type services of 5G V2X (Vehicle to X) networks. Based on a service-oriented adaptive splitting strategy in heterogeneous networks, combined with various service types such as communications between the networks, terminal, and base stations, and the value-added services of 5G IoVs, the proposed strategy jointly considers delay and cost as optimization goals. By analyzing the characteristics of the different services, the proposed traffic flow splitting strategy is modeled as an optimization problem to efficiently split services in 5G V2X networks. The simulation results show that by setting the traffic distribution policy for each service, the distributed traffic flow splitting strategy can significantly improve network transmission efficiency and reduce the service costs in a vehicle V2X network.

27 May 2025 in IEEE Internet of Things Journal
Verified
Journal Article
Closed access
RSRuoyu Su
Ruoyu Su
ZGZijun Gong
Zijun Gong
HCHao Cheng
Hao Cheng
CLCheng Li
Cheng Li
Fast underwater localization serves as a critical application of Internet-of-Underwater-Things (IoUT), such as underwater search and rescue. Narrowband sinusoidal pulses are very commonly used in locator beacons installed on flight recorders. A mobile anchor [e.g., autonomous underwater vehicle (AUV)] has to keep receiving the signal and measuring Doppler shift for a long time, so that enough information can be collected for reliable localization. The need of a long-observation window is deeply rooted in the fact that the Doppler shift measurements are highly correlated when they are taken at closely located spots. In this article, we will show that by replacing the narrowband beacon signal with a wideband one, high-accuracy positioning can be achieved within a short period of time. The basic idea is to simultaneously measure Doppler shift and time of arrival (ToA) from wideband signals, and the errors spaces corresponding to these two measurements are complementary even when they are taken at the same position. The Cramér-Rao bound (CRB) will be derived for such a system. In low-signal-to-noise ratio (SNR) regime, the observation window has to be prolonged for effective information extraction, and we will see that the wideband signals still have an edge over the narrowband signals in positioning accuracy. Efficient algorithms are designed for positioning and the closed-form positioning error is derived. We also show that the localization accuracy will experience a significant drop when ToA is replaced by time difference of arrival (TDoA), because the perfect complementation no longer holds. The performance of the proposed algorithm, along with corresponding comparisons, is verified through simulations over various parameters, such as SNR, number of measurements, and length of observation window, etc.

1 November 2018 in IEEE Access
Verified
Journal Article
Open access
FDFei Ding
Fei Ding
RSRuoyu Su
Ruoyu Su
ETEn Tong
En Tong
DZDengyin Zhang
Dengyin Zhang
HZHongbo Zhu
Hongbo Zhu
MIMohamed Wahab Mohamed Ismail
Mohamed Wahab Mohamed Ismail
The internet of vehicles (IoV) has become an attractive research topic in the fields of communication networks and information processing due to its wide range of potential applications, including public transportation management, road traffic predication and control, environmental monitoring, and autonomous driving. Most researches analyze the IoV’s data collected by dedicated machine-to-machine (M2M)-based platforms. Moreover, due to lack of field experimental data, the data transmission mechanism from mobile vehicle terminals to the M2M-based platform rarely considers the proper transmission timing according to current network performance and traffic conditions. To solve these problems, we propose an open M2M-based framework of wireless monitoring system for IoV. In the proposed framework, we design and implement a prototype of the mobile vehicle terminal. We also define the procedure of data transmission between the mobile vehicle terminal and the M2M-based platform. To prolong the lifetime of the mobile vehicle terminal, energy-efficient data transmission schemes for stopped and running vehicles are proposed respectively, which reduce the unnecessary data transmission by jointly considering the variation of vehicle speed and received signal strength (RSS). We conduct a field experiment to verify the basic functions of the proposed M2M-based IoV monitoring system as well as the mobile vehicle terminal. Furthermore, the experimental results show that the proposed M2M-based platform with the mobile vehicle terminal enables customized and energy-efficient data delivery.