The safety of construction workers is always a major concern at construction sites as the construction industry is inherently dangerous with many factors influencing worker safety. Several studies concluded that psychological factors such as workload, organizational relationships, mental stress, job security, and job satisfaction have significant effects on workers’ safety. However, research on psychological factors that are characteristic of different age groups have been limited. The aim of this study was to examine the impact of psychological factors on the perception of worker safety for two different age groups. After an extensive literature review, different psychological factors were identified, and a hypothetical research model was developed based on psychological factors that could affect workers’ perception of safety. A survey instrument was developed, and data were collected from seven different construction sites in Pakistan. Structural equation modeling (SEM) was employed to test the hypothetical model for both age groups. The results revealed that workload and job satisfaction are significantly dominant factors on workers’ perception of safety in older workers, whereas organizational relationships, mental stress, and job security are dominant factors for younger workers at construction sites.

The management of a controllable production in the manufacturing system is essential to achieve viable advantages, particularly during emergency conditions. Disasters, either man-made or natural, affect production and supply chains negatively with perilous effects. On the other hand, flexibility and resilience to manage the perpetuated risks in a manufacturing system are vital for achieving a controllable production rate. Still, these performances are strongly dependent on the multi-criteria decision making in the working environment with the policies launched during the crisis. Undoubtedly, health stability in a society generates ripple effects in the supply chain due to high demand fluctuation, likewise due to the Coronavirus disease-2019 (COVID-19) pandemic. Incorporation of dependent demand factors to manage the risk from uncertainty during this pandemic has been a challenge to achieve a viable profit for the supply chain partners. A non-linear supply chain management model is developed with a controllable production rate to provide an economic benefit to the manufacturing firm in terms of the optimized total cost of production and to deal with the different situations under variable demand. The costs in the model are set as fuzzy to cope up with the uncertain conditions created by lasting pandemic. A numerical experiment is performed by utilizing the data set of the multi-stage manufacturing firm. The optimal results provide support for the industrial managers based on the proactive plan by the optimal utilization of the resources and controllable production rate to cope with the emergencies in a pandemic.

This research study aims at addressing the paradigm of whole body fatigue and local muscle fatigue detection for squat lifting. For this purpose, a comparison was made between perceived exertion with the heart rate and normalized mean power frequency (NMPF) of eight major muscles. The sample consisted of 25 healthy males (age: 30 ± 2.2 years). Borg’s CR-10 scale was used for perceived exertion for two segments of the body (lower and upper) and the whole body. The lower extremity of the body was observed to be dominant compared to the upper and whole body in perceived response. First mode of principal component analysis (PCA) was obtained through the covariance matrix for the eight muscles for 25 subjects for NMPF of eight muscles. The diagonal entries in the covariance matrix were observed for each muscle. The muscle with the highest absolute magnitude was observed across all the 25 subjects. The medial deltoid and the rectus femoris muscles were observed to have the highest frequency for each PCA across 25 subjects. The rectus femoris, having the highest counts in all subjects, validated that the lower extremity dominates the sense of whole body fatigue during squat lifting. The findings revealed that it is significant to take into account the relation between perceived and measured effort that can help prevent musculoskeletal disorders in repetitive occupational tasks.

The purpose of this study is to determine heart rate variability (HRV) parameters that can quantitatively characterize game addiction by using electrocardiograms (ECGs). 23 subjects were classified into two groups prior to the experiment, 11 game-addicted subjects, and 12 non-addicted subjects, using questionnaires (CIUS and IAT). Various HRV parameters were tested to identify the addicted subject. The subjects played the League of Legends game for 30–40 min. The experimenter measured ECG during the game at various window sizes and specific events. Moreover, correlation and factor analyses were used to find the most effective parameters. A logistic regression equation was formed to calculate the accuracy in diagnosing addicted and non-addicted subjects. The most accurate set of parameters was found to be pNNI20, RMSSD, and LF in the 30 s after the “being killed” event. The logistic regression analysis provided an accuracy of 69.3% to 70.3%. AUC values in this study ranged from 0.654 to 0.677. This study can be noted as an exploratory step in the quantification of game addiction based on the stress response that could be used as an objective diagnostic method in the future.

Design and manufacturing are the key steps in the sustainable manufacturing of any product to be produced. Within the perspective of injection molds production, increased competitiveness and repeated changes in the design require a complete optimized manufacturing process. Local and minor improvements in the milling process do not generally lead to an optimized manufacturing process. The goal of the new geometry and parametric analysis of the mould is to reduce the quality issues in mild steel grade 60. In this explicit research, the surface roughness (smoothness) of indigenously produced injection moulds in the local market in Pakistan is investigated. The CNC milling machine (five-axis) is used for the manufacturing of an injection mould, and the Taguchi method of the design of the experiment is applied for parameters optimization. Hence, the overall process is assisted in balancing the milling machine parameters to trim down the surface roughness issue in mild steel moulds and increase their sustainability. The spindle speed (rpm), the depth of cut (mm), and the feed rate (mm/rev) are considered as input variables for process optimization, and the experiments are performed on mild steel grade 60. It is deduced that the combination of a spindle speed of 800 rpm, feed rate of 10 mm/rev and depth of cut of 0.5 mm is the best case in case of minimum surface roughness, which leads to sustainable products. It is also deduced from ANOVA, that the spindle speed is a factor that affects the surface roughness of mild steel products, while the feed rate turns out to be insignificant.

In Pakistan most of the local hospitals have limited resources and budget deficits to address day-to-day routine activities. This is further intensified by inefficient management of hospital resources. Hence, it is essential to efficiently manage hospital resource as it will lead to health care costs reduction and increased patient’s satisfaction. The focus of this research is to demonstrate the use of the tool in healthcare system, specifically in Pakistan, and balance the resources of a hospital, which will reduce the waiting time for the Outdoor Patients Departments. The resources at the Outdoor Patients Department including X-ray, Labs, Ultrasound and the ECG sections were included in the computer-based simulation model with the aim to find the bottleneck departments as they are the main cause of waiting time in the hospital. These bottlenecks are anticipated due to the lack of an optimized model, which has been addressed in this simulation. Based on the simulation study an optimized model is proposed to the hospital administration where the resources are readjusted resulting in the utilization of underutilized departments and decreasing the waiting time of the stations particularly the bottleneck stations. The motivation behind this research is to aid hospitals in better management of resources, which can ultimately improve customers (patients) satisfaction.