Efficient storage of hydrogen is one of the biggest challenges towards a potential hydrogen economy. Hydrogen storage in liquid carriers is an attractive alternative to compression or liquefaction at low temperatures. Liquid carriers can be stored cost-effectively and transportation and distribution can be integrated into existing infrastructures. The development of efficient liquid carriers is part of the work of the International Energy Agency Task 40: Hydrogen-Based Energy Storage. Here, we report the state-of-the-art for ammonia and closed CO2-cycle methanol-based storage options as well for liquid organic hydrogen carriers.
As a continuation of our previous work [Appl. Opt. 54, 1453 (2015) [CrossRef] ] in which we have studied the performance of coherent free space optical (FSO) communication systems operating over a horizontal path, in this paper we study the coherent FSO system operating over a general slant path. We evaluated system bit-error-rate (BER) in the case when the quadrature phase-shift keying (QPSK) modulation format is applied and when an adaptive optics (AO) system is employed to mitigate the air turbulence effects for both maritime and terrestrial air transmission scenarios. We adopted a multiple-layer scheme to efficiently model the FSO slant-path links. The atmospheric channel fading was characterized by the wavefront phase distortions and the log-amplitude fluctuations. We derived analytical expressions to characterize log-amplitude fluctuations of air turbulence by asserting the aperture averaging within the frame of the multiple-layer model. The obtained results showed that use of AO enabled improvement of system performance for both uplinks and downlinks, and also revealed that it is more beneficial for the FSO downlinks. Also, AO employment brought larger enhancements in BER performance for the maritime slant-path FSO links than for the terrestrial ones, with an additional striking increase in performance when the AO correction is combined with the aperture averaging.
Ammonia (NH3) is a promising clean energy carrier, provided that its production is driven by renewable energy rather than fossil fuel-based Haber–Bosch (H–B) process. Chemical looping ammonia synthesis (denoted as CLAS) can intervene in the ubiquitous scaling relations in catalytic ammonia synthesis by separately feeding reactants to a nitrogen carrier to achieve atmospheric operation, which provides an alternative synthetic route to the H-B process. The key of CLAS is to develop efficient N carrier materials with suitable thermodynamic and kinetic properties. Metal nitrides and metal imides are two kinds of N carrier materials for the CLAS process, and H2 and H2O are commonly used as the hydrogen sources of NH3. Here, we first analyze the thermodynamic properties of the reactions of various metal nitrides and imides with water or hydrogen to produce NH3, N2 fixation on metals or metal hydrides, and the regeneration of metals from metal oxides, respectively. The thermodynamic calculation results display the reduction of main group metal hydroxide, early transition metal oxides, and rare earth metal oxides to the corresponding metallic state or hydrides, the nitridation of late transition metals to the corresponding nitrides, are the thermodynamic limiting steps for the metal nitride carriers. The metal imides, such as lithium imide and barium imide, have the relatively proper thermodynamics for two-step chemical looping reactions, however, their performance is limited by the thermodynamics of hydrogenation reaction. Moreover, for the thermodynamically unfavorable steps in the CLAS, we propose potential electrochemical processes to run the loop, such as molten salt electrolytic cell and solid electrolyte electrolytic cell. Finally, we put forward some strategies, such as controllable synthesis of N carriers and adding efficient catalysts, to improve the kinetics of chemical looping reactions.