The thin layers of ZnO and ZnO: Al (Al doped zinc oxide—AZO) were deposited by the atomic deposition layer (ALD) method on silicon and glass substrates. The structures were deposited using diethylzinc (DEZ) and deionized water as zinc and oxygen precursors. A precursor of trimethylaluminum (TMA) was used to introduce the aluminum dopant. The present study of ALD-deposited ZnO and AZO films was motivated by their applications in photovoltaics. We attempted to expose several properties of such films. Structural, optical (including ellipsometric measurements) and electrical investigations were performed. We discussed the relations between samples doped with different Al fractions and their properties.

Flexible and transparent electrodes were fabricated with spray coating technique from paints based on multiwalled carbon nanotubes with the addition of graphene platelets. The work presents the influence of graphene platelets on the paints rheology and layers morphology, which has a strong connection to the electrooptical parameters of the electrodes. The paints rheology affects the atomization during spray coating and later the leveling of the coating on the substrate. Both technological aspects shape the morphology of the electrode and the distribution of nanoparticles in the coating. All these factors influence the sheet resistance and roughness, which is linked to the optical transmission and absorbance. In our research the electrode was applied as a transparent and elastic heating element with 68% optical transmission at 550 nm wavelength and 8.4 kΩ/□ sheet resistance. The elastic heating element was tested with a thermal camera at the 3 diverse supply voltages −20, 30, and 60 VDC. The test successfully confirmed and supported our proposed uses of elaborated electrodes.