The objective of this work was to evaluate the photocatalytic activity of zinc oxide catalysts supported on natural zeolite clinoptilolite for photocatalytic degradation of the drug hydroxychloroquine, used in the treatment of malaria and which has been tested in the treatment of COVID-19. To synthesize 10%ZnOCP and 15%ZnOCP catalysts, the wet impregnation methodology was used. The raw and synthesized catalysts were characterized by XRD, SEM, XRF, BET, DRS, PCZ, FT-IR and PL. The degradation of hydroxychloroquine was calculated using UV-vis absorption from the samples before and after the photocatalytic process. The maximum percentage of degradation (96%) was obtained with the operational parameters of C0 = 10 mg L−1; Ccat = 2 g L−1 of 15%ZnOCP; pH = 7.5; UV-A radiation. Ecotoxicological tests against the bioindicators Lactuca sativa and Artemia salina confirmed the reduction of effluent toxicity after treatment.

Plinia cauliflora (Mart.) Kausel, popularly known as jabuticaba, possesses bioactive compounds such as flavonoids, tannins, and phenolic acids, known for their antioxidant, antibacterial, wound healing, and cardioprotective effects. Therefore, this study aimed to standardize the P. cauliflora fruit peel extraction method, maximize phenolic constituents, and evaluate their antioxidative and antimicrobial effects. Various extraction methods, including vortex extraction with and without precipitation at 25, 40, and 80 °C, and infusion extraction with and without precipitation, were performed using a completely randomized design. Extraction without precipitation (E − P) showed the highest yield (57.9%). However, the precipitated extraction (E + P) method displayed a yield of 45.9%, higher levels of phenolic derivatives, and enhanced antioxidant capacity. Major compounds, such as D-psicose, D-glucose, and citric acid, were identified through gas chromatography–mass spectrometry (GC-MS) analysis. Ultra-high-performance liquid chromatography–tandem mass spectrometry (UHPLC-MS/MS) analysis identified citric acid, hexose, flavonoids, tannins, and quercetin as the major compounds in the extracts. Furthermore, the extracts exhibited inhibitory effects against Bacillus subtilis, Staphylococcus aureus, Pseudomonas aeruginosa, and Escherichia coli bacteria. In conclusion, the E + P method efficiently obtained extracts with high content of bioactive compounds showing antioxidant and antimicrobial capacities with potential application as a dietary supplement.

Catalytic studies hydrogen production via steam reforming of ethanol (SRE) are essential for process optimization. Likewise, selecting the ideal support for the active phase can be critical to achieve high conversion rates during the catalytic steam reforming process. In this work, copper-based catalysts were synthesized using two different supports, NaY zeolite and Nb₂O₅/Al₂O₃ mixed oxides. The materials were prepared using wet impregnation and characterized for their physicochemical properties using different analytical techniques. Differences in the catalyst morphologies were readily attributed to the characteristics of the support. The Cu/NaY catalyst exhibited a higher specific surface area (210.40 m² g⁻¹) compared to the Cu/Nb₂O₅/Al₂O₃ catalyst (26.00 m² g⁻¹), resulting in a homogeneous metal dispersion over the support surface. The obtained results showed that, at 300 °C, both the Cu/Nb₂O₅/Al₂O₃ and Cu/NaY catalysts produced approximately 50% hydrogen and 40% acetaldehyde, but with significant differences in conversion (6% and 56%, respectively). At 450 °C, a greater product distribution and a 10% higher conversion were observed when the catalyst was supported on NaY compared to Nb₂O₅/Al₂O₃. Hence, the performance of copper-based catalysts was influenced significantly by the textural properties of the support.