Anesu Nyabadza

Mr. Anesu Nyabadza

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 September 2023 in Advances in Colloid and Interface Science
Verified
Journal Article
Open access
ANAnesu Nyabadza
Anesu Nyabadza
ÉMÉanna McCarthy
Éanna McCarthy
MMMayur Makhesana
Mayur Makhesana
SHSaeid Heidarinassab
Saeid Heidarinassab
APAnouk Plouze
Anouk Plouze
DBDermot Brabazon
Dermot Brabazon
This article provides an in-depth analysis of various fabrication methods of bimetallic nanoparticles (BNP), including chemical, biological, and physical techniques. The review explores BNP's diverse uses, from well-known applications such as sensing water treatment and biomedical uses to less-studied areas like breath sensing for diabetes monitoring and hydrogen storage. It cites results from over 1000 researchers worldwide and >300 peer-reviewed articles. Additionally, the article discusses current trends, actionable recommendations, and the importance of synthetic analysis for industry players looking to optimize manufacturing techniques for specific applications. The article also evaluates the pros and cons of various fabrication methods, highlighting the potential of plant extract synthesis for mass production of capped BNPs. However, it warns that this method may not be suitable for certain applications requiring ligand-free surfaces. In contrast, physical methods like laser ablation offer better control and reactivity, especially for applications where ligand-free surfaces are critical. The report underscores the environmental benefits of plant extract synthesis compared to chemical methods that use hazardous chemicals and pose risks to extraction, production, and disposal. The article emphasizes the need for life cycle assessment (LCA) articles in the literature, given the growing volume of research on nanotechnology materials. This article caters to researchers at all stages and applies to various fields applying nanomaterials.

1 February 2023 in Crystals
Verified
Journal Article
Open access
PDF file
ANAnesu Nyabadza
Anesu Nyabadza
MVMercedes Vazquez
Mercedes Vazquez
DBDermot Brabazon
Dermot Brabazon
Pulsed laser ablation in liquid (PLAL) is a physical and top-down approach used to fabricate nanoparticles (NPs). Herein, the research methods and current trends in PLAL literature are reviewed, including the recent uses of PLAL for fabricating bimetallic nanoparticles (BNPs) and composites. BNPs have gained attention owing to their advanced physicochemical properties over monometallic NPs. PLAL involves the irradiation of a solid target (usually a rod, plate, or thin film) under a liquid medium. The liquid collects the ejected NPs resulting from the laser processing, which produces a colloid that can be in various applications, including plasmon sensing, energy harvesting, and drug delivery. The most used fabrication techniques, including the use of microorganisms, do not have precise NP size control and require the separation of the microorganisms from the produced NPs. PLAL is quicker at producing NPs than bottom-up methods. The drawbacks of PLAL include the need to find the required laser processing parameters, which requires extensive experimentation, and the complex and non-linear relationships between the inputs and the outputs (e.g., NP size).

15 September 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
ANAnesu Nyabadza
Anesu Nyabadza
Mercedes VázquezMercedes Vázquez
Mercedes Vázquez
SCShirley Coyle
Shirley Coyle
BFBrian Fitzpatrick
Brian Fitzpatrick
Dermot BrabazonDermot Brabazon
Dermot Brabazon
The use of flexible sensors has tripled over the last decade due to the increased demand in various fields including health monitoring, food packaging, electronic skins and soft robotics. Flexible sensors have the ability to be bent and stretched during use and can still maintain their electrical and mechanical properties. This gives them an advantage over rigid sensors that lose their sensitivity when subject to bending. Advancements in 3D printing have enabled the development of tailored flexible sensors. Various additive manufacturing methods are being used to develop these sensors including inkjet printing, aerosol jet printing, fused deposition modelling, direct ink writing, selective laser melting and others. Hydrogels have gained much attention in the literature due to their self-healing and shape transforming. Self-healing enables the sensor to recover from damages such as cracks and cuts incurred during use, and this enables the sensor to have a longer operating life and stability. Various polymers are used as substrates on which the sensing material is placed. Polymers including polydimethylsiloxane, Poly(N-isopropylacrylamide) and polyvinyl acetate are extensively used in flexible sensors. The most widely used nanomaterials in flexible sensors are carbon and silver due to their excellent electrical properties. This review gives an overview of various types of flexible sensors (including temperature, pressure and chemical sensors), paying particular attention to the application areas and the corresponding characteristics/properties of interest required for such. Current advances/trends in the field including 3D printing, novel nanomaterials and responsive polymers, and self-healable sensors and wearables will also be discussed in more detail.

19 November 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
ANAnesu Nyabadza
Anesu Nyabadza
Mercedes VázquezMercedes Vázquez
Mercedes Vázquez
SCShirley Coyle
Shirley Coyle
BFBrian Fitzpatrick
Brian Fitzpatrick
Dermot BrabazonDermot Brabazon
Dermot Brabazon
Magnesium nanoparticles of various mean diameters (53–239 nm) were synthesised in this study via pulsed laser ablation in liquid (PLAL) from millimetre sized magnesium powders within isopropyl alcohol. It was observed via a 3 × 3 full factorial design of experiments that the processing parameters can control the nanoparticle distribution to produce three size-distribution types (bimodal, skewed and normal). Ablation times of 2, 5, and 25 min where investigated. An ablation time of 2 min produced a bimodal distribution with the other types seen at higher periods of processing. Mg nanoparticle Ultraviolet–Visible spectroscopy (UV–Vis) absorbance at 204 nm increased linearly with increasing ablation time, indicating an increase in nanoparticle count. The colloidal density (mg/mL) generally increased with increasing nanoparticle mean diameter as noted via increasing UV–Vis absorbance. High laser scan speeds (within the studied range of 3000–3500 mm/s) tend to increase the nanoparticle count/yield. For the first time, the effect of scan speed on colloidal density, UV–Vis absorbance and nanoparticle diameter from metallic powder ablation was investigated and is reported herein. The nanoparticles formed dendritic structures after being drop cast on aluminium foil as observed via field emission scanning electron microscope analysis. Dynamic light scattering was used to measure the size of the nanoparticles. Magnesium nanoparticle inks show promise for use in the fabrication conductive tracks or thermal insulation in electronics.

1 January 2024 in Results in Engineering
Verified
Journal Article
Open access
ANAnesu Nyabadza
Anesu Nyabadza
LDLouis Michael Mc Donough
Louis Michael Mc Donough
AMArul Manikandan
Arul Manikandan
ARAbhishek Basu Ray
Abhishek Basu Ray
APAnouk Plouze
Anouk Plouze
DBDermot Brabazon
Dermot Brabazon

3 June 2025 in Chemical Engineering Journal Advances
Verified
Journal Article
Open access
ANAnesu Nyabadza
Anesu Nyabadza
ATAchu Titus
Achu Titus
MMMayur Makhesana
Mayur Makhesana
BFBlánaid Fogarty
Blánaid Fogarty
MKMandana Kariminejad
Mandana Kariminejad
DBDermot Brabazon
Dermot Brabazon