Ali Al-Shathr

Dr. Ali Al-Shathr

University of Technology- Iraq, Baghdad, Baghdād, Iraq
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 July 2023 in Catalysts
Verified
Journal Article
Open access
PDF file
NANisreen S. Ali
Nisreen S. Ali
ISIssam K. Salih
Issam K. Salih
Hamed Nasser HarharahHamed Nasser Harharah
Hamed Nasser Harharah
HMHasan Majdi
Hasan Majdi
HSHussein G. Salih
Hussein G. Salih
Sohrab ZENDEHBOUDISohrab ZENDEHBOUDI
Sohrab ZENDEHBOUDI
The use of catalytic membranes as microstructured reactors without a separative function has proved effective. High catalytic activity is possible with minimal mass transport resistances if the reactant mixture is pushed to flow through the pores of a membrane that has been impregnated with catalyst. In this study, n-heptane (C7H16) was hydrocracked and hydro-isomerized within a plug-flow zeolitic catalytic membrane-packed bed reactor. The metallic cobalt (Co) precursor at 3 wt.% was loaded onto support mesoporous materials MCM-48 to synthesize heterogeneous catalysis. The prepared MCM-48 was characterized by utilizing characterization techniques such as scanning electron microscopy (SEM), X-ray diffraction (XRD), energy dispersive X-ray analysis (EDAX), Fourier transform infrared (FTIR), nitrogen adsorption–desorption isotherms, and the Brunauer–Emmett–Teller (BET) surface area. The structural and textural characteristics of MCM-48 after encapsulation with Co were also investigated. The analyses were performed before and after metal loading. According to the results, the 3 wt.% Co/MCM-48 of metallic catalyst in a fixed bed membrane reactor (MR) appears to have an excellent catalytic activity of ~83% during converting C7H16 at 400 °C, whereas a maximum selectivity was approximately ~65% at 325 °C. According to our findings, the synthesized catalyst exhibits an acceptable selectivity to isomers with multiple branches, while making low aromatic components. In addition, a good catalytic stability was noticed for this catalyst over the reaction. Use of 3 wt.% Co/MCM-48 catalyst led to the highest isomerization selectivity as well as n-heptane conversion. Therefore, the heterogeneous catalysis MCM-48 is a promising option/ alternative for traditional hydrocracking and hydro-isomerization processes.

7 November 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
Noor H. JawadNoor H. Jawad
Noor H. Jawad
Ali Amer YahyaAli Amer Yahya
Ali Amer Yahya
Ali Al-ShathrAli Al-Shathr
Ali Al-Shathr
HSHussein G. Salih
Hussein G. Salih
Khalid Turki RashidKhalid Turki Rashid
Khalid Turki Rashid
Qusay F. AlsalhyQusay F. Alsalhy
Qusay F. Alsalhy
Fuel cells have lately received growing attention since they allow the use of non-precious metals as catalysts, which reduce the cost per kilowatt of power in fuel cell devices to some extent. Until recent years, the major barrier in the development of fuel cells was the obtainability of highly conductive anion exchange membranes (AEMs). On the other hand, improvements show that newly enhanced anion exchange membranes have already reached high conductivity levels, leading to the suitable presentation of the cell. Currently, an increasing number of studies have described the performance results of fuel cells. Much of the literature reporting cell performance is founded on hydrogen‒anion exchange membrane fuel cells (AEMFCs), though a growing number of studies have also reported utilizing fuels other than hydrogen—such as alcohols, non-alcohol C-based fuels, and N-based fuels. This article reviews the types, performance, utilized membranes, and operational conditions of anion exchange membranes for fuel cells.

26 August 2021 in Catalysts
Verified
Journal Article
Open access
PDF file
Ali Al-ShathrAli Al-Shathr
Ali Al-Shathr
ZSZaidoon Shakor
Zaidoon Shakor
HMHasan Majdi
Hasan Majdi
AAAdnan A. AbdulRazak
Adnan A. AbdulRazak
Talib M. AlbayatiTalib M. Albayati
Talib M. Albayati
In this study, an artificial neural network (ANN) model was developed and compared with a rigorous mathematical model (RMM) to estimate the performance of an industrial heavy naphtha reforming process. The ANN model, represented by a multilayer feed forward neural network (MFFNN), had (36-10-10-10-34) topology, while the RMM involved solving 34 ordinary differential equations (ODEs) (32 mass balance, 1 heat balance and 1 momentum balance) to predict compositions, temperature, and pressure distributions within the reforming process. All computations and predictions were performed using MATLAB® software version 2015a. The ANN topology had minimum MSE when the number of hidden layers, number of neurons in the hidden layer, and the number of training epochs were 3, 10, and 100,000, respectively. Extensive error analysis between the experimental data and the predicted values were conducted using the following error functions: coefficient of determination (R2), mean absolute error (MAE), mean relative error (MRE), and mean square error (MSE). The results revealed that the ANN (R2 = 0.9403, MAE = 0.0062) simulated the industrial heavy naphtha reforming process slightly better than the rigorous mathematical model (R2 = 0.9318, MAE = 0.007). Moreover, the computational time was obviously reduced from 120 s for the RMM to 18.3 s for the ANN. However, one disadvantage of the ANN model is that it cannot be used to predict the process performance in the internal points of reactors, while the RMM predicted the internal temperatures, pressures and weight fractions very well.

19 July 2023 in Catalysts
Verified
Journal Article
Open access
PDF file
BABashir Yousif Al-Zaidi
Bashir Yousif Al-Zaidi
Ali Al-ShathrAli Al-Shathr
Ali Al-Shathr
ASAmal K. Shehab
Amal K. Shehab
ZSZaidoon Shakor
Zaidoon Shakor
HMHasan Majdi
Hasan Majdi
James McGregorJames McGregor
James McGregor
In this paper, the focus is on upgrading the value of naphtha compounds represented by n-heptane (n-C7H16) with zero octane number using a commercial zeolite catalyst consisting of a mixture of 75% HY and 25% HZSM-5 loaded with different amounts, 0.25 to 1 wt.%, of platinum metal. Hydrocracking and hydroisomerisation processes are experimentally and theoretically studied in the temperature range of 300–400 °C and under various contact times. A feedforward artificial neural network (FFANN) based on two hidden layers was used for the purpose of process modelling. A total of 80% of the experimental results was used to train the artificial neural network, with the remaining results being used for evaluation and testing of the network. Tan-sigmoid and log-sigmoid transfer functions were used in the first and second hidden layers, respectively. The optimum number of neurons in hidden layers was determined depending on minimising the mean absolute error (MAE). The best ANN model, represented by the multilayer FFANN, had a 4–24–24–12 topology. The ANN model accurately simulates the process in which the correlation coefficient (R2) was found to be 0.9918, 0.9492, and 0.9426 for training, validation, and testing, respectively, and an average of 0.9767 for all data. In addition, the operating conditions of the process were optimised using the genetic algorithm (GA) towards increasing the octane number of the products. MATLAB® Version 2020a was utilised to complete all required computations and predictions. Optimal operating conditions were found through the theoretical study: 0.85 wt.% Pt-metal loaded, 359.36 °C, 6.562 H2/n-heptane feed ratio, and 3.409 h−1 weight-hourly space velocity (WHSV), through which the maximum octane number (RON) of 106.84 was obtained. Finally, those operating conditions largely matched what was calculated from the results of the experimental study, where the highest percentage of the resulting isomers was found with about 78.7 mol% on the surface of the catalyst loaded with 0.75 wt.% Pt-metal at 350 °C using a feed ratio of 6.5 H2/n-C7 and WHSV of 2.98 h−1.

13 November 2024 in Reactions
Verified
Journal Article
Open access
PDF file
ساسماء السلطان
سماء السلطان
Ali Al-ShathrAli Al-Shathr
Ali Al-Shathr
BABashir Yousif Al-Zaidi
Bashir Yousif Al-Zaidi
The alkylation reaction of aromatic compounds gains considerable attention because of its wide application in bulk and fine chemical production. Aromatics alkylated with olefins is a well-known process, particularly for linear alkylbenzene, phenyloctanes, and heptyltoluene production. As octane boosters and precursors for various petrochemical and bulk chemical products, a wide range of alkylated compounds are in high demand. Numerous unique structures have been proposed in addition to the usual zeolites (Y and beta) utilized in alkylation procedures. The inevitable deactivation of industrial catalysts over time on stream, which is followed by a decrease in catalytic activity and product selectivity, is one of their disadvantages. Therefore, careful consideration of catalyst deactivation regarding the setup and functioning of the process of catalysis is necessary. Although a lot of work has been carried out to date to prevent coke and increase catalyst lifespan, deactivation of the catalyst is still unavoidable. Coke deposition can lead to catalyst deactivation in industrial catalytic processes by obstructing pores and/or covering acid sites. It is very desirable to regenerate inactive catalysts in order to remove the coke and restore catalytic activity at the same time. Depending on the kind of catalyst, the deactivation processes, and the regeneration settings, each regeneration approach has pros and cons. In this comprehensive study, the focus was on discussing the reaction mechanism of 1-octene isomerization and toluene alkylation as an example of isomerization and alkylation reactions that occur simultaneously, shedding light in detail on the catalysts used for this type of complex reaction, taking into account the challenges facing the catalyst deactivation and reactivation procedures.

1 December 2023 in Chemengineering
Verified
Journal Article
Open access
PDF file
MKMohammed Khalil
Mohammed Khalil
BABashir Yousif Al-Zaidi
Bashir Yousif Al-Zaidi
ZSZaidoon Shakor
Zaidoon Shakor
SHSattar Jalil Hussein
Sattar Jalil Hussein
Ali Al-ShathrAli Al-Shathr
Ali Al-Shathr
In this study, a mono-functional ZrO2 nanomaterial was treated with sulfur and loaded with two different percentages of platinum metals (i.e., 0.5 and 1 wt%) to generate an acidic bi-functional Pt/SZrO2 nanocatalyst for the purpose of increasing the catalytic activity and selectivity together. This work aims to determine the least amount of the costly platinum metal that can be added to the catalyst to achieve the appropriate balance between the acidic and metallic sites. Both rapid deactivation of the super-acid nanaocatalyst and fast cleavage of the zero-octane n-heptane chain can consequently be prevented throughout the reaction. This can be achieved by accelerating the hydroisomerization reactions at a pressure of 5 bar to reach the highest selectivity towards producing the desired multi-branched compound in fuel. Several characterization techniques, including XRD, SEM, EDX, BET, and FTIR, have been used to evaluate the physical properties of the catalysts. The best reaction product was obtained at 230 °C compared to the other tested temperatures. The conversion, selectivity, and yield of reaction products over the surfaces of the prepared catalysts followed this order: 0.5 wt% Pt/SZrO2 > 1 wt% Pt/SZrO2 > 0.5 wt% Pt/ZrO2 > 1 wt% Pt/ZrO2 > SZrO2 > ZrO2. The highest conversion, selectivity, and yield values were obtained on the surface of the 0.5 wt% Pt/SZrO2 catalyst, which are 69.64, 81.4 and 56.68 wt%, respectively, while the lowest values were obtained on the surface of the parent ZrO2 catalyst, which are 43.9, 61.1 and 26.82, respectively. The kinetic model and apparent activation energies were also implemented for each of the hydroisomerization, hydrogenation/dehydrogenation, and hydrocracking reactions, which track the following order: hydroisomerization < hydrogenation/dehydrogenation < hydrocracking. The lowest apparent activation energy value of 123.39 kJ/mol was found on the surface of the most active and selective 0.5% Pt/SZrO2 nanocatalyst.