The superconducting nanowire single-photon detector (SNSPD) is used to detect the sunlight reflected by the artificial satellite and space debris. In the process, light curves of the satellite and space debris are successfully measured. In 2017, a space-debris laser ranging system with a four-element SNSPD is developed by Yunnan Observatories in China. During the ranging experiments, the detector works in a freely detecting state. It can detect photons not only of the laser echo, but also of the sunlight reflected by the target. After separating the data triggered by background light from the whole detected data set, the light curves of satellites, including Topex and several types of debris, are acquired. The apparent rotation rate of the satellite Topex is determined by analyzing the light curves by Fourier transform and phase dispersion minimization. On the basis of a laser ranging system using SNSPDs, the simultaneous measurement of the laser ranging and light curves of some space targets without any additional equipment is realized for the first time, to the best of our knowledge.

Precise knowledge of the phase center location of the global navigation satellite system (GNSS) antenna is a prerequisite for precise orbit determination (POD) of the low Earth orbit (LEO) satellite. The phase center offset (PCO) and phase center variation (PCV) values for the LEO antenna obtained from ground calibration cannot reflect the error sources encountered in the actual spacecraft environment. PCV corrections are estimated by ionosphere free (IF) carrier phase post-fit residuals of reduced dynamic orbit determination. Ambiguity resolution (AR) plays a crucial role in achieving the best orbit accuracy. The single receiver AR concept is realized using wide-lane (WL) and narrow-lane (NL) bias products. Single difference (SD) observations between satellites are applied to remove the receiver dependent phase bias. SD AR and traditional double difference (DD) AR methods are applied to fix the ambiguities. The recovered SD and DD IF ambiguities are taken as pseudo-observations to constrain the undifferenced IF ambiguity parameters in the POD process. The LEO orbits based on float ambiguity (FA), SD, AR, and DD AR are investigated. One year’s data collected by the Gravity Recovery And Climate Experiment Follow-On (GRACE-FO) mission and GPS precise products provided by the Center for Orbit Determination in Europe (CODE) were analyzed. Precise orbit generated by the Jet Propulsion Laboratory (JPL), independent satellite laser ranging (SLR), and K-band ranging (KBR) measurements were utilized to assess the orbit accuracy. More than 98% of SD WL and 95% of SD NL ambiguities are fixed, which confirms the good quality of the bias products and correctness of the SD AR method. With PCV corrections, the average phase residuals of DD and SD AR solutions are 0.13 and 0.41 mm, which indicates improved consistency between applied models and observations. Compared with JPL’s orbit, the SD AR orbits achieve the accuracy of 6.0, 6.2, and 5.1 mm in along-track, cross-track, and radial directions. The SD AR solutions show an average improvement of 18.3% related to the FA orbits while 6.3% is gained by the DD AR approach. The root mean squares (RMSs) of SLR residuals for FA, DD AR, and SD AR solutions are 11.5, 10.2, and 9.6 mm, which validate the positive effect of AR on POD. Standard deviation (STD) of KBR residuals for SD AR orbits is 1.8 mm while 0.9 mm is achieved by the DD AR method. The explanation is that the phase bias products used for SD AR are not free of errors and the errors may degrade the KBR validation. In-flight PCV calibration and ambiguity resolution improve the LEO orbit accuracy effectively.

This paper provides a comprehensive overview of the development of Lunar Laser Ranging (LLR), covering key components such as ground observatories, lunar retro-reflectors, and data formats. The paper details the evolution of LLR experiments conducted by some major world-class observatories, with a particular focus on addressing critical issues associated with LLR technology. Additionally, the article highlights the latest advancements in the field, elucidating scientific achievements derived from LLR data, including its contributions to gravitational theory, Earth Orientation Parameters, lunar physics exploration, and lunar librations. The review summarizes new challenges in LLR modeling and concludes with prospects for the future development of LLR.

This paper introduces a novel dynamical model, building upon the existing dynamical model for Deimos in the current numerical ephemerides, which only encompasses the simple libration effects of Deimos. The study comprehensively incorporates the rotational dynamics of Deimos influenced by the torque exerted by the major celestial bodies (Mars, the Sun) in the solar system within the inertial space. Consequently, a full dynamical model is formulated to account for the complete coupling between the rotation and orbit of Deimos. Simultaneously, employing precision orbit determination methods used for artificial satellites, we develop an adjustment model for fitting data to the complete model. The 12-order Adams–Bashforth–Moulton (ABM) integration algorithm is employed to synchronously integrate the 12 state variables of the full model to obtain the orbit of Deimos.The difference in the orbits obtained by integrating the full model over a period of 10 years and those obtained by the simplified model is at the order of 10 km. After precise orbit determination, this difference decreases to below 100 m, so numerical simulation results indicate that the full dynamical model and adjustment model are stable and reliable. Simultaneously, the integration of the Deimos third-order gravity field in the full model over a 10-year period induces only meter-level positional changes. This suggests that when constructing the complete model, the utilization of a second-order gravity field alone is sufficient. Compared to the simple model, the polar axis of Deimos in the inertial space exhibits a more complex oscillation in the full model. Additionally, the full model calculates that the minimum moment of inertia principal axis of Phobos has an amplitude of approximately 0.5 degrees in the longitude direction and does not exceed 2 degrees in the latitude direction. This work further advances the current dynamical model for Deimos and establishes the foundational model for the generation of a new set of precise numerical ephemerides for Deimos.

This paper primarily investigates the effect of the tilt of corner cube reflector (CCR) arrays on lunar laser ranging (LLR). A mathematical model was established to study the random errors caused by the tilt of the CCR arrays. The study found that, ideally, when the laser ranging pulse width is 10 picoseconds or less, it is possible to distinguish from which specific corner cubes within the CCR array each peak in the echo signal originates. Consequently, partial data from the echo can be extracted for signal processing, significantly reducing random errors and improving the single-shot precision of LLR. The distance obtained by extracting part of the echo can be reduced to the center position of the array, thereby providing multiple higher-precision ranging results from each measurement. This not only improves the precision of LLR but also increases the data volume. A simulation experiment based on the 1.2 m laser ranging system at Yunnan Observatories was conducted. By extracting one peak for signal processing, the single-shot precision improved from 32.24 mm to 2.52 mm, validating the theoretical analysis results. Finally, an experimental laser ranging system based on a 53 cm binocular telescope system was established for ground experiments. The experimental results indicated that the echo signal could identify the tilt state of the CCR array. By extracting the peak returned by the central CCR for signal processing, the ranging precision was greatly improved. Through theoretical analyses, simulation experiments, and ground experiments, a solution to reduce the random errors caused by the tilt of the CCR array was provided. This offers an approach to enhance the single-shot precision of future LLR and provides a reference for upgrading ground-based equipment at future laser ranging stations.