In this study, cadmium Sulfide (CdS) thin films were synthesized on quartz substrates using an infrared pulsed laser deposition (IR-PLD) technique under high vacuum (~10−6 Torr) conditions. X-ray diffraction was used to evaluate the structural features. According to X-ray analysis, the deposited CdS films are crystalline and have a favored orientation on a plane (110) of an orthorhombic. The peak intensity and the average crystallite size increases with increasing the film thickness. After annealing at 300 °C, the orthorhombic phase transformed into a predominant hexagonal phase and the same result was obtained by SEM photographs as well. Spectrophotometric measurements of transmittance and reflectance of the CdS films were used to derive optical constants (n, k, and absorption coefficient α). The optical band gap energy was found to be 2.44 eV. The plasma plume formation and expansion during the film deposition have also been discussed. The photocurrent response as a function of the incident photon energy E (eV) at different bias voltages for different samples of thicknesses (85, 180, 220 and 340 nm) have been studied, indicating that the photocurrent increases by increasing both the film thickness and photon energy with a peak in the vicinity of the band edge. Thus, the prepared CdS films are promising for application in optoelectronic field.
In this study, Zn-Al ferrite/polypyrrole (PPy) nanocomposites were synthesized and thoroughly characterized to explore their potential for microwave applications. X-ray diffraction analysis confirmed the presence of ZnO, AlFeO3, and Fe2O3 phases, with the crystal size decreasing from 31 nm to 19.6 nm as aluminum content increased. High-resolution transmission electron microscopy (HR-TEM) revealed a distinctive core–shell morphology, where the polypyrrole encapsulates the ZnAlxFe2−xO4 particles. Magnetic measurements showed that decreasing aluminum concentration led to a reduction in both saturation magnetization (Ms) from 75 emu/g to 36 emu/g and remanent magnetization (Mr) from 2.26 emu/g to 2.00 emu/g. Dielectric analysis indicated that both the real (ε′) and imaginary (ε″) components of dielectric permittivity decreased with increasing frequency, particularly between 10 and 14 GHz. Furthermore, electrical modulus analysis highlighted the significant impact of aluminum doping on relaxation time (τIP), indicating the presence of interface polarization. Impedance spectroscopy results underscored the dominance of interface polarization at lower frequencies and the presence of strong conduction paths at higher frequencies. These combined magnetic and dielectric loss mechanisms suggest that the Zn-Al ferrite/polypyrrole nanocomposite is a promising candidate for advanced microwave absorption applications.
Supercapacitors but suffer from low specific capacity and poor rate capability due to limited electrical conductivity. Herein, a zeolitic imidazolate framework (ZIF-67) was employed simultaneously as a cobalt source and a sacrificial template to direct the room-temperature hydrolysis of Ni²⁺ ions, leading to the formation of interwoven Co–Ni LDH nanosheets with enhanced electrolyte-electrode interaction and accelerated ion transport. Incorporation of carbon nanotubes (CNTs) markedly improved conductivity and charge-transfer kinetics, with the optimized CNC30 electrode delivering 870 F g⁻¹ at 1 A g⁻¹ and retaining 85% capacitance at 10 A g⁻¹. Electrochemical impedance spectroscopy confirmed a significant reduction in charge-transfer resistance from 1.37 Ω to 0.49 Ω upon CNT integration. Further enhancement was achieved by introducing ZIF-67, as CNCZ30 exhibited 902.7 F g⁻¹ at 1 A g⁻¹, with 72% retention at 10 A g⁻¹. Notably, CNCZ30 demonstrated excellent durability, maintaining 96.6% of its initial capacitance after 7000 cycles. These results highlight the synergistic effects of CNTs, LDHs, and ZIF-67 in boosting conductivity, active surface area, and redox activity, positioning Co–Ni LDH/CNT/ZIF-67 composites as promising electrodes for next-generation supercapacitors.