In this work, the conversion of waste polypropylene to alternative fuels (liquid and gas) was performed through non-catalytic thermal and catalytic hydrocracking over NiMo/Al2O3 and Pt/Al2O3 catalysts. The process was carried out in an autoclave batch reactor at a temperature of 450 °C and a pressure of 20 bar, which were selected based on experimental optimization. The spent catalyst was also successfully regenerated at 700 °C under a hot airflow. Experiments were conducted to determine the optimum conditions to completely separate the deactivated catalyst from the solid residue easily. The regenerated catalyst was reused to facilitate the economic cost reduction of the process. The reactivated catalysts have almost the same catalytic properties as the fresh catalysts; this was confirmed by several characterization techniques, such as TGA, XRD, SEM, EDX, BET and FTIR. The produced liquids/gases were quantified and classified into their fractions by the number of carbon atoms and gasoline to diesel ratio using GC/MS. The viscosity, density, API gravity, pour point and flash point of oil cuts were also investigated to evaluate the quality of the resulting liquid from the reactions. The NiMo/Al2O3 catalyst gave the highest liquid hydrocarbons yield of 86 wt%, while the highest weight products of gasoline range hydrocarbon fractions of 49.85 wt% were found over the Pt/Al2O3 catalyst. Almost the same catalytic behavior was found with the regenerated catalysts compared to the fresh catalysts. However, the highest gaseous products at 20.8 wt% were found in the non-catalytic thermal products with an increase in the diesel fuel range of 80.83 wt%. The kinetic model was implemented using six lumps and fifteen reactions, and the apparent activation energies for the gasoline and diesel fractions were calculated. In general, all primary and secondary reactions show greater activation energy values on the Pt/Al2O3 catalyst than on the NiMo/Al2O3 catalyst.
In this paper, the focus is on upgrading the value of naphtha compounds represented by n-heptane (n-C7H16) with zero octane number using a commercial zeolite catalyst consisting of a mixture of 75% HY and 25% HZSM-5 loaded with different amounts, 0.25 to 1 wt.%, of platinum metal. Hydrocracking and hydroisomerisation processes are experimentally and theoretically studied in the temperature range of 300–400 °C and under various contact times. A feedforward artificial neural network (FFANN) based on two hidden layers was used for the purpose of process modelling. A total of 80% of the experimental results was used to train the artificial neural network, with the remaining results being used for evaluation and testing of the network. Tan-sigmoid and log-sigmoid transfer functions were used in the first and second hidden layers, respectively. The optimum number of neurons in hidden layers was determined depending on minimising the mean absolute error (MAE). The best ANN model, represented by the multilayer FFANN, had a 4–24–24–12 topology. The ANN model accurately simulates the process in which the correlation coefficient (R2) was found to be 0.9918, 0.9492, and 0.9426 for training, validation, and testing, respectively, and an average of 0.9767 for all data. In addition, the operating conditions of the process were optimised using the genetic algorithm (GA) towards increasing the octane number of the products. MATLAB® Version 2020a was utilised to complete all required computations and predictions. Optimal operating conditions were found through the theoretical study: 0.85 wt.% Pt-metal loaded, 359.36 °C, 6.562 H2/n-heptane feed ratio, and 3.409 h−1 weight-hourly space velocity (WHSV), through which the maximum octane number (RON) of 106.84 was obtained. Finally, those operating conditions largely matched what was calculated from the results of the experimental study, where the highest percentage of the resulting isomers was found with about 78.7 mol% on the surface of the catalyst loaded with 0.75 wt.% Pt-metal at 350 °C using a feed ratio of 6.5 H2/n-C7 and WHSV of 2.98 h−1.
Incorporating a second metal into the monometallic bifunctional catalyst structure results in appearance of new catalytic characteristics and increase in the catalytic productivity. This type of catalyst is called bimetallic catalyst, which is better than a monometallic one in industrial processes, because it enhances some catalytic features like metal dispersion, activity, selectivity, stability, and lifespan. Different researches have asserted that the bimetallic catalyst increases the yield of the desired branched alkanes and decreases the undesired low-molecular-weight gaseous products. The enhancement of catalytic properties of the bimetallic catalyst is ascribed mainly to the electronic features and geometric structure of nanoparticles of two metals and increases the Lewis acidity and balance between metals and a supporter. In this paper, the theoretical and experimental fundamentals of bimetallic catalysis are reviewed based on many trusted experimental works of different researchers.
The alkylation reaction of aromatic compounds gains considerable attention because of its wide application in bulk and fine chemical production. Aromatics alkylated with olefins is a well-known process, particularly for linear alkylbenzene, phenyloctanes, and heptyltoluene production. As octane boosters and precursors for various petrochemical and bulk chemical products, a wide range of alkylated compounds are in high demand. Numerous unique structures have been proposed in addition to the usual zeolites (Y and beta) utilized in alkylation procedures. The inevitable deactivation of industrial catalysts over time on stream, which is followed by a decrease in catalytic activity and product selectivity, is one of their disadvantages. Therefore, careful consideration of catalyst deactivation regarding the setup and functioning of the process of catalysis is necessary. Although a lot of work has been carried out to date to prevent coke and increase catalyst lifespan, deactivation of the catalyst is still unavoidable. Coke deposition can lead to catalyst deactivation in industrial catalytic processes by obstructing pores and/or covering acid sites. It is very desirable to regenerate inactive catalysts in order to remove the coke and restore catalytic activity at the same time. Depending on the kind of catalyst, the deactivation processes, and the regeneration settings, each regeneration approach has pros and cons. In this comprehensive study, the focus was on discussing the reaction mechanism of 1-octene isomerization and toluene alkylation as an example of isomerization and alkylation reactions that occur simultaneously, shedding light in detail on the catalysts used for this type of complex reaction, taking into account the challenges facing the catalyst deactivation and reactivation procedures.
1 October 2022 in Orbital: the Electronic Journal of Chemistry
The escalating cost of Pt metal has prompted researchers to incorporate other metals into Pt/catalysts to reduce the amount of Pt. In this work, several bimetallic Pt-Zr/HY-zeolite catalysts were prepared by incorporating small amounts of the inexpensive Zr into the Pt/HY-zeolite to form an active and selective catalyst. Results showed that although half of the required platinum metal was used, the catalytic activity of the prepared Pt-Zr/HY bimetallic catalyst was higher than that of the monometallic (Pt or Zr)/HY catalysts, as a result of the improved Lewis acidity of that catalyst that resulted from the addition of the Zr metal; additionally, the branched alkanes' yield also increased. The optimum catalyst was bimetallic, containing 0.5 wt% Pt + 0.5 wt% Zr, which achieved the highest yield of isomers at 70.2 mol%, along with 82.61 and 84.98 mol% for conversion and selectivity, respectively, under 1 MPa and 250°C reaction conditions. In addition, the hydroisomerization reaction kinetic model was achieved, giving good predicted results in agreement with the experimental calculations, with an acceptable relative error. It was found that lower activation energies (about 44.5 kJ/mol) were needed for olefin hydrogenation to iso-paraffins, while higher activation energies were required for i-paraffin hydrocracking (about 138.1kJ/mol).
In this study, a mono-functional ZrO2 nanomaterial was treated with sulfur and loaded with two different percentages of platinum metals (i.e., 0.5 and 1 wt%) to generate an acidic bi-functional Pt/SZrO2 nanocatalyst for the purpose of increasing the catalytic activity and selectivity together. This work aims to determine the least amount of the costly platinum metal that can be added to the catalyst to achieve the appropriate balance between the acidic and metallic sites. Both rapid deactivation of the super-acid nanaocatalyst and fast cleavage of the zero-octane n-heptane chain can consequently be prevented throughout the reaction. This can be achieved by accelerating the hydroisomerization reactions at a pressure of 5 bar to reach the highest selectivity towards producing the desired multi-branched compound in fuel. Several characterization techniques, including XRD, SEM, EDX, BET, and FTIR, have been used to evaluate the physical properties of the catalysts. The best reaction product was obtained at 230 °C compared to the other tested temperatures. The conversion, selectivity, and yield of reaction products over the surfaces of the prepared catalysts followed this order: 0.5 wt% Pt/SZrO2 > 1 wt% Pt/SZrO2 > 0.5 wt% Pt/ZrO2 > 1 wt% Pt/ZrO2 > SZrO2 > ZrO2. The highest conversion, selectivity, and yield values were obtained on the surface of the 0.5 wt% Pt/SZrO2 catalyst, which are 69.64, 81.4 and 56.68 wt%, respectively, while the lowest values were obtained on the surface of the parent ZrO2 catalyst, which are 43.9, 61.1 and 26.82, respectively. The kinetic model and apparent activation energies were also implemented for each of the hydroisomerization, hydrogenation/dehydrogenation, and hydrocracking reactions, which track the following order: hydroisomerization < hydrogenation/dehydrogenation < hydrocracking. The lowest apparent activation energy value of 123.39 kJ/mol was found on the surface of the most active and selective 0.5% Pt/SZrO2 nanocatalyst.
About Me
Dr. Bashir Al-Zaidi is an academic staff member at the University of Technology, Chemical Engineering Department, Baghdad, Iraq.
Dr. Bashir Al-Zaidi is an academic staff member at the University of Technology, Chemical Engineering Department, Baghdad, Iraq.