This research introduced an energy-efficient drying method combining hot-air drying with stepwise microwave heating for producing quick-cooking red beans. Crucial parameters such as the effective diffusivity coefficient (D_e), and specific energy consumption (SEC) were examined across varying conditions with the aim of optimizing the drying condition. The results showed that D_e and SEC varied in a range of 0.53 × 10⁻⁹–3.18 × 10⁻⁹ m²·s⁻¹ and 16.58–68.06 MJ·(kg·h⁻¹)⁻¹, respectively. The findings from the response surface methodology indicated that optimal drying conditions for cooked red beans are achieved at a hot air temperature of 90 °C, a microwave power of 450 W (corresponding to an initial intensity of 2.25 W·g⁻¹), and a rotational speed of 0.2 Hz. These conditions lead to the maximum effective diffusivity coefficient and the lowest specific energy consumption. Further investigations into step-up (150–300 W to 300–450 W) and step-down (300–450 W to 150–300 W) microwave heating modes were conducted to refine the drying process for enhanced energy efficiency. The synthetic evaluation index revealed that step-down microwave heating strategies of 450 W-to-150 W and 300 W-to-150 W, applied at a temperature of 90 °C and a rotational speed of 0.2 Hz, were notably effective. These methods successfully minimized energy use while preserving the quality attributes of the final product, which were comparable to those of traditionally cooked and freeze-dried red beans. The combined approach of hot-air drying with step-down microwave heating presents a promising, energy-saving technique for producing quick-cooking beans that retain their rehydration qualities and texture.

A new process for the production of instant red jasmine rice was investigated using fluidized bed drying with the aid of swirling compressed air. Drying characteristics were evaluated using the operating parameters of fluidizing air temperature (90–120 °C) and pressure of swirling compressed air (4–6 bar). Appropriate air pressure was determined based on the highest value of model parameters from the semi-empirical Page equation and effective diffusivity. Influences of supply time of swirling compressed air (2–10 min) and drying temperature of 90–120 °C were investigated and optimized based on the quality attributes using response surface methodology. Drying at 120 °C and compressed air pressure of 6 bar gave the highest rate constant and effective diffusion coefficient. Drying at 120 °C combined with injecting swirling air for 2 min was the most suitable approach, while drying at 90 °C and supplying compressed air for 10 min was the best choice to preserve antioxidant properties. Air temperature of 98.5 °C with 2 min supply of swirling compressed air suitably provided high physical and rehydration properties and retained high health benefits of antioxidant compounds. Finally, after rehydration in warm water at 70 °C for 10 min, the textural properties of the rehydrated rice sample were comparable to conventionally cooked rice.

Stepwise drying is an effective technique that promotes energy saving without additional capital cost. The stepwise drying mode was investigated for energy consumption and dried product qualities using a coupled heat and mass transfer model associated with kinetics equations of volume shrinkage and degradation of β-carotene in carrot cubes. Simulations were performed using a finite element method with extension of a chemical species transport. Validation experiments were carried out under constant drying modes at 60 °C, 70 °C and 80 °C using a lab-scale convective hot air dryer. The verified models were subsequently employed to investigate the effects of two step-up drying modes (60 to 70 °C and 60 to −80 °C). The optimal drying condition was determined using the synthetic evaluation index (SI) with criteria of high specific moisture evaporation rate (SMER), low shrinkage ratio and β-carotene degradation. Simulated results showed comparable agreement with experimental data of moisture content, shrinkage ratio and β-carotene ratio. Step-up drying of 60 to 70 °C gave the highest SMER of 0.50 × 10⁻³ kg of water evaporated per kWh, while the operation at constant temperature of 80 °C gave the lowest value of 0.19 × 10⁻³ kg of water evaporated per kWh. Model-predicted results showed less shrinkage of carrot cubes, but higher degradation of β-carotene under step-up drying compared to single-stage drying under temperature of 60 °C. Based on the highest SI value (0.36), carrot cubes were optimally dried under step-up mode of 60 to 70 °C.