In a batch reactor, the EF advanced oxidation decolorization of aqueous solutions of methyl orange MO, a commercial azo reactive textile dye, was investigated in the presence of two different electrodes. The evaluation included various operational variables such as the I_C current intensity (60 mA, 80 mA, and 100 mA), initial concentration of pollutant MO (20 mg/L, 40 mg/L, and 60 mg/L), initial pH of solution (3, 5, and 7), temperature of solution (20 °C, 30 °C, and 50 °C), and initial concentration of catalyst [Fe²⁺] (0.1 mM, 0.2 mM, and 0.3 mM) on the discoloration rate. A Box-Behnken Design of Experiment (BBD) was used to optimize the parameters that directly affect the Electro-Fenton (EF) process. Under the optimal experimental conditions such as [Fe²⁺] = 0.232 mM, pH = 3, I_C = 80 mA, [MO] = 60 mg/L, and T = 30 ± 0.1 °C, the maximum discoloration rate achieved was 94.9%. The discoloration of the aqueous MO solution during the treatment time was confirmed by analysis of the UV-visible spectrum. After a review of the literature on organic pollutant degradation, the EF system provided here is shown to be one of the best in terms of discoloration rate when compared to other AOPs.

Providing efficient and environmental friendly ways to recover lignocellulosic waste remains a challenge around the world. In this study, citric acid-catalyzed hydrothermal carbonization (CHTC) was coupled with pyrolysis to convert date seed (Ds) into adsorbent material. In this regard, a central composite design (CCD) using response surface methodology (RSM) was developed to examine the influence of temperature, reaction time, and catalyst dose on the mass yield (Y_m()) and carbon retention rate (C_RR()) in the produced hydrochars. The optimized hydrochar (OHC-Ds) was obtained under optimal conditions (200°C, 120min, 20mg) and characterized by a Y_m() and C_RR() of 59.71 and 75.84, respectively. Chemical activation by KOH of OHC-Ds followed by pyrolysis at 600°C resulted in an active material (AOHC-Ds) rich in carbon and characterized by a high specific surface area of 1251.5m²/g, with the dominance of mesopores, as well as an amorphous structure comparable to graphite shown by X-ray diffraction (XRD) analysis. Adsorption experiments of two dyes on AOHC-Ds showed a high maximum adsorption capacity (Q_m) of 657.89mgg⁻¹ for methylene blue (MB) and 384.61mgg⁻¹ for methyl orange (MO) compared to other conventional adsorbents. This result is due to the low acidity (pH_pzc) of the surface of AOHC-Ds, which equals 6.75, and its surface, which is also rich in oxygenated functional groups such as (-OH), (C=O), and (C-O) shown by FTIR analysis. These results suggest that the coupling of CHTC and KOH activation followed by pyrolysis is an encouraging way to prepare an efficient and inexpensive adsorbent to remove dyes in wastewater.

This research aimed to measure the impact of provenance on the yield, chemical profile and antimicrobial activity of Rosmarinus officinalis essential oil (EO) collected from cultivated and wild plants from two different regions in Morocco (Fez and Figuig). The chemical composition analysis was...

Coagulation–flocculation, historically reliant on simple inorganic salts, has evolved into a technically sophisticated process that is central to the removal of turbidity, suspended solids, organic matter, and an expanding array of micropollutants from complex wastewaters. This review synthesizes six decades of research, charting the transition from classical aluminum and iron salts to high-performance polymeric, biosourced, and hybrid coagulants, and examines their comparative efficiency across multiple performance indicators—turbidity removal (>95%), COD/BOD reduction (up to 90%), and heavy metal abatement (>90%). Emphasis is placed on recent innovations, including magnetic composites, bio–mineral hybrids, and functionalized nanostructures, which integrate multiple mechanisms—charge neutralization, sweep flocculation, polymer bridging, and targeted adsorption—within a single formulation. Beyond performance, the review highlights persistent scientific gaps: incomplete understanding of molecular-scale interactions between coagulants and emerging contaminants such as microplastics, per- and polyfluoroalkyl substances (PFAS), and engineered nanoparticles; limited real-time analysis of flocculation kinetics and floc structural evolution; and the absence of predictive, mechanistically grounded models linking influent chemistry, coagulant properties, and operational parameters. Addressing these knowledge gaps is essential for transitioning from empirical dosing strategies to fully optimized, data-driven control. The integration of advanced coagulation into modular treatment trains, coupled with IoT-enabled sensors, zeta potential monitoring, and AI-based control algorithms, offers the potential to create “Coagulation 4.0” systems—adaptive, efficient, and embedded within circular economy frameworks. In this paradigm, treatment objectives extend beyond regulatory compliance to include resource recovery from coagulation sludge (nutrients, rare metals, construction materials) and substantial reductions in chemical and energy footprints. By uniting advances in material science, process engineering, and real-time control, coagulation–flocculation can retain its central role in water treatment while redefining its contribution to sustainability. In the systems envisioned here, every floc becomes both a vehicle for contaminant removal and a functional carrier in the broader water–energy–resource nexus.

Iron-doped hydrochar can effectively remove the methyl orange dye (MO). In this study, iron-doped hydrochar (5% Fe@BC) was successfully synthesized through a two-step hydrothermal carbonization (HTC) process, using FeSO₄.7H₂O and sawdust. It was subsequently employed for MO removal. The characterization of the synthesized Fenton-like catalyst (5% Fe@BC) was conducted, using scanning electron microscopy, Fourier-transform infrared and X-ray diffraction techniques to confirm the presence of iron species. The effects of different operating parameters such as catalyst mass, H₂O₂ concentration, solution pH, organic pollutant concentration, and reaction temperature have been examined. The Box-Behnken design combined with three factors: catalyst mass X₁, temperature X₂, organic pollutant concentration X₃. The response surface methodology coupled with Box-Behnken Design was used to optimize the key variables and response. With this approach, an exhaustive assessment of the variables influencing the optimization process was performed. A significant quadratic model was generated through analysis of variance with a P-value of 0.0001 and an R² of 0.99. This confirms a strong relationship between the variables and the response, as well as a high level of model predictability. The optimum conditions were achieved with a catalyst mass of 0.5 g/L, a temperature of 35.5 °C, and an MO concentration of 50 mg/L. The result indicates that 93% of the discoloration efficiency was achieved within 60 min under the optimal conditions. Iron doping in the (5% Fe@BC) plays a crucial role in the degradation and removal of MO. Therefore, the 5% Fe@BC prepared from sawdust and iron salts (FeSO₄·7H₂O) through a two-step HTC process is an inexpensive and effective catalyst for removing organic pollutant from aqueous solutions, using heterogeneous Fenton-like process.

In this study, the effectiveness of using natural bio-coagulants and bio-flocculants to treat textile wastewater through the coagulation-flocculation method was examined. These bio-based agents have several advantages over chemical agents, including biodegradability, natural abundance, low...