In this paper, a pentagon slot inside fractal circular patch microstrip resonator to design compact antenna over partial ground plane is introduced using 3rd iteration of adopted fractal geometry. This antenna is modeled on FR4 substrate with a size of (20 x 18) mm2, thickness of 1.5mm, permittivity of 4.3 and loss tangent of 0.02. The used type of feeding is microstrip line feed. It is designed to operate at wide frequency range of (4.5-9.3) GHz at resonant frequencies of 5.7GHz and 7.9GHz with impedance bandwidth of 4.8 GHz. Both lengths of ground plane Lg and width of feed line Wf are optimized in order to acquire optimum bandwidth. The simulated return loss values are -33 and -41 dB at two resonant frequencies of 5.7 and 7.9 GHz with gain of 3.2 dB. The simulated results offered noteworthy compatibility with measured results. Also, the proposed wideband microstrip antenna has substantial compactness that can be integrated within numerous wireless devices and systems.
In this paper, a miniature rectangular microstrip antenna over partial ground plane is presented by utilizing a space-filling property of fractal geometry in this design. It is simulated by High Frequency Software Simulator (HFSS) software, fabricated and tested by Vector Network Analyzer (VNA).Two types of slots are introduced in order to enhance antenna parameters such as bandwidth and return loss S1.1. This antenna is fabricated on FR4 substrate with a small size of (18 x 16 x 1.5) mm3, 1.5mm substrate thickness, 4.3 permittivity and 0.02 loss tangent. To feed this antenna, microstrip line feed is used. This antenna is implemented for wide bandwidth (4.8-11.6) GHz, and has three resonant frequencies at 5.5GHz, 8.3GHz and 10.7GHz with impedance bandwidth of 6.8GHz. The gap value g between partial ground plane and rectangular patch at top layer is optimized in order to achieve optimal simulated return loss S1.1 is (-46,-32,-14) dB at three resonant frequencies (5.5, 8.3, 10.7) GHz and optimal radiation efficiency of 93.42% with gain of 3.63dB. The simulated results have tolerable agreement with measured results. This antenna is suitable for wireless computer applications within C and X band communications.
1 January 2022 in Indonesian Journal of Electrical Engineering and Computer Science
The design of a millimeter wave (mmW) antenna for the 5G mobile applications is presented in this paper. The designed antenna has dimensions of 10×10×0.245 mm3. This includes the copper ground plane. The resonance of the proposed mmW antenna lies within the range of 33 GHz and 43 GHz. These frequency bands are covering the 5G proposed band in terms of the signal speed, data transmission, and high spectral efficiencies. Computer simulation technology (CST) software is used to simulate the proposed 5G antenna including the characteristics of S-parameters, gain, and radiation pattern. Simulation results show that the return loss at resonant frequencies goes -22 dB, which satisfies the requirements of 5G mobile technology.
1 February 2020 in IOP Conference Series: Materials Science and Engineering
This paper analyses the signals propagation characteristics and the most important obstacles that encountered these signals when transmitted from outdoor to indoor (O2I) antennas for the college buildings. These buildings consists of several floors and built in the 3D form according to the real dimensions. In this study, we used measurement analysis and a ray-tracing simulation model approach based on the use of the Wireless InSite (WI) software. The use of different frequencies related to the fifth generation (5G) which are 10, 17, 30 and 60 GHz. According to the results that appeared, it is observed the increase in frequency will lead to an increase in path loss, decrease the received signal strength (RSS). There is an inverse relationship between frequency increase and delay spread and an inverse relationship between frequency increase and received power. In addition, we noticed that there is a direct correlation between frequency increase and path loss, where increasing frequency will increase the path loss, decrease delay spread and received power. Finally, the building’s barriers work on obstructing the direction of the signals path and dispersion of the received signal strength (RSS).
1 February 2021 in Journal of Physics: Conference Series
With the increasing demand for recent lifestyle new achievements have been developed in various fields of science and technology, target localization is considered one of the most important subjects especially in indoor conditions since most of the social activities done in the indoor environment. The presence of large buildings such as hospitals, malls, schools and other facilities of modern life increases the need for accurate target positioning. In this paper, a proposed system included simple equipment on three transmitters and some computer packages are used to apply our experiment. The case study chosen in this work is simulated using Wireless InSite (WI) software to model the campus with its all building. Three transmitters (TXs) are installed in selected position while twenty receivers (RXs) are deployed randomly as a target to estimate their position utilizing Time of Arrival (ToA) and Received Signal Strength (RSS) to estimate distance then trilateration is applied to determine target position with Angle of Arrival (AoA). The achieved result is addressed using specific equations to estimate the target positions.
1 October 2022 in Indonesian Journal of Electrical Engineering and Computer Science
The demand for the array antenna that consists of multiple ports has increased in recent years, because of its main importance in reducing noise and interference between users. In this paper, we propose a new method for designing an 8×8 (16-ports) multi-input and multi-output (MIMO) antenna. This method relied on the Micro Strip mechanism so that we presented a small antenna that operates at wide and multi-bands of millimeter waves (Mm-Waves). According to the information curves generated by the CST experimental software, it was observed that the proposed antenna operates well from 36 to 60 GHz. Therefore, the antenna achieved the best results in terms of many most important parameters, the reflection coefficient is <-10 dB, return loss is <-25 dB, and voltage standing wave ratio (VSWR) is < 2. In addition, the efficiency of the antenna for all frequencies from 70% to 97%, the envelope correlation coefficient (ECC) is <0.001, and the diversity gain (DG) is 10 dB for all frequencies, while the maximum gain achieved by the antenna is 9 dB at 46 GHz. All these good results achieved by the antenna make it the prominent and potential element in most of the future 6G wireless communication systems.