This study proposes a novel modified grey-wolf optimization algorithm (MGWOA) to enhance power system stability. The power system stabilizer and static synchronous series compensator (SSSC) are used as damping controllers. Additionally, fractional-order PID (FOPID) controller is used to handle the system nonlinearities and thus achieve better performance. The control parameters are tuned using the proposed MGWOA method which has been verified on unimodal and multimodal functions. Single-machine infinite bus (SMIB) and multimachine power system (MMPS) are taken as case studies to analyze the efficacy of the proposed controller. Minimization of rotor speed deviation is considered an objective function. The results obtained from the MGWOA-tuned FOPID-based damping controllers are compared with those obtained using recently developed efficient and competitive heuristic algorithms. It was observed that the MGWOA method is well-suited for damping low-frequency oscillations. Furthermore, statistical analysis is performed on the obtained results to justify the superiority of the MGWOA method. The simulation results suggest that the MGWOA exhibits superior performance characteristics when applied to a real power system.
The wide area situational awareness attempts at the expeditious detection of imminent system abnormalities and alerting system operators to take appropriate measures. Because the critical situation may arise in a system due to faults on transmission lines spanning over a long distance, phasor measurement units (PMUs) have become an indispensable measuring device to provide a dynamic view of such a wide area system. In this paper, the perception about a 200 km long transmission line has been achieved with the help of phasor measurements from PMU, which has the capability of reporting 200 phasors per second. The comprehension about the perceived event is accomplished by computing the deviations of current phasor magnitude as well as phase angles derived from synchronized phasor measurements using the phaselet algorithm. Based on the comprehension of the perceived event, a specific type of fault has been predicted using the Gaussian Naove Bayes approach. In order to validate the proposed methodology, it has been implemented on a laboratory setup.
25 July 2023 in International Transactions on Electrical Energy Systems
Accurate parameter identification plays an integral role in the modeling of an optimized solar module which in turn helps in the error-free prediction of its output. Five important parameters: the photoelectric current (Iph), ideality factor(α), saturation current (Io), series resistance (Rs), and shunt resistance (Rsh) are required for the accurate modeling of the PV cells/modules and need to be extracted as these parameters are not provided by the manufacturer in the datasheet. This paper proposes a new metaheuristic jellyfish optimization (JFO) algorithm for the parameter extraction of a solar module. The JFO algorithm achieves the optimal solution without being trapped in local solutions in less time. The parameter extraction using the JFO algorithm is done on two different solar modules i.e., Soltech-1STH-215P and PWP-201. The results are compared in terms of extracted parameters (Iph, α, Io, Rs, and Rsh) with the well-known optimization techniques like PSO, GA, and others available in the literature and with the manufacturer IV and PV characteristics. The proposed technique IV and PV characteristics are validated at different environmental conditions and are found to be similar to that of PSO and GA. It is also observed that the extracted parameters obtained using JFO are comparable with the other twenty-two techniques, and the proposed technique is one of the highly efficient techniques that can be utilized for parameter extraction of PV modules and to predict solar cell characteristics for all commercial modules without setting up any experimental measurements. MATLAB/simulation software is used for implementation and performance validation.
The global concerted effort toward achieving carbon neutrality has given impetus to the accelerated growth of renewable energy sources with government patronage. The smart grid has the mandate to integrate renewable energy sources adeptly toward meeting the vision of carbon neutrality by 2050 in many countries. Solar energy generation has emerged as one of the most viable options due to the rapid stride of innovations in this domain as well as due to the decreasing trend of the cost of photovoltaic (PV) technology. However, the uncertain sunlight leading to uncertain solar energy generation with a low-capacity factor has been a challenge to maintain the legacy reliability of the power system. Unlike a two-state model being used for analyzing conventional generators, a multistate model has been proposed for incorporating the random variation of solar energy generation correlating with random irradiance. An innovative approach for formulating probabilistic modeling of solar energy is implemented to evaluate different reliability indices such as loss of load probability (LOLP) and expected energy not served (EENS). Different case studies with results prove the efficacy of the proposed probabilistic model–based availability of solar power generation due to solar irradiance uncertainty along with interaction with stochastic load model on smart grid reliability and carbon neutrality.
12 September 2023 in International Transactions on Electrical Energy Systems
In modern power systems, there is a greater penetration of renewable sources, resulting in the expansion of microgrid. By implementing RES instead of conventional synchronous machines, the systems overall inertia is significantly reduced. Modern and future power systems must reduce system inertia and keep the frequency at its nominal value since frequency oscillation impacts on the functionality, stability, and resilience of the system. Therefore, creating a stable, scalable, and reliable virtual inertia control system is crucial to effectively minimize the deviations during significant contingencies. Consequently, taking into account the probable issues, the foremost objective of this research work is to improve the dynamic security of an island microgrid through the implementation of a frequency control concept based on virtual inertia control. In the research study, the proposed microgrid system comprises of photovoltaics, wind-generating units, thermal power units, storage units, electric vehicles (EVs), and loads. A cascaded PIDFN controller is optimally designed using a novel metaheuristic modified differential evolution (MDE) algorithm that regulates the frequency based on virtual inertia control. In the MATLAB®/SIMULINK environment, various operating situations such as load variations, RES, and EVs disconnection are investigated, and the performance of the VIC-based MDE controller was compared to that of other controllers based on evolutionary optimization algorithms such as DE and TLBO. The results validate that the recommended virtual inertia control strategy enhances the reliability of the system.