Hydrogen storage in the solid state represents one of the most attractive and challenging ways to supply hydrogen to a proton exchange membrane (PEM) fuel cell. Although in the last 15 years a large variety of material systems have been identified as possible candidates for storing hydrogen, further efforts have to be made in the development of systems which meet the strict targets of the Fuel Cells and Hydrogen Joint Undertaking (FCH JU) and U.S. Department of Energy (DOE). Recent projections indicate that a system possessing: (i) an ideal enthalpy in the range of 20–50 kJ/mol H2, to use the heat produced by PEM fuel cell for providing the energy necessary for desorption; (ii) a gravimetric hydrogen density of 5 wt. % H2 and (iii) fast sorption kinetics below 110 °C is strongly recommended. Among the known hydrogen storage materials, amide and imide-based mixtures represent the most promising class of compounds for on-board applications; however, some barriers still have to be overcome before considering this class of material mature for real applications. In this review, the most relevant progresses made in the recent years as well as the kinetic and thermodynamic properties, experimentally measured for the most promising systems, are reported and properly discussed.
27 November 2020 in Journal of Materials Chemistry A
Chemical looping has gained increasing attention as an alternative approach for sustainable ammonia synthesis. Nitrogen carriers with high efficiencies are the key to the practical feasibility and competitiveness of this approach. Herein, a multi-functional composite nitrogen carrier composed of Mn nitrides and alkali or alkaline earth metal imides (Li2NH or BaNH) was identified, and it mediated a two-step chemical loop through N2 fixation by the N-poor Mn nitride and alkali or alkaline earth hydride, and the hydrogenation of the N-rich Mn nitride and alkali or alkaline earth metal imides to ammonia. The distinguishing features of this nitride–imide composite nitrogen carrier lie in: 1. the Mn nitride not only acts as a nitrogen carrier but also functions as a catalyst significantly enhancing the kinetics of N2 fixation by hydride to form imide and the subsequent hydrogenation of the imide to ammonia and the hydride; and 2. the hydrides, on the other hand, also facilitate the kinetics of N2 fixation and subsequent hydrogenation of the Mn nitride. These features make the loop highly effective under mild conditions, i.e., at ambient pressure and temperatures below 300 °C; the composite nitrogen carrier Mn2N–BaNH can mediate a loop with an ammonia production rate more than one order of magnitude higher than that mediated by neat BaNH and Mn2N, respectively. Such an ammonia production rate can only be attained by a thermo-catalytic process catalyzed by Cs-promoted Ru/MgO at higher temperature and pressure. This work opens opportunities for the design and development of new types of nitrogen carriers with multiple components and functionalities.