Cement Grouted Bituminous Mix (CGBM) is a composite material, in which air voids present in the bituminous mix are grouted with a cementitious material. The main aim of this study is to develop and evaluate CGBM in the laboratory and field. A conventional dense graded Bituminous Concrete (BC) mix is also considered for comparison. This paper presents the details of different investigations carried out for evaluation of CGBM mix for properties such as Indirect Tensile Strength (ITS), Resilient Modulus and Dynamic Modulus at different temperatures. Performance characteristics such as rutting, fracture energy, moisture resistance, oil spillage and durability were also evaluated for the mixes. A CGBM test section has been laid on site and is being monitored for its performance. Results show that CGBM has better ITS, Resilient Modulus, Dynamic Modulus, and Rutting performance than a conventional bituminous mix. It shows a slight reduction in durability and crack resistance due to the relative brittleness of the hardened cement constituent but within acceptable limits. The material is also more resistant to damage by moisture and diesel. CGBM mixes are less temperature susceptible compared to conventional bituminous mix. Dynamic Modulus and Phase Angle master curves for CGBM mixes have been developed in the study. Full depth grouting was observed in field core samples and Micro Computed Tomography (Micro-CT) tests were carried out to check the air voids connectivity and their content in the CGBM mix.
1 August 2018 in Journal of Materials in Civil Engineering
Many of the recycled asphalt pavement (RAP) mix design methods assume 100% blending of the RAP binder with virgin binder to estimate the properties of the binder in the RAP mix. However, 100% blending is not practically achieved. Thus, it is essential to have procedures for determination of the degree of blending so that the properties of the blend can be estimated more accurately from the properties of RAP and virgin binders. To achieve this objective, a detailed study is conducted to evaluate the level of interaction between RAP and virgin binders. This study considers two proportions of RAP (20 and 35%) and two viscosity grades of virgin binders (VG10 and VG30). The difference in the qualities of the binders in the RAP and virgin aggregate portions is evaluated in terms of different binder properties such as , penetration, and softening point. The results show that the grade of virgin binder and RAP content in the hot mix asphalt concrete governs the degree of blending achieved. Based on the results of the study, a simple approach is proposed for estimation of the properties of the combined (blended) binder in the recycled mix.
This paper presents the details of a laboratory study on the evaluation of the fatigue characteristics of asphalt mixtures containing Recycled Asphalt Pavement (RAP) material using controlled stress indirect tensile fatigue test (ITFT). The effect of different aggregate gradations on the fatigue performance of RAP mixes is the main focus of the study as this helps us to identify the proportion of RAP that can be used from fatigue performance consideration. Two dense mixes and three gap graded mixes, both with different percentages of RAP, were investigated. VG 30 viscosity grade virgin binder was used. The fatigue test was conducted at 25°C. Laboratory fatigue life determined under stress controlled mode increased with increase in the RAP content for all the five aggregate gradations. The corresponding ‘Initial strain vs fatigue life’ trends suggest a decrease (for any specific strain level) in the fatigue life with an increase in the RAP content. However, analysis of the fatigue performance of typical pavement sections with different RAP contents do not suggest any significant detrimental effect of increasing the RAP content for pavements with thick bituminous layers. Use of open graded mixes permits the use of larger binder contents and higher RAP contents in the mix. Fatigue lives of RAP mixes are longer for gap graded mixes compared to dense graded mixes. The fatigue lives of RAP mixes are found to correlate very well with fatigue parameters of the virgin-RAP binder blends prepared in suitable proportions.
27 September 2024 in Construction and Building Materials