To evaluate the feasibility of substituting mechanical testing with finite element simulation for basalt-fiber-grid-reinforced concrete, this study fabricated two-way slab specimens with varying basalt fiber grid layers. Flexural tests revealed load–deflection response characteristics of both fiber-reinforced and plain concrete. An ANSYS-based refined finite element model successfully replicated bending deformation patterns and grid failure modes under identical conditions, with experimental-simulation comparisons validating model accuracy (error < 8%). Through parametric secondary development, the model was extended to analyze 9 single-layer and 72 double-layer grid configurations. A high-precision response surface model (R2 ≥ 0.99) was established via nonlinear regression, enabling rapid performance prediction for arbitrary grid arrangements. This computational framework provides a reliable simulation tool for digital design of fiber-reinforced concrete components.
A large landslide struck the Zhenba Dahekou area of Shaanxi Province, China, on 9 September 2021. To accurately extract landslide displacement in emergency situations, in this study, we explore the feasibility and effectiveness of using satellite images and post-failure emergency UAV images to investigate the large displacement of the landslide through the pixel offset tracking (POT) method and evaluate four different POT methods, including NCC operated in the spatial domain (NCC), the orientation correlation method in ImGRAFT software (ImGRAFT), the multi-pass method in GIV software (GIV), and the frequency method in COSI-Corr software (COSI-Corr). It is found that the Zhenba landslide has moved southwest by about 74.3 m~96.4 m with the sliding direction between 231°~258°. The southward displacement of the landslide gradually decreases from southeast to northwest, and the westward displacement on the west side is greater than that on the east side. The relative matching precision of the POT methods in stable areas reached 0.8 m, superimposed on an image registration RMSE of 1.2 m. Under the experimental conditions of this study, ImGRAFT demonstrated robust overall performance. In terms of matching ability, ImGRAFT and NCC outperform GIV and COSI-Corr. In terms of displacement gradients expression ability, ImGRAFT and COSI-Corr outperform NCC and GIV; in terms of matching efficiency, COSI-Corr, GIV, and ImGRAFT are far superior to NCC. This study expands the application of multi-source optical data to investigate landslides and provides suggestions for the displacement extraction of large-displacement landslides, which will be helpful for the emergency investigation and research of landslides in the future.
To reveal the synergistic effect of chopped fibers and basalt fiber textile in different failure stages of concrete, this study investigated the hybrid effects of chopped basalt fibers, polypropylene fibers, and end-hooked steel fibers and basalt fiber textile on concrete at the stages of initial cracking, crack propagation, and post-peak softening. The four-point bending test results show that the basalt fiber textile has limited effect on the initial crack strength but can increase the ultimate load by 19.98% and the ultimate deflection by 175.94% compared with plain concrete by inhibiting macroscopic crack propagation. There is a complex synergistic effect between chopped fibers and fiber textile. Chopped fibers can compensate for the insufficient reinforcement of the textile in the initial cracking stage, while the textile dominates the toughness maintenance in the later stage of crack development. The hybrid system of chopped fibers and textile can enhance the flexural bearing capacity of textile-reinforced concrete. The mixture of polypropylene fibers or basalt fibers with fiber textile exhibits a post-peak embrittlement trend, while the ternary system of basalt fibers, end-hooked steel fibers, and fiber textile can achieve synergistic optimization of strength and toughness. Its peak load, bending toughness index of I20, and peak load deflection increased by 44.30%, 50.71%, and 13.76%, respectively, compared with the control group. This study provides theoretical support for the material design of high-performance basalt fiber textile-reinforced concrete and its application in thin-walled, prefabricated, and seismic strengthening engineering.