In today’s world, global warming has become a concern. To overcome this, we need to reduce the carbon footprints caused by the production of materials. Much of the time, this is equivalent to the same amount of CO2 emissions per tonne of production. This is a serious concern and needs to be overcome by identifying alternative materials to have as minimal a carbon footprint as possible. In this context, hemp fiber is by far the best natural fiber when compared to its peers. As per the survey conducted by the Nova institute, hemp has CO2 emissions of only 360 Kg/tonne, whereas jute has CO2 emissions of 550 Kg/tonne, kenaf 420 Kg/tonne, and flax 350 Kg/tonne. This paper presents an experimental study of the fracture toughness of hemp-reinforced hybrid composites (HRHC). The effect of the parameters on the fracture toughness behavior of HRHC is studied using the Taguchi technique. It uses different filler combinations with hemp fiber and epoxy. Hemp fiber is used as the reinforcement, epoxy resin is used as a matrix, and banana fiber, coconut shell powder, and sawdust are used as fillers. The experimental plan is prepared using an orthogonal array and analyzed using Minitab software. The obtained results were analyzed using ANOVA and main effects plots. It was observed that the fracture toughness increases with a decrease in thickness. The fracture toughness is affected by the fiber content in the range of 25%–35% and is also affected by the filler materials.
The continuous use of materials with metal matrix like mild steel, aluminium and other non-renewable materials are depleting which are not cost effective. Hence Natural fibres are considered as new emerging eco friendly materials as they are renewable, cost effective, light weight, eco friendly and biodegradable. Composites by name is a combination of many materials made of different reinforcing agents and matrix, are considered more useful because they have better strength and stiffness values, light in weight and strength to weight, strength to stiffness ratios are much higher compared to steel or aluminium metals and with these composites it is more feasible to achieve various combinations of different properties which is found to be difficult to achieve with those of metals, ceramics or polymers. The project is carried out to fabricate natural fibre reinforced hybrid composites and is tested for various mechanical properties through fracture toughness testing and tensile testing, analysed using tools like DOE and RSM. The specimens are tested and analysed and is found that it has similar mechanical properties of any synthetic fibres and can replace them.
12 October 2025 in Fracture and Structural Integrity
The hydrophilic nature of bamboo fiber makes them prone to moisture uptake and subsequent property degradation. In this study, bamboo fiber–epoxy composites were hybridized with clamshell-derived particulate fillers to mitigate the adverse effect of moisture absorption and enhance performance. Composites with 0, 3, 6, and 9 wt% filler were fabricated via compression molding technique. Moisture absorption and its influence on tensile and flexural strength were evaluated following ASTM standards. Results revealed that unfilled composites exhibited highest water uptake and severe strength loss upon moisture exposure, whereas filler addition reduced water uptake and improved strength retention. The 6 wt% filler showed optimal performance with 30.4% reduction in water uptake, 67.5% retention of tensile strength, and 70% retention of flexural strength. Fractography analysis confirmed the role of filler acting as a barrier against moisture ingress and restricting interfacial degradation.
1 July 2015 in Journal of Engineering Education Transformations